Reviews
Easy to install and looks completely different, so it's good.
The price may be a little high, but the quality is high, so I am very satisfied.
Since it was all black, I bought Green Light for VehicleLine tape to match the color of the car body and applied it.
The 3mm width is a little short, but it is easy to apply and I applied it along the underside, so it doesn't bother me that much.
I was rather thinking that this would be better since Tape was thicker and could not be applied properly if it was 5mm wide.
View detail
Parenthesis good!
Parenthesis is good. I replaced Mirror of Takekawa, but it is hard to see as I expected. [Color] It is not clear, so it may be difficult to distinguish fat cars and White Motorcycles… You have to be careful about tracking.
The Mirror and Bracket are operated by the ball, but it has a screw so that it can be re-tightened if it gets loose.
View detail
Easy to use
I ordered this Mirror because it was difficult to see the OEM Mirror, and after looking around on Youtube and other reviews, I found that this Mirror had a good reputation. As a result, I found that the Mirror has a wide range of installation options, including the ability to be offset to the back of the room, not to mention the ability to operate normally. View detail
I think it's a good product.
I think this product has a very good balance between production and price.
However, I think it is difficult to see the MirrorBody because of its small area.
This is a good choice for those who can separate the importance of production and design.
View detail
I wanted to make Mirror Refreshing.
I put it on my CRF250L and needed Spacer because the product is quite low! View detail
Foldable for convenient car loading.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
Since we often load and move our light van, we needed a mirror that folds up from the base, so we purchased the OR-II Mirror made by Takatsu, which we have always used for our off-road vehicles.
Did you receive the item as per the Image?
As I mentioned above, the product was very familiar to me as I continue to use it on the vehicles I use for mountain play and it was just like the Image.
Was it difficult to install?
If you simply want to install it, you can simply tighten it in, but to make it fold in the desired location, you must fine-tune the various nut-shaped parts at the base, which is less difficult but only slightly more troublesome.
How did you like it?
OR-II Mirror installation in my LITTLE CUB. Offfor VehicleMirror." I had a strong impression that this was a very strange feeling, but I got used to it in a few days.
Above all, the convenience of being able to fold it from the base. Too grateful." Now I like it so much that there is nothing else but this Mirror.
Was "Included Parts:" attached?
Only MirrorBody is not Common For Left/Right Side due to the special shape of the bracket.
Please use caution when purchasing.
Were there any disappointments?
I love the design, the Bracket shape, and the functionality of the product.
Other items that would be helpful
Point and hang of installation
It will be vehicle-matched, but after tightening the base, adjust it so that the folding notch folds to where the owner wants to fold it.
[Availability and clarity of the Instruction Manual
I believe there is a simple installation instruction manual on the back of the package, but I am not sure because I installed it without looking at it.
[Notes]
This product is designed for vehicles with a Mirror Holder of 8mm, so please be careful when purchasing.
The 8mm version does not have an Opposite Thread Screw compatible version. Please note that Yamaha and other recent vehicles have RightMirror with Opposite Thread Screws.
[ITEMS TO BUY TOGETHER
Motorized bicycles have no problem under the traffic law with only Mirror on the Right Side, but to reduce rearward vision, it is also necessary to use the Quantity:Pair (for Left and Right) Use it in the following manner.
[Opinions and requests to Manufacturer
Although the number of vehicles with 8mm Mirror Holder is decreasing, please continue to sell as much as possible for Kawasaki Off-road Motorcycle and SmallEngine Displacement Volume before 2000.
View detail
Foldable for convenient car loading.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
Since we often load and move our light van, we needed a mirror that folds up from the base, so we purchased the OR-II Mirror made by Takatsu, which we have always used for our off-road vehicles.
Did you receive the item as per the Image?
As I mentioned above, the product was very familiar to me as I continue to use it on the vehicles I use for mountain play and it was just like the Image.
Was it difficult to install?
If you simply want to install it, you can simply tighten it in, but to make it fold in the desired location, you must fine-tune the various nut-shaped parts at the base, which is less difficult but only slightly more troublesome.
How did you like it?
OR-II Mirror installation in my LITTLE CUB. Offfor VehicleMirror." I had a strong impression that this was a very strange feeling, but I got used to it in a few days.
Above all, the convenience of being able to fold it from the base. Too grateful." Now I like it so much that there is nothing else but this Mirror.
Was "Included Parts:" attached?
