【TAKATSU】OR-II Review
Foldable for convenient car loading.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
Since we often load and move our light van, we needed a mirror that folds up from the base, so we purchased the OR-II Mirror made by Takatsu, which we have always used for our off-road vehicles.
Did you receive the item as per the Image?
As I mentioned above, the product was very familiar to me as I continue to use it on the vehicles I use for mountain play and it was just like the Image.
Was it difficult to install?
If you simply want to install it, you can simply tighten it in, but to make it fold in the desired location, you must fine-tune the various nut-shaped parts at the base, which is less difficult but only slightly more troublesome.
How did you like it?
OR-II Mirror installation in my LITTLE CUB. Offfor VehicleMirror." I had a strong impression that this was a very strange feeling, but I got used to it in a few days.
Above all, the convenience of being able to fold it from the base. Too grateful." Now I like it so much that there is nothing else but this Mirror.
Was "Included Parts:" attached?
Only MirrorBody is not Common For Left/Right Side due to the special shape of the bracket.
Please use caution when purchasing.
Were there any disappointments?
I love the design, the Bracket shape, and the functionality of the product.
Other items that would be helpful
Point and hang of installation
It will be vehicle-matched, but after tightening the base, adjust it so that the folding notch folds to where the owner wants to fold it.
[Availability and clarity of the Instruction Manual
I believe there is a simple installation instruction manual on the back of the package, but I am not sure because I installed it without looking at it.
[Notes]
This product is designed for vehicles with a Mirror Holder of 8mm, so please be careful when purchasing.
The 8mm version does not have an Opposite Thread Screw compatible version. Please note that Yamaha and other recent vehicles have RightMirror with Opposite Thread Screws.
[ITEMS TO BUY TOGETHER
Motorized bicycles have no problem under the traffic law with only Mirror on the Right Side, but to reduce rearward vision, it is also necessary to use the Quantity:Pair (for Left and Right) Use it in the following manner.
[Opinions and requests to Manufacturer
Although the number of vehicles with 8mm Mirror Holder is decreasing, please continue to sell as much as possible for Kawasaki Off-road Motorcycle and SmallEngine Displacement Volume before 2000.
Responses
Other reviews
Well, okay.
Used for square-grained CUB No. 90Custom
We wanted something that would not extend too far beyond the width of the handlebar, but still allow for fine adjustment front to back.
In the CUB, the handlebar switches and Mirror are integrated into one unit, so if the Brake lever position is set to the upper side, the Mirror will be tilted too far toward the front. Am I the only one who thinks that the lever of the CUB is too far downward, and that Mr. Honda should do something about it?
Thanks to this, Mirror fits in a good position.
The Mirror diameter is a little small, but I didn't mind.
Installation is a bit of a hassle with all the Nut.
Let's do our best while looking at the instruction manual.
For the time being, a rubber cover is attached, but the hole and the arm are not very tightly sealed, so the waterproof property may not be good.
View detail
Foldable for convenient car loading.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
Since we often load and move our light van, we needed a mirror that folds up from the base, so we purchased the OR-II Mirror made by Takatsu, which we have always used for our off-road vehicles.
Did you receive the item as per the Image?
As I mentioned above, the product was very familiar to me as I continue to use it on the vehicles I use for mountain play and it was just like the Image.
Was it difficult to install?
If you simply want to install it, you can simply tighten it in, but to make it fold in the desired location, you must fine-tune the various nut-shaped parts at the base, which is less difficult but only slightly more troublesome.
How did you like it?
OR-II Mirror installation in my LITTLE CUB. Offfor VehicleMirror." I had a strong impression that this was a very strange feeling, but I got used to it in a few days.
Above all, the convenience of being able to fold it from the base. Too grateful." Now I like it so much that there is nothing else but this Mirror.
Was "Included Parts:" attached?
Only MirrorBody is not Common For Left/Right Side due to the special shape of the bracket.
Please use caution when purchasing.
Were there any disappointments?
I love the design, the Bracket shape, and the functionality of the product.
Other items that would be helpful
Point and hang of installation
It will be vehicle-matched, but after tightening the base, adjust it so that the folding notch folds to where the owner wants to fold it.
[Availability and clarity of the Instruction Manual
I believe there is a simple installation instruction manual on the back of the package, but I am not sure because I installed it without looking at it.
[Notes]
This product is designed for vehicles with a Mirror Holder of 8mm, so please be careful when purchasing.
