Reviews
Body side Opposite Thread Screw 10mm/Mirror side Opposite Thread Screw 10mm
When I installed DAYTONA's Screen on KTM DUKE200, the Bolt was by Masane, and I couldn't get it on without Adapter, so I bought an Adapter Set of Normal Thread Screw→Normal Thread Screw for Left Side and Opposite Thread Screw for Right Side. I bought Napoleon's Adapter Set of Screw→Normal Thread Screw, and Mirror was bolted to the Screen stay.
The screen is removed and the Mirror is directly attached, and the Left can be used, but the Right cannot use the adapter of the Opposite Thread Screw→Normal Thread Screw, and the Opposite Thread Screw→ is required. However, it is not available in Napoleon On. However, Napoleon On does not have it, and this is the one I found when I looked for it.
It's very convenient to return by Rose!
The left is 20mm for Napoleon On and 18.5mm for this product, but this is an error. The difference at a glance is that the Napoleon-On is a 17mm spanner and this product is a 14mm spanner.
View detail
Rose is for sale.
When I replaced the mirror, I didn't want to see the OEM PlatingScrew sticking out of the cover, so I bought this one, which was sold by Rose, because Napoleon On does not have both forward and reverse. It is a problem. View detail
Adjust Mirror position
Spacer is included to accommodate multiple handlebar diameters.
Because of the Spacer of the genus Gold, it may damage the Handlebar in some cases.
Convenient for adjusting the angle and position of Mirror.
View detail
Useful accessories
There would be interference if I directly install TANAX AOS4 rearview mirror on my motorcycle, so I also bought this TANAX heightening screw accessory, which can be perfectly installed. Although it is a small accessory, the workmanship is fine without burr, which is very good. View detail
For Mirror Replacement
I purchased this product to replace Mirror on my SR400.
It inevitably stands out because of its height…
View detail
Elimination of long-standing problems
Product Name
MirrorOffsetHolder for 10mm
Item Number
27292419
Vehicles
Grom (JC61)
Number of man-hours
Around 20 minutes
Required Tools
Torque wrench, Hexagonal socket, Combination wrench, Pliers system
Why did you choose this product?
There were other products that extend the length horizontally, but this was the only one that also extends the height. Also, it was available in black and looked luxurious. Also, I had a feeling of trust in the product because Grom's name was mentioned in the Impression section.
Was the one you received as per Image?
It was just as shown in the Image. It looks good with a sense of luxury.
Was the installation difficult?
It was easy:just remove the screw, select the size screw that fits the screw hole, and install it.
How was your experience with it?
The long-standing problem of not being able to see Mirror has been resolved. I was worried about not being able to see what was going on behind me, and I felt it was a hassle to bend my elbows every time I had to do it. It was also very easy to install the pons without changing the position of the wiring such as throttle wire.
[Included Parts:were they on?
There were some things written on the documents etc., such as screws.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Only Yamaha can do it.
Since RoseRose is the way to sell Mirror by Manufacturer, I would like Adapter to think of various combinations and sell them as well. View detail
Fitting accessories
My motorcycle is a YAMAHA NMAX155 2021 model. I modified the TANAX AOS4 rearview mirror. If this heightening screw is not used, the AOS4 rearview mirror will touch the brake oil tank. This height-increasing screw is just right to increase the height by 2CM, and this screw has a variety of specifications suitable for the rearview mirror seat threads of various motorcycles. The left side of NMAX155 is the straight tooth, and the right side is the reverse tooth. -------------------------------------------------- -------- My motorcycle is Yamaha Nmax155 2021. I modified the TANAX AOS4 rearview mirror. If you do not need this to increase the screw, the AOS4 rearview mirror will touch the brake oil pot. This increased screw increase is just right, and this screw has multiple specifications that are suitable for various motorcycle rear -view mirror threads. NMAX155 is on the left is the positive teeth and the right side is against the teeth. Powered by Google Translator View detail
Installed on a JC75 Grom. Long-standing problem of not being able to see the back well has been resolved.
Many of you may have had a near-miss with the poor rearward visibility that seems to apply to most moped models.
Since the handlebar width is narrow due to the small size of the vehicle, the OEMMirror is too far inward to see the back of the vehicle due to the obstruction of one's arms and shoulders.
Depending on the shape of the Mirror, it can be much better, but still, your body will be slightly reflected in the Mirror.
This product can be attached to the base of Mirror to offset Mirror to the outside for rearward visibility.
Material:It's Aluminum and lightweight, so it doesn't affect handling.