Only MirrorBody is not Common For Left/Right Side due to the special shape of the bracket.
Please use caution when purchasing.
Were there any disappointments?
I love the design, the Bracket shape, and the functionality of the product.
Other items that would be helpful
Point and hang of installation
It will be vehicle-matched, but after tightening the base, adjust it so that the folding notch folds to where the owner wants to fold it.
[Availability and clarity of the Instruction Manual
I believe there is a simple installation instruction manual on the back of the package, but I am not sure because I installed it without looking at it.
[Notes]
This product is designed for vehicles with a Mirror Holder of 8mm, so please be careful when purchasing.
The 8mm version does not have an Opposite Thread Screw compatible version. Please note that Yamaha and other recent vehicles have RightMirror with Opposite Thread Screws.
[ITEMS TO BUY TOGETHER
Motorized bicycles have no problem under the traffic law with only Mirror on the Right Side, but to reduce rearward vision, it is also necessary to use the Quantity:Pair (for Left and Right) Use it in the following manner.
[Opinions and requests to Manufacturer
Although the number of vehicles with 8mm Mirror Holder is decreasing, please continue to sell as much as possible for Kawasaki Off-road Motorcycle and SmallEngine Displacement Volume before 2000.
View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA MT-10SP, YAMAHA MT-10, YAMAHA MT-09SR, YAMAHA MT-09, YAMAHA MT-07, SUZUKI ST250E, SUZUKI KATANA, SUZUKI GSX-S750, SUZUKI GSX-S1000, SUZUKI GSR250, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Z650, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI Z125PRO, HUSQVARNA Vittopilen 701
Yes.
The OEM was replaced with something like ”arinko”.
This is the only bar end mirror that has a range of motion inside and outside 。 One choice!
Mounted face down. 。 Therefore, it is a little difficult to see.
Although the position is somewhat less visible than the OEM, there is no substitute for the feeling of openness with nothing in front of you.
Ball joints will not move when coated with liquid rubber.
The screws of the restrainer will not loosen due to vibration if they are handled with Screw Lock.
The supplied in-bar mounting parts are not used. The original OEMRubber parts are the most well-fixed.
The car passed inspection without any problems.
View detail
Easy to see and Parenthesis good
Installation was not difficult, and the Instruction Manual was included. However, I would like to use another quantity of Washer to tighten it securely.:I think I need 1 Set, it's easier to read than OEM and Parenthesis is better! View detail
stage 6 mirrors
item received as described and well packed. received on time as well. will order more in the future stage6 mirrors are one of the most soughts mirror for small CC scooters such as namx xmax aerox... View detail
textured good feeling
I am satisfied with the texture and design. The adjustment can be set in detail. It would be even better if the Mirror section could be moved up and down, even if only a little. View detail
The product is as expected.
I am satisfied with the quality and design, and I think it is worth the price, especially with features such as the Turner. [Color] If you can Clear, I have no complaints. View detail
Fits: HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Dio ZX (DIO), HONDA Dio SR (DIO), HONDA Dio SR (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Ape(100) (APE), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), SUZUKI Lets4G (LETS Forge)
Used for TDR80
I was prepared for vibration because it is a single cylinder, but it is well made and the vibration did not make it difficult to see the rear.
The angle is easy to adjust.
The design is Orthodox, so it will fit any Motorcycle.
View detail
Blue Mirror is cool.
I really like the Blue Mirror.
The Mirror does not blur while driving and is comfortable.
I think Tanax is a reliable Brand.
They answered my inquiries in a friendly and courteous manner.
View detail
Blue color is eye-catching
This is a replacement for REBEL250 from OEM Product.
I tried to remove and attach OEMMirror, but it would not fit.
Manufacturer was instructed to remove the Mirror mounting base (silver color) attached to the telephone handlebar on the spot. It was safely attached.
The gap between the Brake fluidCase and the RightSide Mirror Base is a little small, making it difficult to turn the 17mm Spanner when installing the RightSide Mirror Base.
I am also satisfied with no blurring or loosening while driving. No loosening etc. I am satisfied.
It turned out very cool.
View detail
กระจกมองข้างทรงกลมพร้อมขาหนีบเพิ่มลูกเล่นใหม่ให้แก่ตัวรถจักรยานยนต์ของคุณ รายละเอียดสินค้ามีความเงาและชุบโครเมี่ยมที่ดี View detail
Lightest weight, highest quality Mirror.
