Reviews
very good product
In the original C125 condition, you can't really see the back.
You can change the mirror, but the original mirror itself is great, so I bought an extension kit.
In the end, I am very satisfied.
The rear view is much wider and you can see better.
The product itself was sturdy and the packaging was good ---------------------------------------- ------------------ In the original C125 condition, you can't really see the back. You can change the mirror, but the original mirror itself is great, so I bought an extension kit. In the end, I am very satisfied. The rear view is much wider and you can see better. The product itself was sturdy and the packaging was good. Powered by Google Translator
View detail
Even 30mm was enough.
Normal mirror was installed because it was difficult to see the reflection of the arms.
I don't have the 45mm in stock, I thought I could order the 30.
Checking the projection, I could see well behind me, which was an improvement even with Offset 30mm.
View detail
easy to read
I installed the mirror on my MONKEY125 because it was hard to see. The rearward view is not only easier but also extended to the front, so I can use it very comfortably with less eye movement. View detail
Purchased for installation of Kellerman Barrett Ato
[How is it used?
We put a Stainless Steel Gold fold and Spacer on the +Screw of the Switch box, and then attached a M5 10mm OD Pipe nut to the bottom of the box with an M5 ultra-low cap bolt, and then attached this Kellerman Universal Bracket.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is easy because all we had to do was loosen the screws, fix the bracket to the pipe nut, and tighten the screws. It was firmly fixed.
How was your experience with it?
I have not yet purchased and installed the Barrett Ato, so I can't make an overall judgment, but I am satisfied that I was able to secure the Bracket as shown in the Image. I would like to purchase Barrett Ato as soon as I have the budget and am ready to do so.
[Included Parts:were they on?
Nothing was missing regarding Included Parts:, such as M6Spacer or Screws.
[Was there anything that disappointed you?
I am dissatisfied with the price. I think it is a little too expensive, but it is an overseas Manufacture, so it can't be helped.
View detail
TANAX OFFSET HOLDER 45
Thank you so much for the quality and delivery. After the release of the new Monkey 125, it seems that this part is the part that can be used to counteract the extreme vulnerability related to the side mirror visibility. Due to the recommendation from other Monkey users, I will purchase it without hesitation and use it well. -------------------------------------------------- -------- Thank you so much for the quality and delivery. After the release of the new Monkey 125, it seems that this part is the part that can be used to counteract the extreme vulnerability related to the view of the side mirror. Due to the recommendation from other Monkey users, I will purchase it without hesitation and use it well. Powered by Google Translator View detail
Fits: YAMAHA TZR50, KAWASAKI ZEPHYR750, HONDA NSR50, HONDA NS-1, HONDA CB400SF, KAWASAKI ZEPHYR400, YAMAHA XJR400, YAMAHA RZ50, HONDA NSR250
One point custom
Purchased for One point custom color insert on the body of the car.
Each color is available so you can match it to your taste.
Clutch adjustment is easier because the rotating part is easier to turn.
View detail
Buy 2, guys
You're purchasing a set of ONE unit. I made a mistake buying only one thinking it comes as a set of 2 units. Don't make the same mistake as I did. As for the product itself, no complaints - it's sturdy and good-looking. View detail
Best product!
I ride a current Z400.
Before installing this product, I could not even tell if there was a vehicle behind me, but after installation, I can see it differently and I am satisfied with Large.
If the price were a little lower, it would be a perfect score.
View detail
relief from a worry
I bought this for my CT125 because the LeftMirror is in a strange place and it was hard to see the back of the car.
I am happy with this Parts and it is much easier to see.
I was torn between 30mm and 45mm, but the 45mm is just right.
View detail
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
Gold's Clutch adjusterZ125pro
The Bolt is a little longer than OEM, but it came on with no problem at all. If you are considering this, please do so at your own risk.
[How is it used? Town ride
Was the one you received as per Image? Yes.
Was the installation difficult? Easy if you can lubricate the Clutch Wire
How was your experience with it? I think it has quite a dress-up effect.
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Other items that would be helpful
Just work together when lubricating the installation points and hang/clutch wires.
Availability and clarity of Instruction Manual/A piece of paper is included, but it is a reminder to have it properly installed by a skilled contractor. This is fine, since the person who intends to install such a component does not need instructions for installation or use.
Notes/Nothing in particular.
Items to buy together/None in particular
Opinions and requests for Manufacturer/Good enough product.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Clamp set for Attachment Cross Bar
This product is listed in Honda's OEMAttachmentCatalogue and is installed in combination with the Shaft for AttachmentCross Bar.
Current NC750X (from 2021) I purchased this product because the OEM Knuckle guard is attached to the Handlebar Brace, and I thought it would not be possible to install the Handlebar Brace with a regular Handlebar Brace Clamp because of the Cable clip in the mounting position. This product has a thin wall so the cable clip can be easily fended off and installed.
Since the standard outer diameter of 22.2mm can be used for installation, it can be used for other purposes in addition to handlebars, depending on the ingenuity of the user.
I wish they were the same color because the Bolt and Washer are Silver and the color looks floaty lol.
View detail
Fits: HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP
Shaft for Attachment Cross Bar
This product is listed in Honda's OEMAttachmentCatalogue and is to be installed in combination with the AttachmentCross Bar Clamp set.
The outer diameter is 22.2mm, the same as a standard handlebar, so attachments can be attached to the handlebar.
