Reviews
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100RS, KAWASAKI GPZ900R, KAWASAKI W800, KAWASAKI W800STREET, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZRX, KAWASAKI ZRX-2
For installation of Grip heater on GPX750R.
The OEM throttle pipe with many ribs had to have the ribs cut off in order to install the grip heater, which is a large amount of work, so I was not sure if it would fit. The part numbers of the wire and switch box are the same, and only the Throttle pipe part number has changed, so I bought it assuming that if the part numbers of the wire and switch box are the same, it would physically arrive.
The result is satisfactory for pontoon use.
View detail
Fits: YAMAHA WR250F, YAMAHA YZ400F, YAMAHA YZ250F, SUZUKI 250SB, SUZUKI RM-Z450, SUZUKI RM-Z450, SUZUKI RM-Z250, KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KX450F, KAWASAKI KX250F, KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KLX450R, YAMAHA XT250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR450F, KAWASAKI D-TRACKER-X
very good
Off car is exercised while riding, so I feel that Aluminum Tube is Smooth because it is not deformed by force or deterioration! View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250
In preparation for
Quantity to add Bar End:Exchange in Set
The Bar End for the Close type used in the past is said to have been discontinued, and the Open endSpec. Bar End was purchased.
There is no particular change in the feel of the Teflon treatment, but it is a good idea to have multiple Teflon coated parts because they are easily damaged in the event of a fall or other accident.
The price is also relatively inexpensive.
View detail
Fits: SUZUKI RM-Z250, SUZUKI RM-Z450, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR450F
Used in CB250R
Used on CB250R.
Pipe is a little long, so cut about 3mm for a just fit.
The amount of Throttle manipulation was reduced by about 16%, making it easier to ride.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ65, YAMAHA YZ85, YAMAHA YZFR3, YAMAHA TTR250, YAMAHA TTR90E, YAMAHA TW200, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR450F, YAMAHA XT225, YAMAHA XT250, YAMAHA YZ125X, YAMAHA YZ250FX
The XG250 TRICKER has a slightly smaller take-up diameter than the OEM.
Purchased for installation of hand guard to be fixed to Bar End.
I installed it on my XG250 TRICKER and the take-up diameter is a little smaller than OEM.
I felt no discomfort when I rode it.
It was easy to open end for now, so that was helpful.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 50, HONDA APE 100, HONDA Live DIO Series, HONDA MONKEY, HONDA MONKEY, HONDA XR50 MOTARD, HONDA XR100MOTARD
CF POSH Flat Face Throttle Cone
I searched to replace the throttle grip of my genuine Ape 100 Type D, and unfortunately, only CF POSH products were in stock. Because it is an old model, after-parts are in short supply. I went down to the parking lot to replace the throttle grip and replaced the grip. This is a very easy replacement. You only need to loosen one screw bolt. As a user, there is little difference between the genuine product and CF POSH's 15% quick grip. -------------------------------------------------- -------- I searched to replace my genuine 100 type D throttle grip, and unfortunately there was only CF POSH product. It is an old model, so there is a lack of inventory of the after parts. I went down to the parking lot and replaced the grip to replace the throttle grip. Very easy replacement work. Only one screw bolt is solved. The 15%Quick Grip of the genuine product and the CF POSH is inadequate to feel the changed part as a user. Powered by Google Translator View detail
Fits: SUZUKI B-KING, SUZUKI BURGMAN400, SUZUKI BURGMAN650 , SUZUKI GLADIUS, SUZUKI GSR250, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX250R, SUZUKI HAYABUSA, SUZUKI KATANAGSX250R, SUZUKI SV650, SUZUKI V-STROM1000, SUZUKI V-STROM250, SUZUKI V-STROM650, SUZUKI V-STROM650XT
good quality and price
It makes install Kijima grip heater easier, i can install throttle grip without addhesive. I used Kijima GH10 before, it was good, but little bit play on the throttle due to the optional gear parts, but now with this tube there is no throttle play. I used several Kijima products until now, they supply aftermarket parts with the great quality and decent price. I think they are smart, do hard work and one of the best motorcycle aftermarket product company. View detail
Fits: HONDA CBR1000RA, HONDA VFR800FI, HONDA Forza300, HONDA SUPER CUBC125, HONDA VFR800A, HONDA VFR800, HONDA RVT1000R, HONDA NC750XD, HONDA Monkey125, HONDA FORZASi, HONDA NC750X, HONDA GROM, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, HONDA CBR300R, HONDA CBR600RA, HONDA CBR1000RR, HONDA CBR250R
Conscientious price, but quality is not so good
I purchased this product as a replacement for the OEM throttle pipe when replacing the grips on my CL250.
