Reviews
A better throttle pipe for the GROM!
This is an improved throttle pipe from KITACO for the Honda MSX/GROM. It makes a slightly quicker throttle response (around 10%) which is ideal for the street use and not not as much as an racing quick action throttle. It's a good priced part and as usual from KITACO, a very good quality one. View detail
Fits: BMW S1000RR (K46), DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R
แอดมินให้บริการตอบคำถามได้ชัดเจน ที่สำคัญมีการจ่ายปลายทางด้วย ไม่ต้องวุ่นวายกับเรื่องสพก ส่งสินค้าถึงหน้าบ้านมั่นใจได้ของแท้แน่นอน View detail
Throttle pipe
I bought this to replace the Grip. I chose this one because it is inexpensive and a little bit High Solo. I haven't opened it to full throttle yet, but I think there are personal differences and preferences, but I also made the Throttle Wire with less play, which makes it easier to operate. View detail
Trendy & beautiful ACTIVE fast throttle holder Type-2 for use with TMR-MJN Carburetor
I was looking for a suitable fast throttle for my 1981 suzuki gsx1100e which i have already modified with a lot of performance parts. To complement the yoshimura TMR-MJN racing carburetors, i need to install the fast throttle. I have used ACTIVE products before and decided to try the ACTIVE aluminium fast throttle holder Type-2 (the slimmest profile) with the ACTIVE cables. it looks very beautiful and fully complement the overall look and feel of the modified GSX1100E. I have decided to go for the titanium gold colour, since the bike has a bit of gold colour and elements. after installation, the heavy feel of the yoshimura tmr-mjn carburetors feel much lighter, with better response. This is a highly recommended upgrade from normal throttle holder. the build quality, fit & finishes are also very good and value for money View detail
This is a winner Parts! This solves the problem! Recommended!
None of the other similar cheap parts worked….
I changed to this and was Large satisfied!
I wish I had not been stingy and had chosen this one from the beginning.
I highly recommend it.
View detail
VTR250High Solo
Used to convert VTR250 to High Solo.
It was a pontoon because it was a diversion that had many predecessors.
Throttle is a little heavier, but it does not bother me.
It is good because it eliminates the need to re-grip the Axel.
View detail
Used for AF24TACT modification
When AF24TACT is set to Disc brakeSpec. the thickness of the Master Cylinder Holder increases, so the NORMAL Throttle Holder will protrude from the Handlebar. This housing allows the Throttle to fit within the width of the LimitHandlebar. I could not find a precedent for this, so it was a bit of a long shot, but I was able to successfully install it. View detail
Handlebar area becomes more Parenthesis.
Installation requires removal of Accelerator Wire, which is a drawback View detail
It's easy.
I can replace it every time I change Grip. View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
ปลอกคันเร่ง kitaco ระยะจะสั่นกว่าของเดิมที่ติดรถผมสั่งมาใส่ monkey 125 โอเคเลยแนะนำครับราคาไม่สูงคุ้มค่าใครชอบแบบเดิม View detail
High Solo cheap
It's cheap
Purchased to convert to High Solo because OEM is hard on my wrists.
Easy to install
Once it's on, you can't see it from the outside, so the Custom feeling is Zero, but I rather like it that way!
View detail
I like the texture.
It is solidly made without being cheap!
The texture is quite nice!
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
To put on the Grip heater
Prepared for Grip heater.
Used to omit OEMThrottle processing.
I spent a lot of time adjusting the Throttle play, so I may not have shortened the result (laughs).
View detail
Installed on CB250R
I installed the one for Grom on my CB250R.
Being 10% High Solo, the amount of change is small, so it is not daunting or heavy.
It is easier because the amount of manipulation is reduced.
I have not tested it fully open, but when I straddle it and twist it, it seems to be Large sturdy without the Limit grip, although it is tough without re-gripping it if it is NORMAL.
View detail
Very Affordable Throttle Pipe when adding new grips for the Grom
About quality and texture: I am happy with the quality of super throttle pipe from Kitaco. Durable plastic housing with smooth surface which allows for easy installation of the new grips. About the feeling of use: With this product there is no need to attempt to reuse the Honda throttle pipe which makes the addition of new grips a breeze and with a shorter full throttle twist needed makes the Grom even more fun to ride. Products to buy together: Some new grips would also be desirable to purchase alongside the super throttle pipe as the Honda one will be extremely difficult to remove and they are much more comfortable grips available. Difficulty of installation: The process to install takes about one hour. The right bar end and the right side fairing need to be removed, the switch block needs to be opened and the cable tension needs to be loosened for the throttle pipe to be exchanged. Then reverse to steps to complete the install. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality made throttle pipe for a very affordable price and the best value when compared to the other brands. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The suitable grip length for the Grom is 120mm when you are looking for options. View detail
Fun.
I got a taste of it on the Big scooter, so this time I put it on the Gen II Scooter.
I usually don't do full openings all at once, but I still wanted to eliminate the grip changeover.
High Solo is a necessity for a vehicle as small as a motorized Scooter~.
It's a lot easier to ride.
In the "Situation" column, we have marked "Touring", but you can adapt it to your preference from city driving to circuits.
The cosmetics are honestly bad… expensive… Mr. ACTIVE….
I am happy with it because I can enjoy it as a tune and it is not a loss considering that I can fine tune the amount of winding and play as I want.
By the way, it is Simple and Cool.
It will not be Waterproof. Maintenance may be required after rain.
Throttle Cable is large and sturdy if …M10×P1.25, even if it is not a dedicated product.
View detail
Fits: Others , HONDA APE 50, HONDA GORILLA, HONDA MONKEY
ใช้ชีวิตง่ายขึ้นเยอะเลย View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
Good part
Put this on my msx125, feels much better, takes less rotation of the wrist to reach full throttle. Fitment is perfect and quality is as good as an oem part. View detail
Super Throttle Pipe from Kitaco
* About quality and texture, The throttle tube is made from a black plastic just like the Honda OEM one but with a different deign. * About the feeling of use, Definitaly a worthwhile product to install as I initally found the difference between the two quite noticable but over time it is now the new norm. Due to less rotation of the throttle required the power comes on faster and that is never a bad thing for a 125cc motorcycle. * Products to buy together, I would recommend also purchasing some new hand grips as the Honda OEM ones will be difficult to remove, Kijima have a great range here on Webike. * Difficulty of installation, Installation requires the tension to be released from the throttle cables, throttle housing opened up and bar end removed before you can remove and replace the throttle tube. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, There are a total of three brands offering throttle tubes but only the one from Kitaco offers the higher throttle rate and is the cheapest of all to purchase. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, I cannot see a reason why you would not add this product to your Grom. Use the product reviews to assist in making a decision on your purchase. View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
It is easier to turn Axel.
It was quick and easy to get to Top speed. View detail