Reviews
Used for DT50Mirror BracketBoots.
I replaced the MirrorBoots on my DT50 because they had deteriorated. To replace the MirrorBoots, remove the screws from the MirrorBoots, remove the MirrorBoots, and install the MirrorBoots. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
It is a natural assertion without feeling like it is a Cover (can be installed on the '24 model).
I was thinking of replacing the Mirror with Other Brand Product sooner or later, but when I got on the car and saw the visibility and the difficulty of adjustment of Other Brand Product etc. in the Review, I thought OEM would be fine and decided to replace the Mirror with Other Color.:Unpainted resin parts are SPEEDRA's Carbon parts, and the '24 model has been installed with no problem, so I installed the Mirror cover as well.
The one we purchased has a twill weave glossy finish in combination with other parts.
I have an impression that the type of parts that are put on the OEM Mirror is like a cover for the car dress-up parts, and I thought that I would not install it if there was any discomfort after the temporary fitting, but the material is carbon and thin, and you can see it around the moving part of the Mirror at the base. However, the material is thin and you can see it when you look around the Mirror's movable part at the base of the body.
The fitting also has some areas where the OEM Mirror is not fully hidden, but there is no particular sense of discomfort, so it was installed as is.
Installation is as simple as degreasing the OEM Mirror, covering it, and securing it with double-sided tape, but be careful not to break the cover, as you must spread the area around the Mirror's movable part while inserting it.
When I looked at the product, there was a hole at the bottom, so I wondered what it was? I wondered what it was because I saw a hole in the bottom of the product. I wondered what it was, and then I realized that OEM Mirror also has a hole for drainage?
The holes are not perfectly aligned, but they are in a functional position, so I think fitting will not be a problem.
The appearance is glossy, but it is not so strong, and you can appeal Carbon casually.
If you can't give up OEM visibility but still want to be Fashionable, this is for you.
View detail
Fits: HARLEY-DAVIDSON Universal
M8 FAT BOB was Exactly in Mirror.
It looked smaller than the OEM Product, so I was a little nervous when I saw it in the mail, but I was able to install it on my M8 FAT BOB without any problems. View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
large-volume saving
I found this product when I was looking for a good helmet holder for my motorcycle.
Now I can avoid Helmet from theft and other dangers. I like this product very much.
View detail
It was not sold at Home center.
[How is it used?
KTM Motorcycle's Right SideMirror is Opposite Thread ScrewSpec. just like Yamaha's. I decided to use the Tanax Off-set Holder 45 (product number:SA-25) to install the Mirror on my 390DUKE as an Other Brand Product, so I needed an M10 Reverse Screw bolt to install it.
Was the one you received as per Image?
It is very helpful that M10 reverse screw bolt is not sold at ordinary home centers.
Was the installation difficult?
To prevent the bolt from loosening, Screw lock fluid was used to install the bolt. Also, to prevent water from accumulating in the bolt's hexagonal hole and rusting, a TANA-X M10 Mirror Bolt Cap (product number:BCM-10) was installed as a waterproof measure.
How was your experience with it?
I installed Off-set Holder 45 with this Bolt, which improved Mirror visibility.
[Included Parts:were they on?
One Nylon washer is included but was not used this time.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Items to buy together:Screw lock fluid, M10 Mirror Bolt Cap
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
OEMHelmet holder relocated to Handlebar Post
The position of the OEMHelmet holder on the MT-09SP is very difficult to use, and it seems to get scratched by the footpeg and the dirt from the Chain lube, so I bought this Helmet holder to be able to lock it when placed on the Tank! I bought this Helmet holder so that I can lock it when I put it on the tank.
Since the Mirror mounting position would be easy to remove and the switch for the driver's recorder was already installed, we converted it to M10→M8 using the Washer (part number:78032) sold by the company and tightened it together with the Handlebar Post.
Our Handlebar Post is flat, so we were able to install it as is, but if it has an elaborately designed R like an OEM Post, you can install it by inserting an M8 collar that is taller than the protrusion of the R and a large M8 Washer between the Post and Bracket. I think it is possible.
I wanted to use the same key as the car body, so I thought I would need to modify the key cylinder, but it was the same shape as the OEM holder and could be transferred to the included bracket without modification.
The wire in the picture was purchased separately and installed, but it was quite stiff and difficult to use, so we replaced it later with a thin, easy-to-handle, compact one that came with the product.
