Reviews
Mirror by Yamaha
This is something that is inevitably needed because Yamaha's Mirror uses Opposite Thread Screws. View detail
Yamaha's Opposite Thread Screw A must-have for cars
I purchased this product when I switched to Napoleon OnMirror because my OEMMirror was rusting.
The Mirror position is slightly higher, but it was successfully installed.
View detail
Honda old for VehicleMirror installed on CUBC125 (JA58)
Installed a hand-held old Honda Mirror (8mm positive thread)
OEM 10mm Mirror with reverse thread 10mm Handlebar side with positive thread
So I looked for an Adapter with 8mm Mirror side positive thread and 10mm Handlebar side positive thread.
Equivalent to Tanax CM-2 Easy to install, just remove and replace OEM
I like it because it looks Classical.
View detail
Adjust Mirror position
Spacer is included to accommodate multiple handlebar diameters.
Because of the Spacer of the genus Gold, it may damage the Handlebar in some cases.
Convenient for adjusting the angle and position of Mirror.
View detail
Useful accessories
There would be interference if I directly install TANAX AOS4 rearview mirror on my motorcycle, so I also bought this TANAX heightening screw accessory, which can be perfectly installed. Although it is a small accessory, the workmanship is fine without burr, which is very good. View detail
For Mirror Replacement
I purchased this product to replace Mirror on my SR400.
It inevitably stands out because of its height…
View detail
Fitting accessories
My motorcycle is a YAMAHA NMAX155 2021 model. I modified the TANAX AOS4 rearview mirror. If this heightening screw is not used, the AOS4 rearview mirror will touch the brake oil tank. This height-increasing screw is just right to increase the height by 2CM, and this screw has a variety of specifications suitable for the rearview mirror seat threads of various motorcycles. The left side of NMAX155 is the straight tooth, and the right side is the reverse tooth. -------------------------------------------------- -------- My motorcycle is Yamaha Nmax155 2021. I modified the TANAX AOS4 rearview mirror. If you do not need this to increase the screw, the AOS4 rearview mirror will touch the brake oil pot. This increased screw increase is just right, and this screw has multiple specifications that are suitable for various motorcycle rear -view mirror threads. NMAX155 is on the left is the positive teeth and the right side is against the teeth. Powered by Google Translator View detail
Opposite Thread Screw Adapter
I purchased the Opposite Thread Screw Adapter because it is essential for Yamaha cars.
However, the Mirror position is higher due to the Adapter, so it would be better to have a lower Adapter.
View detail
Design is good
This is a quintessential Tanax.
It is an itchy product.
Quantity:I would be more than happy if they were sold in 1pc. units instead of 1 set of 2pcs.
View detail
Convenient
Mini bikes are mostly 8mm and Mirror itself is mostly 10mm, so this would be very helpful. View detail
Wrong!
I was going to use it for CRM80 but I mistakenly bought 10?→8?
I may use it someday, so I will put it to sleep in Garage.
I later purchased one that fits properly.
View detail
Opposite Thread Screws for YAMAHAfor Vehicle
As others have mentioned, I bought this one because One Side Mirror for YAMAHA cars uses Opposite Thread Screws.
I think we need to consider how Mirror should be used, since the mounting height will be changed, so we need to calculate that as well.
I used another Mount with an Adapter to make it UnderMirror.
View detail
TANAX NAPOLEON TANAX NAPOLEON SlimStainless
Used to mount Mirror with different Screw diametersMaterial:I am satisfied with the Stainless Steel, which is more rust resistant and looks better than steel. View detail
Fits perfectly with Plating mirror!
Required for UniversalMirror installation.
If there are many plating parts on a classic custom car such as a cafe racer, it is necessary to use a plating adapter or it will float.
The durability is fine and the finish is good for the price, so it's a commendation!
View detail
It is a must for Yamaha cars.
It is just a conversion Bolt but it scratches easily. monkey Wrench should not be used. It gets scratched easily. View detail
Scratches easily
Purchased for Mirror replacement.
I had heard that it was prone to scratches, so I worked with caution, but the scratches were firmly in place.
It's a cheap product, so maybe it can't be helped, but I'd like it to be made a little sturdier.
View detail
It is a reliable Napoleon On product.
This product is a trusted Napoleon product and you can rest assured that the Adapter will be high, so that's a Point that needs attention! View detail
Mirror bolt
I purchased this bolt to change the diameter of the Mirror bolt. I recommend TANA-X's Bolt for Mirror bolt conversion because they have a wide variety of bolt types. View detail
Kills two birds with one stone by adjusting the height as well.
[How is it used?
Used to install Mirror from Other Brand Product, a must have for Yamaha vehicles. I have used it on various Yamaha cars.
Was the one you received as per Image?
The surface is cast iron with a semi-glossy painting, so it blends in with the surrounding parts.
Was the installation difficult?
Pimping. When installing Napoleon's Shark Mirror 1B, the Right Side had to be raised because the Accelerator Wire and Mirror Bracket interfere with each other, and the height of the Opposite Thread Screw Adapter was too high. The 20mm length was just right.
How was your experience with it?
The Mirror is now installed Refreshingly, and the eye movement distance is slightly reduced because the Mirror is slightly higher.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It doesn't now that it is installed, but it is susceptible to rust and will rust in less than a year if it is not well cared for after rain (in my experience so far).
Other items that would be helpful
Opinions and requests to Manufacturer:Material already in your products:There is a Stainless Steel Opposite Thread Screw Adapter, but please release a Black Dyed Stainless Steel Opposite Thread Screw Adapter even if it is a little expensive. It's my dream for many years.
View detail
CT125 CT110 HUNTER CUB Quantity:Pair (for Left and Right) Exactly to align Mirror back and forth
[How is it used?
The OEM LeftMirror Holder is located closer to the front (body side) than the Right Mirror Holder, which reduces visibility.
Quantity:Pair (for Left and Right) The LeftMirror Holder was introduced to shift the LeftMirror Holder forward because of the uncomfortable difference in the front/rear position in the
Was the one you received as per Image?
The surface has a luster feel, and I felt it had a higher quality feel than the OEM Mirror Holder.
How was your experience with it?
As per Image, Quantity:Pair (for Left and Right) The difference between the front and rear at the left and right mirrors is no longer a concern, and the LeftMirror is now in front of the
Rearward checks are now easier.
There was no change in Mirror vibration while driving.
View detail