Current NC750X (from 2021) This product could be installed with a pre-2021 OEMOption Knuckle guard that does not have an Option setting on the
I do not think it will play the same role as the Handlebar Brace, but it will serve well enough to attach other attachments.
View detail
This curved Bracket is exquisite.
[How is it used?
Purchased this product for ease of use when installing a DAYTONA external power supply extraction Socket on my multi-purpose SEROW250.
I was looking for a short type mount bar, even if it looks a little messy, but I decided it would be better to use it easily. I was looking for a short type mount bar when I found it in Webike's product introduction section.
How was your experience with it?
I don't like the mess around the Handlebar, but when I used it, I found the USB Power Port easy to use and the Large Change convenient, and I understood why so many Mount bars are sold... (Thoughts of a middle-aged man who is about to be overtaken by the times).
The product was exactly as shown in the Image, with the smallest possible Refreshing Type.
How did it compare to other products?
This is a common Type used to bite into Mirror Holder.
The curved Mount Bar Connection Bracket is fixed to the L-shaped Bracket that is fixed to the Mirror Holder, and can be moved back and forth to allow the Mount Bar to be positioned at a convenient location for the user.:Can be set.
This curved connection bracket is exquisite and allows for a lower quantity position than is possible with a straight design bracket.:I am impressed with the wonderful Ideas because I can Set.
[Points to note]
By Mirror Holder For 8mm For 10mm Check the screw size of the Mirror of the vehicle you wish to install and be careful not to purchase the wrong one.
Manufacturer-wise. For LeftMirror The curved Bracket is not impossible to install on the Right Mirror (although the curved Bracket will be warped in the opposite direction).
Quantity to Position easy to use for Spec. cars.:Once set, please tighten and secure each part firmly, otherwise you will be in a panic if it loosens while driving... (this is my experience)
Other items that would be helpful
The deciding factor in the purchase
As mentioned above, the short type mount bar and the exquisitely curved bracket are the deciding factors.
【Included Parts:presence or absence】.
L-shaped Bracket for connecting Mount Bar Body and Mirror Holder, Washer and Nut are included.
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you purchase the products you want to install at the same time, such as a power supply outlet, Smartphone Holder, Drink Holder, Camera Mounting Holders, etc., you can proceed with the work at a stretch.
Opinions and requests to Manufacturer.
Ideas products are different from other car products.
From now on. Good products at affordable prices. Thank you in advance.
View detail
TANAX OFFSET HOLDER 45
125 years old, 125 years old, 125 years old.
I want to know more about this.
I bought the genuine Monkey 125 side mirror because I couldn't see the rear clearly.
After installing the offset holder, the mirror viewing angle will be good, allowing you to see what's behind you and drive safely. -------------------------------------------------- -------- The side mirror of the genuine Monkey 125 was purchased because it could not show the rear. After installing the offset holder, the mirror viewing angle is good, so you can show the rear so you can drive safely Powered by Google Translator
View detail
Instead of a simple crucon (put it on the bottom side to restrictor?)
There is also a Throttle locker that is held in place with the palm of the hand, but this one can hold the Throttle in place, which considerably reduces the burden when running at a constant speed.
Since the throttle does not return simply by releasing the hand, it can be dangerous without a certain amount of skill, but if the closing motion is made consciously, the degree of opening can be adjusted in increments of about 2 to 3 km/h.
When attached to the lower side, the Throttle opening is (can be) restricted, so it may be used in place of Restrictor.
(useful for breaking in, etc.?)
If the grips are thicker, the attached silicon band will be large and sturdy without it, but since it rubs against the grips, it is recommended to wear it to reduce abrasion.
View detail
Back MirrorImproved rearward visibility
The rearward visibility of the Grom OEM Mirror was poor (about 1/3 of the arm was reflected) and I had to retract my arm every time I checked the rearward view.
When we tried to install it as it was, it interfered with the Throttle Wire, so we had to loosen the nut that secures the Wire and adjust the angle.
The installation has improved the reflection of the arms considerably, though not completely.
View detail
Buy.
If you fall often, be sure to put it on!
All the Motorcycles in my house have them.
I've never broken Clutch or Brake.
View detail
Fits: Others , HONDA MONKEY125, HONDA CL250, YAMAHA XSR125
The clutch cable looks nice.
The original version of Monkey is covered with a cover, so it is plain. I searched for parts to give it a point. I was looking for a color similar to the mesh hose connection part, and I happened to find a red-blue Takegawa cable adjuster. I am very happy because it matches well with the mesh hose and gives the plain clutch cable a more stylish look. -------------------------------------------------- -------- Monkey's genuine is covered with cover, so it's flat. I searched the parts to give points. I found a color similar to the mash hose connection, and I found Red Blue's Takega and Cable Eraster. Powered by Google Translator View detail
I appreciate the Large change to get Repair.
Some Zita products have soft screws that are easy to lick, but since it is difficult to replace the Bolt with a home center or similar product, I am thankful that a large replacement product is available. View detail
It is a product that fits very naturally.
Since it hasn't been installed yet, I'll replace it with a photo of a club member. It matches as if it was originally installed by the manufacturer. Both build quality and materials are excellent. I first heard from a club member who installed it that rust does not form even without the bolt cap. It is heavy and feels solid. Very satisfied.
-------------------------------------------------- -------- It is still installed, so it is replaced by a member of the club members. It suits the manufacturer as if it was originally mounted. Both builds and materials are great. First of all, I listened to the members of the club. The weight is too heavy, so I feel hard. Very satisfactory. Powered by Google Translator
View detail