The actual usability is a little cramped and I am accustomed to turning the key, but I can use it conveniently without having to turn the Dial without increasing the number of keys.
View detail
I am very happy with the Size as well Exactly!
Carbon parts are cool! View detail
100% satisfaction Mirror cover
I was worried about whether it would fit the shape of the Mirror, but it did EXACTLY that! 。 I recommend it for a change in atmosphere. View detail
Replacement of Mirror bolt from other manufacturer
[How is it used?
The Mirror bolt made by another company was cheap and seemed to rust easily (or rather, it was lightly rusted).
Was the one you received as per Image?
Polished than expected with Chrome plating.
How was your experience with it?
The most polished of all the surrounding parts, it even floats a little.
[Points to note]
nothing special
How did it compare to other products?
It may be expensive for a bolt, but it comes with a washer and is of good quality. Even if it is expensive, it is only a few tens or hundreds of yen, and I am satisfied with this product.
View detail
useful gadgets
The rearview mirror of my motorcycle is tanax AOS4. After using the rearview mirror for a year, I found that the screws fixing the rearview mirror have rusted, which is very unsightly. I saw this tanax original screw on webike, and immediately placed an order. Although it is a small accessory, it is very well made, and a nylon gasket is added to make the installation of the rearview mirror more stable. -------------------------------------------------- -------- My motorcycle's rearview mirror is TANAX AOS4. After using the rearview mirror for one year, I found that the screw of the fixed rearview mirror has been rusty, which is very unsightly. I saw this TANAX original screw on Webike, and immediately placed an order. Although it is a small accessory, the production is very good, and a nylon pad is added to make the rearview mirror more stable. Powered by Google Translator View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Mirror cover
Carbon Style Mirror cover.
It's just Carbon, but it looks good and I like it.
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
Used for pcx jf81
I installed it on the LeftMirror side of the pcx jf81. Easy to install 。 The product was also thick, chunky, and rigidly made. View detail
Nice Yellow color
I used it as a Headlight Film. I wanted to use a yellow color to improve visibility at night, so it was perfect. I was satisfied with the solid yellow color, and after about a year I got tired of it and put it back, but it came off cleanly without any adhesive residue, so I think the quality is good. View detail
just right
I bought this one because I was looking for one that could be installed securely.
The right side of the bolt is just right, but the left side is too long and interferes with the clutch holder.
The RAM MountBase was adjusted across the board.
I think it is highly recommended.
I bought two of them, and the other one is on my D Tracker 125.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
Large Person Custom
I like the casualness of it.
The chili fits Beauty pretty well, so it looks like Mirror with Full carbon.
Scrapes are quite noticeable, so you will need to check when you fall.
Also, as a matter of course, it's a PelePera, so it doesn't have any shock absorption capability.
I think it is a good idea to put it on when you change Cowl or Fender to Carbon.
View detail
cheap
It's very different with it. Good to look at.
But if you bend it too far, it will crack. Even if it cracks, you don't have to move the root of Mirror and you can just push it in so that you can't see it. Or rather, it is the price which is good if it replaces it.
View detail
Even better than they looked in the pictures!
The covers arrived and took about 10 seconds to mount. The finish is as good as it gets and really changes the look of the bike. These covers are a really nice modification to your bike 10 out of 10 View detail
"BMW C400X. on Left SideMirror.
Note:Neither BMW nor TANAX recommend the installation method described here. It is completely at your own risk, so please do not imitate it.
C400X. Is "Handlebar→OEMMirror Adapter→OEMMirror" This is the structure of the "OEMMirror Adapter. When "OEMMirror." Between the "Right SideM10 Standard Thread ScrewP1.25 "Left SideM10 Opposite Thread ScrewP1.25" This is the first time that the Company has been able to do so.
This time we have "Tanax Stingray mirror." So I installed it in this configuration.
C400X. In User "Tips for Mirror Customization. Camouflage may become
However, "C400X compatible parts Please understand that all of this is at your own risk, as it is not stated anywhere that
View detail
I was looking for them.
I was looking for a replacement part because the Rubber part had deteriorated. I was able to replace it at a reasonable price. The shipping was inexpensive and it arrived quickly. Thank you very much. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
A little inaccurate.
There is a little gap between the mirror and the normal mirror. View detail