Before installation, we carefully checked the differences with the OEM Product and found the following three differences.
1. no Rib to prevent interference with Switch box
2. with BALI (due to different Material)
3.Pull Side shape is different
1. is Merit for the user. (Or rather, Honda's throttle pipe shape is special.)
When replacing the Grip with an OEM Throttle pipe, this Rib must be shaved off.
This Rib is to prevent the Grip from interfering with the Switch box and making it dull around the Grip.
Must not be pushed in too far when replacing Grip. *
Also, OEM throttle pipes have many warts on the grips to prevent them from turning.
If you replace it with a thin-walled external grips, the wart will be raised.
This product is grooved so that it can be used for external grips while serving as a detent.
I think 2. is due to individual differences, but sometimes BALI is still there.
Check it carefully before installation and handle it properly.
The inside of the Pipe was also covered with small amounts of Garbage, so a simple cleaning was performed before installation.
3. is a little tricky.
This may not be a problem for vehicles other than the CL250.
As shown in the photo, the Pull Side has a different shape, which increases the play of the Throttle.
= Open the Throttle and increase the pullback until the Engine reacts.
In the case of CL250, the switch box and throttle are in one piece.
It is necessary to remove the thailand core of the throttle body at the stage of removing the OEM throttle pipe.
If you are able to replace it, it would be possible to adjust the play of Wire.
The workload is a little more than for other types of vehicles.
(*)
Interference with the Switch box was compensated for with Yamaha's OEM parts WasherPlate.
I think it was RZ system OEM Parts, but I recommend stocking up on them so that there is less worry about what to do.
YamahaOEM Parts:Watsushiya, Plate]
90201-261L1
View detail
Fits: KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX150, KAWASAKI KLX250, KAWASAKI D tracker, SUZUKI RM-Z250, SUZUKI RM-Z450, SUZUKI RM-Z450, SUZUKI 250SB, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA WR250F, YAMAHA XT250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR450F, YAMAHA YZ450F
The construction looks good.
I think the construction is good. However, I feel that if the handlebar or throttle is deformed even slightly when bumped or tipped over, there is a possibility that it may not return to its original shape, so I think it is better to use Material:High Solo feel is only slightly different. View detail
ACTIVE teflon inner throttle pipe/grip in use with ACTIVE aluminium throttle holder
I installed this teflon inner pipe together with the ACTIVE aluminium throttle holder with the 2 fast throttle cables to operate the Yoshimura TMR-MJN40 racing carburetor. the size that i have chosen is the 40mm (which is the maximum for the ACTIVE throttle holder Type-2). It is a straight forward and easy installation, and after sucessful installation, the grip, the throttle response and operation of the TMR-MJN carburetor is much better and livelier. highly recommended upgrade even it is for normal carburetors. View detail
Fits: HONDA XR400 Motard, HONDA CRM250R, HONDA CRM250AR, HONDA XR230, KAWASAKI KLX250, KAWASAKI D tracker, SUZUKI 250SB, HONDA XLR250, KAWASAKI D-TRACKER-X, HONDA XR230MOTARD, HONDA XR650, HONDA XR250
Throttle now works better.
Apply a light coat of silicon spray and install.
No installation problems, no drilling required due to open end.
I'm not sure if it's because of the Teflon process, but it works much better.
