Reviews
Best Match for LEAD125
Used for LEAD125.
Installed in place of the OEM standard Adapter.
It is just the same height as Cowl.
If it is too high, it will be necessary to remove the Adapter when removing the Cowl for LeverMaintenance, Headlight Bulb replacement, etc. However, the Cowl can be removed by removing only the Mirror part without removing the Adapter.
(Since the OEM Adapter is long, it is necessary to remove the Mirror Adapter when removing the Cowl.
In my case, I used a low strength screw lock to prevent the Adapter from spinning when adjusting the angle of the Mirror.
View detail
The number of pieces at the time of purchase 1 is a Single ItemQuantity:Pair (for Left and Right) Not, and Size is careful.
It is only marked 13mm, but it is for 13-17mm
Single Item, so Quantity:Pair (for Left and Right) The quantity to fit in:2pc. Set required
I'm a newbie to Motorcycle, so I didn't know what to expect, so I just bought it and it was a Single Item.
The Handlebar inner diameter is only 13mm, but it is for 13mm-17mm.
Please note that it takes quite some time.
Webik should be a bit more annotated.
View detail
Good texture
Bought it to install the Mirror for the SR400 on the CD125TBENLY50.
I was able to install it with no problems.
It can't be helped, but be aware that the height of the Adapter makes the Mirror more expensive.
For that reason, I think the Mirror Bracket should have a lower height.
View detail
Installed on TOWN MATE 90
I bought it because it's a Yamaha Motorcycle and it's an Opposite Thread Screw
The OEM was broken, so I replaced it with the Mirror of Napoleon On as well, but it doesn't come on without it.
I bought the Plating one because Mirror is Plating, so I matched it!
The Mirror is a little higher, but I had no problem with it.
I also added Bracket Boots as well, so I guess it was just as well.
View detail
Fits: MV AGUSTA BRUTALE 11, MV AGUSTA BRUTALE 11
External mirrors can be installed.
F4-BRUTALE cannot be installed on an external mirror.
BARRACUDA Barracuda Mirror Adapter (Pair) It is possible to install an external Mirror by using
However, since it is a blinker-integrated Mirror, the blinker needs to be placed separately.
That's part of the fun.
View detail
Required for Bar end mirror installation
I used it to attach a Bar end mirror to my F4-BRUTALE800.
I'm happy with the clean fit.
The finish is beautiful and F4-BRUTALE is designed like a DRUG STAR.
View detail
Is this what it looks like?
I'd like you to release the Black Anodized in Aluminum.
Also, Quantity:Pair (for Left and Right) I'd like to see the total weight published.
Previously. It's about making the bike lighter and losing weight yourself! And there was an article about...
View detail
If you just want to use it, this will do the trick!
You may want to relocate Mirror quite a bit and use it, right?
With OEMs, it's often attached to the switch box or rebar clamp, and this is handy when you want to get it out of the way.
This type of product is available at PinDrill, but if you just want to relocate it, this is good enough for you.
View detail
Repeat
I had the same one on, but I had to repurchase and reinstall it to change the angle.
However, the bolt is too thin and the torque-tightening torque is not enough, and when the weight exceeds 100kg, the Mirror turns around due to wind pressure.
It's a shame that it's so weak.
I drilled the hole to the Handlebar and screwed the Bolt in.
Last time I was cutting from the top and there is a hole in the handlebar, so this time I cut from the bottom.
If you do this, you won't be able to fine-tune it and you won't be able to get it back, so make sure it's in the Mirror adjustment range and drill the holes.
I... No one does. (+o+)
View detail
To avoid the Master CylinderTank
When I bought a Tanax Napole OnMirror and tried to install it on the GSX-S1000F, it interfered with the Master CylinderTank of Brake and I couldn't install it, so I bought this Adapter and added the height to it.
Although there is nothing to write home about in terms of performance, I think Tanax is a reliable manufacturer that you can buy from in the sense that they have such parts that can be fine-tuned.
View detail
A must-have for Yamaha
Most mirrors on the market are not Opposite Thread Screw.