Bolts of M8 and M10 are included and can be installed on most motorcycles. Some models may require an Opposite Thread Screw Adapter.
My impression of the installation is that my arms used to appear in Mirror, but now only the back of the camera is completely visible.
It is ridiculous that I have had to put up with this for three years now.
Of course, the Mirror is Offset to the outside, which will affect the slip-through. You are on your own in this area.
It is considered a good product with excellent cost performance.
View detail
Opposite Thread Screw Adapter
I purchased the Opposite Thread Screw Adapter because it is essential for Yamaha cars.
However, the Mirror position is higher due to the Adapter, so it would be better to have a lower Adapter.
View detail
Height adjustment
I bought a pair of mirror and did not notice the mounting on the left hand side is lower. As such, I need a higher adapter. Quality wise is quite solid and good but shipping is a bit pricey. View detail
Hmmm... subtle color difference.
[How is it used?
I bought this clamp to install on my brembo RCSRadial master. bremboOEM's MirrorHandlebar clamp (part number 110.A263.90) has a list price of 6,160 (tax included) Since the Mirror Adapter costs $3.99, it was stupid to spend a large amount of money on a Mirror Adapter, so I decided to endure with a patrimony (laugh).
Was the one you received as per Image?
The slightly different color is nice and looks like a pachimon! (Nice!)
Was the installation difficult?
Unfortunately, bremboOEM Bolt is not available (crying)
As you can see in the photo, the screw hole on the lower side of the Adapter comes in contact with the Bolt's flange, so the Bolt cannot go all the way into the Adapter. Well, in any case, it is an anti-theft material.:I was going to replace it with a Stainless SteelTorx bolt, though, so that's not a problem. Besides, bremboOEM bolt is just steel.
How was your experience with it?
No problem at all! If you look at it from 2 meters away, you can't tell the difference in color! (LOL)
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Where the colors are subtly different (laughs).
But Cost performance is top notch, so no problem!
Other items that would be helpful
Items to buy together:bremboOEM bolt is just steel, so it is recommended to replace it with a Stainless bolt.
Opinions and requests to Manufacturer:Please make it more like bremboOEM colors and master the path of pachimon! (LOL)
View detail
Design is good
This is a quintessential Tanax.
It is an itchy product.
Quantity:I would be more than happy if they were sold in 1pc. units instead of 1 set of 2pcs.
View detail
Used for Mirror of the same Brand
[How is it used?
Used for Mirror of the same Brand.
Was the one you received as per Image?
Yes, it could be used normally.
Was the installation difficult?
It is easy because all you have to do is turn it.
How was your experience with it?
It's working fine
[Included Parts:were they on?
Adapter only.
View detail
Fits: BMW S1000R, BMW S1000XR, BMW F850GS Adventure, BMW S1000R, BMW S1000XR, BMW F750GS, BMW F850GS, BMW RnineT, BMW F800R, BMW F800GS Adventure, BMW F700GS, BMW F700GS, BMW F800R, BMW S1000R, BMW RnineT, BMW R1200R, BMW R1200GS, BMW F650GS, BMW R1200GS, BMW R1200R
Used for Mirror position adjustment
It was matte and rough, not the smooth look I had imagined from the picture.
It is expensive, but I am happy that I put it on.
View detail
Convenient
Mini bikes are mostly 8mm and Mirror itself is mostly 10mm, so this would be very helpful. View detail
Wrong!
I was going to use it for CRM80 but I mistakenly bought 10?→8?
I may use it someday, so I will put it to sleep in Garage.
I later purchased one that fits properly.
View detail
Opposite Thread Screws for YAMAHAfor Vehicle
As others have mentioned, I bought this one because One Side Mirror for YAMAHA cars uses Opposite Thread Screws.
I think we need to consider how Mirror should be used, since the mounting height will be changed, so we need to calculate that as well.
I used another Mount with an Adapter to make it UnderMirror.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus
General OEM Parts.
[How is it used?
Mirror and for the change from 8 to 10.
Was the one you received as per Image?
As you can see in the Image, the YamahaOEM seal was affixed and sealed tightly.
It was a Conversion Adapter as per Image.
Was the installation difficult?
It would be easy for someone who can remove Mirror.
The one with a notch is the Right Side Screw, and the one without a notch is the Left Side Screw.
How was your experience with it?
I am very satisfied with the Large size without any blurring.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
None
[Others]
This is OEM Parts, so there is no Instruction Manual, etc. Parts only.
View detail
Fits: HARLEY-DAVIDSON FrontFork Clamp Bolt with 3/8-16 threads
Very good quality!!
Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!! View detail