Reviews
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
BALI shaving required
The Normal Throttle has a large pull allowance, so there were times when I had to re-grip it when running at full throttle, but this has not happened since switching to this product. However, this has not been the case since we switched to this product. Also, the Axel does not become too severe due to too high Solo, and the Throttle is now an easy-to-use Large Throttle.
When installing, there was a small BALI (less than 1mm) at the part that fits into the switch box, and when I turned the throttle, it jostled, so I had to shave the BALI and flatten it. It was not a large job, but it took a long time to install because I did not understand the cause at first. I recommend that you shave the BALI before installation.
View detail
There is BALI!
ALCAN handsHand bar with UniversalThrottle Wire Type1.
There was a BALI in the Holder and there were times when the Throttle Wire did not return.
I started to scrape around BALI with File.
Processing is considered necessary.
View detail
![Aluminum Throttle Holder [EVO2]](https://img.webike-cdn.net/catalogue/images/33257/1060356_1060358_TS.jpg)
YZF-R25 (installed in 2019)
The High Throttle Kit with 52Φ Bracket and Large Holder was originally installed on the vehicle I purchased, but the throttle was too heavy and tiring, so I changed it back to Normal, but decided to replace it with 42Φ and changed the Holder I decided to replace it with 42Φ and also changed Holder to Small.
The installation itself is easy, but since the Right SideSwitch box is also replaced at the same time, the tank must be removed. That was the strange part of the installation.
View detail
It is thin and GOOD.
I used it to convert XJR1300C to High Solo.
I wanted to make the Wire Stainless, so I bought it in bulk instead of buying it in Kit.
It is a split Type so It is easy to install.
The texture is good, and the Bolt is also taper-processed, showing attention to detail.
Be careful with Overtorque.
View detail
Race ish atmosphere UP!
Replaced the paint that had been on the handlebar because the paint was peeling off. View detail
Used for hot grip
I used it to put a Grip heater on my Axis Treat, and when I tried to order the OEM Throttle cone
The grip comes in one piece, so an external DAYTONA hot grip is used.
I think this product will be useful to put on.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA DAX, HONDA MONKEY, HONDA SUPER CUB110, HONDA CL50, HONDA DAX, HONDA DAX70, HONDA XR100MOTARD, HONDA XR50 MOTARD
pc20
I bought it together while installing pc20 Carburettor on my friend ape100. The response is good and there is no shortage of use. It is a highly recommended product for normal response. If you have a big Carburettor installed, please buy it! ------------------------------------------------------------ -------- I bought the PC20 carburetter on my friend APE100. Powered by Google Translator View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
There is a BALI and it needs to be cut down.
The BALI is on the opposite (lower) side of the Thailand coil position on the wire and I can feel it catching just before full throttle.
If you shave BALI, it becomes Smooth.
View detail
untitled
Personally, I didn't feel the effect of the 10% High Solo conversion.
It's only a personal issue, so it literally depends on the individual.
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
High Soloing
I changed the Grip and also Throttle.
Replaced. 20%Higher Solo
That's right, so I was wondering.
It's not that dramatic of a change.
Axel opening is a little easier.
The price is cheap, so I'm satisfied.
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
SUPERSlotPipe
The AxelSlot of CROSSCUB110 is not able to open the Axel fully without releasing the hand. View detail
I'm happy with the way it looks.
I'm glad I chose Active because of the look, performance and quality. It's thin, very slim and has a custom feel. The color choice was quite confusing, but I think the soothing black will look great on any motorcycle. View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA DAX, HONDA MONKEY, HONDA SUPER CUB110, HONDA CL50, HONDA DAX, HONDA DAX70, HONDA XR100MOTARD, HONDA XR50 MOTARD
APE 100
Used for APE 100discification
Available in Housing and Normal cab and Normal wire for APETypeD
The High Solo is suitable for touring in town.
Housing will be shaved or not shaved depending on whether you use the stop pin to Handlebar or not
If you attach the Grip too much to the Housing, it will not return properly.
View detail
Black is good if you don't want to emphasize the High Solo.
I currently have the same High SoloHolder in Silver, but I think the Black one is good if you want it to be less noticeable or the same color as the Switch Box. View detail
Recommendations for Grip replacement from Grom OEM
[How is it used?
You don't have to turn the Axel to feel it, you can turn it to full throttle.