The 8mm version does not have an Opposite Thread Screw compatible version. Please note that Yamaha and other recent vehicles have RightMirror with Opposite Thread Screws.
[ITEMS TO BUY TOGETHER
Motorized bicycles have no problem under the traffic law with only Mirror on the Right Side, but to reduce rearward vision, it is also necessary to use the Quantity:Pair (for Left and Right) Use it in the following manner.
[Opinions and requests to Manufacturer
Although the number of vehicles with 8mm Mirror Holder is decreasing, please continue to sell as much as possible for Kawasaki Off-road Motorcycle and SmallEngine Displacement Volume before 2000.
View detail
Off-road look and feel
First of all, the folding and Mirror fixing parts had to be retightened firmly before use, or else it would be lubricated. In particular, the Mirror fixing must be tightened very firmly, or it would move in the wind while running. The folding section needs to be tightened properly after applying grease, and the degree of tightening is rather delicate, so at first I had to retighten it several times before I found the right degree.
Mirror is easy to see without blurring due to vibration, but folding is positioned and a little troublesome to adjust to it...Mirror Bracket, which is Offset to prevent arms from hitting in Standing, has a strange curved design, partly because of this, The Mirror Bracket has an odd curved design, which is also the reason why it folds up so easily. "Heh I think that the "U" shape is a little bit bad for parenthesis....
Folding is somewhat troublesome, so there may be more situations where I end up running without folding Mirror................;
View detail
Please continue to sell for a long time.
[How is it used?
When using the KDX220SR for mountain play The Mirror is resistant to damage in the event of a fall. I purchased this product to change to
Was the one you received as per Image?
I have been using Mirror for many years and the product is as Image.
Was the installation difficult?
It's a bit of a pain to adjust the folded position to your liking, but once you get it right, the rest is easy, so it's a process that can't be helped.
How was your experience with it?
In my case, after purchasing and using other companies' products, I settled on this product in consideration of the blur caused by rearward confirmation and vibration, etc. I have been using it for many years in various types of cars, so in a sense, I am very happy with it. "Reliable feeling" There are things like.
If you adjust the folding position as described above, you can easily fold it to your desired position anytime you want.
[Included Parts:were they on?
It is a product that integrates things related to Mirror.
Quantity:Pair (for Left and Right) Sold separately. "for Right Side." "for Left Side." This is an Exclusive Design, so make no mistake when purchasing.
[Was there anything that disappointed you?
I have absolutely no complaints about the product itself.
0Other items that may be useful include
Point and hang of installation
Adjust the notch for folding to the Position you want to collapse as written above.
[Availability and clarity of the Instruction Manual
There is something written on the back of the Package, but I have never read it.
[Notes]
This is not Communal to Left/RightDesign, so make sure you get it right when you buy.
[ITEMS TO BUY TOGETHER
Quantity:Pair (for Left and Right) It's better to buy it at...
[Opinions and requests to Manufacturer
I ordered it from Webike and I got the For Right Side. I don't know when it's coming in. This was the case.
I was able to purchase it at a Motorcycle supply store in the prefecture. "Stock clearance." Are they going to stop manufacturing?
View detail
It's a very easy to use Mirror if you think about it Total.
[How is it used?
I bought this with my new purchase of a Mountain Games Motorcycle.
How was your experience with it?
I thought that I would transplant the Mirror which was installed in the vehicle which was sold along with the replacement of the vehicle, but... because the Mirror Holder of the vehicle which was introduced this time was 8mm Spec. I have to buy again.
How did it compare to other products?
There is also a Mirror that folds up easier than this product, and it is also made by Takatsu. "Trial mirror." There are also Compact Mirrors, such as "Vibration countermeasures" "Easy to fold." "No interference when standing." etc.Total makes this product the best for me.
[Points to note]
During installation, the Mirror root "The notch." to the direction you want to fold the Quantity:You have to set it, which is quite a tedious task.
The next step is to adjust the Mirror Bracket so that it moves with the hardness that you like.
0Other items that may be useful include
【Included Parts:presence or absence】.
This is only one bottle as per the Package in the image.
Depending on the vehicle, the Right Side Mirror may have a Normal Thread Screw or an Opposite Thread Screw, so be sure to check your vehicle before purchasing.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
The number of Dual Par Pass cars made by Japanese manufacturers is decreasing, but please keep making them as long as possible.
View detail