Reviews
Both height and width are just right!
[How is it used? The Handlebar I was using before was too low.
Was the one you received as per Image? Position is now easier as recommended by Shop.
Was the installation difficult? Drilling was required for the Mirror Holder, so a Drill is needed for installation.
How was your experience with it? Long distances are now easier.
View detail
It was possible to install on VSTROM250SX.
It was possible to install on VSTROM250SX. View detail
Great quality!
Great handlebars in perfect quality. They look great on the bike.In terms of size, this type most closely matches the Pro Taper Bradshaw type of handlebars. A great choice for the YZ 250. View detail
Note:5 stars for Handlebar and Touring in the city
As stated in the title, the feeling of operation, push/pull, and position during city driving and touring are 5 stars. I have heard that other companies' handlebars are much narrower and the position is better, but the feeling of control is not so good, and it is not possible to load the front well, etc. However, there is no problem at all with this product for city riding and touring, I have also tried this product with the STD Handlebar made of aluminum to make it lighter and the Handlebar slightly narrower (which is quite large and reduces the stress on the shoulders and wrists considerably). It is easy to use even for Gymkhana. The angle of the handlebar is shown in the picture below, but when the handlebar is fully locked, the bottom of the RightSwitch is level with the slope of the body.
From here, I will show Minus a little personally.
It is great for city touring and slow turning Gymkhana, though,
In the case of Curve and Circuit, the aperture of the Handlebar praised above will be averse to the above, and front load will be somewhat more difficult.
The inner diameter of the handlebar end is 13mm, which is very narrow, so there is no choice of bar end or bar end mirror. 13.5mm is also no good, so it must be 13mm or smaller to fit. I have successfully installed the bar end mirror with the help of the DAYTONA Hi-Sider Universal Product.
View detail
Posh faceNarrow up bar
I don't know. I haven't ridden it yet. View detail
Better than OEM
I temporarily installed this handlebar because I had to wait two months for an archi handlebar to be in stock, but it is easier to ride than the OEM one. It is easier to ride than OEM, but the aperture is not enough. If you have a hard time with OEM, it is worth a try. If you have a hard time with OEM, it is worth a try. View detail
Replace OEMHandlebar
Separate Handlebars are too aggressive; Swallow handle is too short
Therefore, it becomes Condor Handle.
However, in the reverse position (where the Grip is lower than the Clamp), there is too little Clearance between the bar and the Blinker.
View detail
For a slight change in position
[How is it used?
To improve posture
Was the one you received as per Image?
Well, it's Handlebar.
Image
Was the installation difficult?
It has already been drilled for switches and other devices,
If you have experience in Oil replacement, I think you can pimp it out.
How was your experience with it?
It fit my physique.
[Was there anything that disappointed you?
Cable replacement is unnecessary. but I have the impression that it is quite tight and there is no room.
I think you would need to change the handling if necessary,
It may not be easy with W wiring.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, KAWASAKI D Tracker, KAWASAKI KLX250, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, Others
Sporty TRAILHandlebar
Mounted on SEROW225. I used to use a Narrow Handlebar to attack the woods, but it was difficult to control and the form did not look good. The SEROW225 has less of the SEROW's "TRIAL" feel, but it is still great for situations such as Black Cannon and Motocross courses where you are standing still and driving at relatively high speeds. The texture is good, and the color is also very appealing, so I would like to repeat this every time I bend it in the future. View detail
Fits: HARLEY-DAVIDSON FXLRS SOFTAIL LOW RIDER S, HARLEY-DAVIDSON FXLRST SOFTAIL LOW RIDER ST, HARLEY-DAVIDSON FXRST SOFTAIL LOW RIDER EL DIABLO
Pull back easily
It is just right to be able to pull back easily without changing wiring.
If this isn't enough, you could replace the Riser and raise it.
It's cheap and helpful.
View detail
rebel 1100 dct
It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only.
It's a pity that the part needs to be processed.
It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only.
It's a pity that the part needs to be processed ------------------------------------------ ---------------- It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only. It's a pity that the part needs to be processed. It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only. It's a pity that the part needs to be processed. Powered by Google Translator
View detail
This
ZrX2, but DrumstickDrumstick looks good on it! View detail
Fits: HONDA HORNET250, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250, HONDA VTR250, HONDA NC700S, HONDA FTR223, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI ZEPHYR400, YAMAHA XJR400R, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200
This is what it looks like when installed on a KTM 2013 DUKE.
This is what a BMConti2-type Handlebar looks like when attached to an Initial ModelDUKE. Finger is about the same height as Limit. View detail
Bar end mirror for option719
The handlebar width is very narrow and the position is very comfortable. If you are used to NORMAL, it will take some time to get used to the low speed operation. But it is easy because it is made of aluminum.
The brake hose interferes with the meter, so the mounting position is usually fixed, but it is a good product.
View detail
Fits: KAWASAKI D-TRACKER, KAWASAKI KLX250, Others , YAMAHA WR250R, YAMAHA WR250X
There are some good things that only a comp bar can do.
I put a MOTARDMedium comp bar on my CRF250RLY50.
I had worn cx bar mx-123Blue before, but I thought it would be more comfortable with a little more aperture in terms of position. I decided that the comp bar would fit CRF250RLY50, which is not so strong and rigid, and bought it.
As a result Large was the right answer
The position, moderate rigidity of the handlebar, and coloring are perfect.
View detail
Stability only possible with Fat bar
This is a Review at least 6 months after purchase.
Quantity:Pair (for Left and Right) Fell multiple times on Tarmac in (SlipDown type) were, but there are no visible signs of breakage or bending, and the feel of the product remains the same.
The length of the bar is 800mm, which may be a little too large for some Japanese, perhaps due in part to the length adapted to the physique of Westerners. I use it with the bar packed.
Motocross athletes often use them without filling them these days, so if you take that into account, you can use them without any particular concerns.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KLX150S, Others
Used for DT50.
I'm 184cm tall and the OEMHandlebar was making me feel like Curve was repricing, so I changed it.
Operability has been improved.
View detail
Fits: YAMAHA TTR125LW, YAMAHA TTR125LWE, HONDA CRF125F, KAWASAKI KLX110
Recommended Handlebar
Product Name
RENTHAL Renthal 7/8-inches Competition Bar 110cc (KLX110・TTR125)
Item Number
G4531
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
30 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this one because it is supposed to make posture easier during StandingPosition, etc. I also chose this one because I believe in the Brand of Renthal.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
I think it would be easy if switches are installed properly.
How was your experience with it?
I had no idea that just changing the position of the Handlebar would make such a difference. I think it is better to change it.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
Not much, I think Coloring would be nice to have more.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CB400SB Revo, HONDA CB400SF Revo, HONDA CB400SF, HONDA CB400SB
For an easy and good looking Position!
I fell and bent it. If I'm going to replace it, I want to replace it with a cool Other Brand Product." I replaced it with a new one. Anyway, the gold color is cool! And the most important position, I am satisfied with the large size of the Handlebar, which makes me less tired when I am touring! I strongly recommend replacing the handlebar before replacing the exhaust system! View detail
Fits: HONDA CRF250R, HONDA CRF450R, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KX125, KAWASAKI KX250, HONDA CR250, HONDA CR125
Anodized is beautiful.
MX-123 was installed on a CRF250.
OEMSeat is modified with 3cm up high seat and 14mm up spacer to get the best position.
View detail