⇒ It has been too bad so far.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Outside Grip (Pierced Type) Convenient for installation of
Outside Grip (Pierced Type) It took a little time to fit the Accelerator Wire thailand core when replacing the throttle cone. View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
Zita's Throttle
Movement is better than standard Throttle. View detail
Fits: HONDA CBR1000RA, HONDA VFR800FI, HONDA Forza300, HONDA SUPER CUBC125, HONDA VFR800A, HONDA VFR800, HONDA RVT1000R, HONDA NC750XD, HONDA Monkey125, HONDA FORZASi, HONDA NC750X, HONDA GROM, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, HONDA CBR300R, HONDA CBR600RA, HONDA CBR1000RR, HONDA CBR250R
smooth throttle
I bought Kijima throttle tube to replace the old on my Honda VFR800 VTEC 2003. I use the stock grip on Kijima throttle tube, is very strong, work very light and smooth throttle. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ65, YAMAHA YZ85, YAMAHA YZFR3, YAMAHA TTR250, YAMAHA TTR90E, YAMAHA TW200, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR450F, YAMAHA XT225, YAMAHA XT250, YAMAHA YZ125X, YAMAHA YZ250FX
Vmax1200.
I got this because it was cheaper than OEM. Nothing wrong with it. View detail
Fits: YAMAHA XT250X, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA Tricker, YAMAHA WR250X, YAMAHA WR250R, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KLR650, SUZUKI DRZ400E, SUZUKI DRZ400S, SUZUKI DRZ400SM, SUZUKI RMZ250, SUZUKI RMZ450, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA TW200
G2ergonomic WR250X
Very good throttle. Bought the fast throttle and it's really require small turn to have a blast. Reduce so much wrist movement. View detail
Genuine Honda Throttle Grip Tube for CBR600RR 2007
There was an issue with the throttle grip gfor this CBR. The throttle tube had a massive crack down it which also impeded with the ability to use it. Not a problem as I know Webike have these on their site so I could always order here, better yet, they even had these in stock. Happy days. I found the correct part pretty easily using the Honda schematics. Webike price was superb and better than I could source locally. With a few other parts my order was shipped with EMS and arrived in 5 days. When I unpacked the order, all the parts were individually wrapped so there was no damage to anything. The throttle grip is a really neat part and ready to be assembled so there is no messing around. I already had a brand new grip to add to this project so, this made my life a lot easier. The throttle tube is pretty tough and this is what you want froma throttle grip tube. The holes for the throttle cables is cleanly cut and they went in like butter. When all fitted, you can tell it is a new set up, it is smooth as silk to twist and also looks really cool. Another happy customer, thank you Webike. View detail
Fits: HONDA XR250R, HONDA XR600 R, HONDA XR650 L, HONDA XR650 R, HONDA XR400R(96-04)
Difficult to install.
Wire drums do not fit well, drums roll.
I went back to NORMAL because I was going to hurt Wire and get mad.
View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
Cl500
It fits perfectly. After searching here and there, I found out that it is the same product as the cl500 genuine throttle tube. The original one is white, but I bought it with ZETA Teflon. The Daytona handle grip and cable fit perfectly. They say it is more durable, but I think I need to use it for a longer time. I recommend it - -------------------------------------------------- ------- It's just right. After searching here and there, I found out that it is the same product as the CL500 genuine throttle tube, but it is a pure color. Powered by Google Translator View detail
Fits: KAWASAKI KLX125, KAWASAKI KLX150, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX250, KAWASAKI D tracker, SUZUKI 250SB, KAWASAKI D Tracker 125, KAWASAKI D-TRACKER-X
Compatible with DRC or zetaGrip
The one I purchased this time was Open end in Black color.Color:It is combined with Gray's DRCGrip.
Since the grip is 1cm shorter than the OEM KLX250es grip, the grip is a little on the Out side of the Handlebar, so I used it to modify the Position a little with the replacement of the zrta cx bar mx412. Ideally, the book's complaint about the Handlebar's width being a little too narrow has been resolved!
View detail