[How is it used?
I was looking for a product that would meet my needs in terms of appearance, performance and stability, and I knew that Magical racing was the one I was looking for.
Was the one you received as per Image?
The image is just as it should be, high quality, and so lightweight that one wonders how Mirror can be so light. It is so lightweight that you may wonder if Mirror is really that light. Moreover, it is well made, so there is no fear of it being damaged while driving.
Was the installation difficult?
This is a common installation method, so there is no problem. However, the combination with Arm and position adjustment depends on the Motorcycle.
How was your experience with it?
Once you use Mirror, you will not be able to use any other company's Mirror. It looks good and is lightweight, but above all, Mirror does not shake at all, no matter what the speed is. Even when driving at full throttle in a circuit, the rearward vision is still there.
[Included Parts:were they on?
Everything is provided, but I purchased the Short arm separately. The length can be adjusted by replacing the Attachment.
[Was there anything that disappointed you?
Gold amount is … however, I think it is reasonable considering the quality.
View detail
enduro doubletake mirror
Thank you so much webike. This is my 4th time to purchase and you always amaze me with your outstanding service and amazing products. The doubletake mirror has a robust build and is stable even on high speed. It is so easy to install (no tools needed) More power and im looking forward for my next purchase View detail
Fits: HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service)
Fits old Honda Motorcycle
Purchased for use in Honda's Initial Model R&P. In recent years, motorcycle parts, both Bracket and Mirror, are short and compact.
It was difficult to find something that was easy to see, so I kept looking and finally found it. I am now using it with satisfaction.
View detail
The viewpoint to Mirror is farther away, which reduces eye movement and makes it easier to check the rearward direction.
[How is it used?
Mirror problem that I personally had been struggling with right after I bought my SV650X.
Perhaps it is because I am not accustomed to riding a naked type motorcycle with separate handlebars, but it is difficult for me to see backward with Mirror.
I had owned a good number of Separate handle type motorcycles, but all of them were full cowl type, so the Mirror was cowl mounted far forward of the handlebar. The SV650X, however, has a long bracket from the handlebar mirror holder to the front of the handlebar, and the mirror is mounted on the handlebar in a cowl mount far forward of the handlebar.:Pair (for Left and Right) Since it is on the Close to the point of view." + Mirror bracket section is long. Quantity for Mirror:Pair (for Left and Right) The distance between the two points makes it difficult to check the rearward direction only by eye movement.
I am a timid person with poor driving skills, so I had to check the back of the car more often, so even if I did a little work each time, the fatigue would accumulate over the distance and time and become a stress.
Was the one you received as per Image?
In the midst of all this, I found Napoleon On's "BAREN T.T. MirrorMirrorEX", the rise of the bracket from the front of the Mirror Holder and the adjustable angle of the bracket were just as I imagined.
Was the installation difficult?
Simply remove the existing Mirror and install this product; rather, installation is easier than with Normal mirror.
Just set it to the Position of your choice, and then use the Quantity:Pair (for Left and Right) may be somewhat cumbersome to adjust to the same opening.
How was your experience with it?
The mirror's mirror surface is more forward than that of the Normal mirror, so the viewpoint movement is reduced to a Large width, making rearward visibility easier.
[Included Parts:were they on?
The MirrorBody contains two Bolts for mounting to the Holder, one Opposite Thread Screw and one Pure Screw.
[Was there anything that disappointed you?
Disappointing, I would say, personally. I would like to have a VERSION with a longer bracket by about 10mm. Is it like that?
Other items that would be helpful
Point and hang of installation
No difficult task, but Quantity:Pair (for Left and Right) Mirror of Quantity at the same angle with the same opening.:Wouldn't it be better to have it set to Parenthesis in terms of Balance?
[Availability and clarity of the Instruction Manual
There are simple instructions on the back of the Package, but there is only one way to attach it, so there is no need to be confused.
[Notes]
If not firmly secured, they may begin to loosen due to vibration or wind pressure, causing you to panic while driving.
After installation & adjustment, be sure to check the tightness (but be careful not to over-tighten).
[ITEMS TO BUY TOGETHER
Nothing in particular. It may be possible to replace the parts of interest around the Handlebar with parts you like while replacing Mirror.
[Opinions and requests to Manufacturer
I have been relying on you for a long time to line up Mirror of various designs, and I hope that you will continue to maintain the lineup.
View detail