Reviews
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
It is a natural assertion without feeling like it is a Cover (can be installed on the '24 model).
I was thinking of replacing the Mirror with Other Brand Product sooner or later, but when I got on the car and saw the visibility and the difficulty of adjustment of Other Brand Product etc. in the Review, I thought OEM would be fine and decided to replace the Mirror with Other Color.:Unpainted resin parts are SPEEDRA's Carbon parts, and the '24 model has been installed with no problem, so I installed the Mirror cover as well.
The one we purchased has a twill weave glossy finish in combination with other parts.
I have an impression that the type of parts that are put on the OEM Mirror is like a cover for the car dress-up parts, and I thought that I would not install it if there was any discomfort after the temporary fitting, but the material is carbon and thin, and you can see it around the moving part of the Mirror at the base. However, the material is thin and you can see it when you look around the Mirror's movable part at the base of the body.
The fitting also has some areas where the OEM Mirror is not fully hidden, but there is no particular sense of discomfort, so it was installed as is.
Installation is as simple as degreasing the OEM Mirror, covering it, and securing it with double-sided tape, but be careful not to break the cover, as you must spread the area around the Mirror's movable part while inserting it.
When I looked at the product, there was a hole at the bottom, so I wondered what it was? I wondered what it was because I saw a hole in the bottom of the product. I wondered what it was, and then I realized that OEM Mirror also has a hole for drainage?
The holes are not perfectly aligned, but they are in a functional position, so I think fitting will not be a problem.
The appearance is glossy, but it is not so strong, and you can appeal Carbon casually.
If you can't give up OEM visibility but still want to be Fashionable, this is for you.
View detail
100% satisfaction Mirror cover
I was worried about whether it would fit the shape of the Mirror, but it did EXACTLY that! 。 I recommend it for a change in atmosphere. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
The finish is beautiful, but the fit is a little tight.
I installed the same one on my 6R before and it fits almost perfectly.
This time it was a little too tight.
Mirror shape is the same, so is it an individual product difference?
The tatami finish is very good.
It's too bad it cost about 2000 yen more than it should have.
View detail
Fits: KAWASAKI NINJA650, KAWASAKI NINJA400, KAWASAKI ZX-6R, KAWASAKI NINJA250SL, KAWASAKI NINJA250, KAWASAKI NINJA1000
Extra Material:CarbonKey Holder is a delight!
I also bought a Ninja 250SL to hide the scratches on the Mirror part…
It's honestly insanely expensive ！！！！ … but the texture is good.
I am happy with the bonus Sticker and Key Holder. Other companies should take a lesson from you! LOL!
View detail
Too subtle.
It was only the front half of the Cover.
Carbon is also peLePera for the price.
Double-sided tape that has been attached from the beginning is also available.
About half of it was peeled off.
I waited 3 months and this was disappointing.
View detail
ZX-14R standard MirrorSpec.
Used on ZX-14R.
I tried to install it on Class Four EngineerRing's ZX-12R-like Mirror, but gave up because the size did not fit.
Short mirror had poor rearward visibility, so it is attached to the standard Mirror.
The size does not feel like it can cover everything, but the Level can be used without any problem.
Generally satisfied with the product.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
You might not even notice it unless you're told.
The carbon pattern was good and the precision of the parts was excellent.
It's casual, but compared to OEM, of course, it's still very different.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
Large Person Custom
I like the casualness of it.
The chili fits Beauty pretty well, so it looks like Mirror with Full carbon.
Scrapes are quite noticeable, so you will need to check when you fall.
Also, as a matter of course, it's a PelePera, so it doesn't have any shock absorption capability.
I think it is a good idea to put it on when you change Cowl or Fender to Carbon.
View detail
Even better than they looked in the pictures!
The covers arrived and took about 10 seconds to mount. The finish is as good as it gets and really changes the look of the bike. These covers are a really nice modification to your bike 10 out of 10 View detail
I hid the scars from the standing moss.
It looks good. I've been thinking it would be nice for a while, so I put it on this time to hide the damage from standing moss.
It's easy because it's fixed with Double-sided Tape, but I added more than just the included Tape because I was worried.
View detail
Speedra Mirror cover
The texture of Twill Carbon is good, but it is a little small compared to the Normal mirror, so it is a pity that the cover and the hat drills can be recognized. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
A little inaccurate.
There is a little gap between the mirror and the normal mirror. View detail
It is easy to install.Dress-up
Because the Mirror cover has been scratched by the standing moss, it is time to replace the whole Mirror But I bought it because it is cheaper than changing Mirror and can also do dress-up I did
What made you decide to buy?
It was easy to install and was cool with Twill Weave Carbon
How was your experience with it?
Carbon is conspicuously Cool!
Size and Exactly!
Was the installation difficult?
It is easy for anyone to install as it can be attached by double-sided tape It will not come off if you take off the oil when you install it
【Please tell me the installation point and hang】
As mentioned in the Instruction Manual, Double-sided If you peel off the peeling paper of Tape and apply it to the parts a little at a time, there is no problem It is recommended to peel off both ends of the peeling paper before installation because the peeling paper may be torn off in the middle I think
[Was the Instruction Manual easy to understand?
It's not a difficult task and it's normal
[Was there anything that disappointed you?
I was a little disappointed in the build-up
Do you have any wishes or improvements you would like to make for the Manufacturer?
I felt that the molding of the edges was a bit sweet A little more care and attention to detail would have satisfied me in terms of quality
View detail
man in charge
The other day, I noticed after I installed it on my motorcycle that the edge of the Carbon is on the spot [Color] There were a few areas where the Clear paint was uneven or hanging
There is a question as to whether the quality of the shipment is checked properly
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
Crisply change impressions
I like the shape of OEMMirror so I do not have to change the way to anything, and something with OEM Shape
I found out that there was a good one and I reached Colle.
Web! Ke says "Manufacturer missing item", but if you go directly to SSK's HP, it is normally in stock.
Although I thought that it was just a covering thing to put a little price on, but when you see the actual thickness,
There is also Well in terms of strength, quality is perfect.
With the instruction manual of Color, including SSK's Sticker and Carbon's Key Holder.
Since Double - sided Tape to be pasted already has been worn on the item, it will not take as long as 5 minutes to install.
I put it in while spreading the fundamental part when putting it on, but I was slightly afraid that it would not break
As expected it is thick, too strong.
OEM is a satin finish in Luster, but by installing this, casually without Luster
If you look closely, Real Carbon. Large I'm satisfied..
Recommendation as easy dress-up.
View detail