But Yamaha has Opposite Thread Screw, why? Aside from the reason for this, I'd like to see a commonality in these areas.
Now, this Adapter is a necessity for the Yamaha cars. It may be a little bit high on the Mirror, but that's okay.
View detail
It might not look good on the OEM Mirror, which has a thicker root in recent years.
I bought this product, which is the only corrective part, because the angle of the Mirror Holder became bad due to the Custom, and I couldn't see the rearward vision in the adjustment range of the Mirror.
I used to use the OEM Mirror for the ZRX1200R, but the thicker base made this Adapter look less balanced.
Since the Mirror was replaced, we rejected it this time.
It does not correspond to Japanese Vehicle Inspection.
This may be the only HURRICANE Parts for Mirror, but it was a product not carried by the local Naps.
View detail
There's no problem, sir.
The Plating has a nice texture and the installation was completed comfortably.
It was a perfect match for Mirror.
Thank you for taking it for granted!
View detail
Only the surface finish is disappointing
Purchased in place of the too expensive brembo OEM Mirror Holder
It would be helpful if the colors were displayed more clearly
Personally, I'd rather have all the colors Shot blast applied in advance to give it a cast-iron look I don't think it's strange to match with Master Cylinder, but …
Basically, I think Design is a finish that only fits the slippery shaving MASTER!
View detail
Mount 8mm Mirror to 10mm Handlebar
[Was there anything that disappointed you? Because the Screw of Mirror is too long or the Adapter has bottomed out, I put a bolt on it I did
Do you have any wishes or improvements you would like to make for the Manufacturer? If the female thread on the Mirror side is longer, BEST
[Do you have any products to compare it to? None
Frequently Asked Items
What made you decide to buy? I don't know if there is an 8mm Mirror set screw or a 10?Handlebar set screw adapter No
How was your experience with it? perfectly (suited)
Was the installation difficult? None
【Please tell me the installation point and hang】 None
[Was the Instruction Manual easy to understand? None
[Included Parts:were they on? Warranty Is it really necessary?
[Others] So it's currently out of stock
View detail
Reactly for Low typeMirror visibility
Used for HUNTER/Low AndNarrowMirror
I liked the design, but the Mirror is so low that you have to look into it to see what's behind you I was wondering if I should replace the Mirror as I didn't have one, and then I found this product
The result is very good visibility
It was easy to install with good accuracy and I recommend it
View detail
Mirror View Widening to Large
A little more Mirror on the outside would have made it easier to check the rear, but it helps in those situations
Material:The influence on the Handling is small because it is Aluminum and Large and light
You can also choose two different mounting heights for the Mirror, so fine adjustment of its position is also possible
But the Bolt that comes with it is a bit cheesy
A low head Bolt would have looked much better
View detail
Repeat
I bought it again because I bought it before and it was good The installation is solid, so I bought a bracket for different purposes on top of this one and the Camera I put it on and load my phone on it The other Holders feel too delicate to use anymore View detail
tightly packed
It is good if it becomes a little more Smallish, but because it can be fixed to Handlebar firmly I am very happy with it and it is stable even with a large piece of hardware installed View detail
Using it differently than it should be used
I used it to extend the rear suspension attachment point of MONKEY If you put the exhaust bracket in between the bolts, you can only tighten up one or two suspension bolts It is not
Both Sides female screws for extension to Exhaust Bracket installation You can buy the attachment but it costs about 1,000 yen
Pitch of MONKEY's suspension bolts is 1.25
Attachment is p1.25 when the Screw is cut off by Penetrating it I think, but home center usually sells only 1.5-pitch bolts for M10s I don't have one, so I have to buy the Bolt on the other side at the Screw store
This will allow you to use it directly on the suspension mounting bolts, and you can use it to fix the suspension in place of the original The OEM Cap Nut can be used as is (Depending on the thickness of the exhaust bracket, it may be possible to tighten the cap nut as is (It may be Penetrating, so adjust with Washeretc
View detail