Was the one you received as per Image?
Image
Was the installation difficult?
It was difficult to loosen the wire, so I watched YouTube and learned how to do it.
How was your experience with it?
It's the right thing to put on.
[Included Parts:were they on?
Included Parts:None
[Was there anything that disappointed you?
It's also inexpensive, which is good.
Other items that would be helpful
I want you to sell some types. I'd like to see more types that can be fully opened without turning the Axel.
View detail
It's SMART and looks good for maintenance
I needed a Throttle holder for radiphone purposes rather than High Solo purposes, so I installed an Active one.
The texture is good, and the Logo of Active is also Simple and Parenthesis good.
I had a hard time deciding what color to use, but as a result, I decided on Black.
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
Recommendation to light tune
I installed it on my MONKEY125.
It can be installed with no problem if you can do simple maintenance on the Level.
We replaced it when we replaced the Grip.
After installation, the wrists are easy on the wrist with High Soloization, as aimed.
The Throttle is especially effective because it is used constantly.
It's a Recommendation because the price is so reasonable!
View detail
If you're looking for texture, you're in luck
I used it for TW200
Handlebar is 22.2φ but it's a souvenir I bought at BALI
The accuracy is a bit more subtle
The texture is very nice.
Normally, the plastic Throttle would be in the Gold genus or something like that
I don't want to be a little cheesy! This may be good for people who are
I've combined it with the same Cable from GOODS and the NIBBI carburetor
The insertion point of the wire is a little stiff and not fully inserted
I put the Engine on and the Wire was hanging up a bit
The wire insertion point is cut out and the wire is inserted into the throttle first
It was easy to install
Maybe it's because the paint on the Handlebar was a bit of a Sugar Crystal finish
Does it feel a little heavy when you twist it, like aluminum or stainless steel? The smooth one
I think it's a good idea to use the Resistance Small measure
I think it fits the STREET type of Custom
The round, smooth design is also a nice touch
I wanted to use NIBBIOEM because it was TRACKER flavored
I didn't see it on LineUp
We were happy enough here as well
View detail
The price is reasonable, but the installation effect is satisfactory
There is no instruction manual and it may take some time to install You can do this Level if you look up the point in advance on the Net
In my case, I didn't have Parts cleaner to remove the Grip, so it took a lot of time and I did
Also, the size seemed to be a little different from the OEM and it didn't fit perfectly
I couldn't adjust the Grip part alone, so I finally finished adjusting the ThrottlePulley part
After the exchange, the need to regrip the Accelerator grip during the acceleration phase was reduced by about a third I'm glad I replaced it
View detail
![DUAL THROTTLE SLEEVE BLK [DS243110]](https://img.webike-cdn.net/catalogue/images/35311/DS243109_TS.jpg)
Fits: HARLEY-DAVIDSON Softail Deluxe EFI FLSTNI, HARLEY-DAVIDSON Screamin' Eagle Softail Springer FXSTSSE2, HARLEY-DAVIDSON 883 Custom XLC, HARLEY-DAVIDSON Screamin' Eagle Road King FLHRSE3, HARLEY-DAVIDSON 1200 Roadster XLCX, HARLEY-DAVIDSON 883 Low EFI XLL, HARLEY-DAVIDSON FXR 2, HARLEY-DAVIDSON Switchback FLD, HARLEY-DAVIDSON Electra Glide Police FLHTPI, HARLEY-DAVIDSON Sportster 1100 XLH, HARLEY-DAVIDSON 883 EFI XL, HARLEY-DAVIDSON Softail Slim FLS, HARLEY-DAVIDSON Softail Springer FXSTS, HARLEY-DAVIDSON Sportster 1200 XLH, HARLEY-DAVIDSON Electra Glide Classic EFI FLHTCI, HARLEY-DAVIDSON Forty-Eight Special XLXS, HARLEY-DAVIDSON 15th Anniversary Fat Boy FLSTF, HARLEY-DAVIDSON Softail Heritage FLST, HARLEY-DAVIDSON Softail Rocker FXCW, HARLEY-DAVIDSON Softail Deluxe FLSTN
Drag Specialties DUAL THROTTLE SLEEVE BLK
It's one of the things I need for my motorcycle. I needed some time in shipping, but I'm fully satisfied.Thank you for your attention in securing the inventory. I will continue to use it as a leaf. View detail