Reviews
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e HEV
It is perfect.
Mounted on Pcx160.
The right hole for the switch box is a simple addition, while the left hole is re-drilled about 2cm outward from the OEM position. (5mm Drill) 。
The line WOUNDS somewhat, although I worked with care because the line is only lightly rubbed.
I installed High Solo at the same time and had no problems.
Very good product
View detail
Fits: HONDA PCX125HYBRID, HONDA PCX125HYBRID e:HEV, HONDA PCX125, HONDA PCX150, HONDA PCX160
It is an excellent product as expected.
I bought it after a lot of research. I installed it on a PCX125, but I was a little nervous because I did not know that the bar end could not be used as standard. (Sweat) The position can be raised a little to make it look like a modest onyx w, or lowered to make it look like a low-down position, so it can be enjoyed for a long time. ^ ^ View detail
Fits: HONDA GB250 CLUBMAN, KAWASAKI W400, KAWASAKI 250TR, KAWASAKI ESTRELLA, KAWASAKI ESTRELLARS, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, YAMAHA SR400, YAMAHA SR500, YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250), YAMAHA DRAGSTAR250, YAMAHA TW200, YAMAHA TW200E, YAMAHA TW225E, KAWASAKI W650
For VIRAGO 250.
It turned out pretty cool!
Clutch Wire、
Refreshing is better to replace Accelerator Wire and Choke Wire!
View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA MONKEY
It fit well without cable extension. exorcism
Delivery is fast and packaging is always perfect.
It was installed on cb1100ex. It can be installed without cable extension and the position has been improved.
It has risen slightly, but my waist has become more comfortable and the design has become prettier.
I am so satisfied. thank you -------------------------------------------------- -------- Delivery is fast and the packaging is always perfect. It is mounted on the CB1100EX. It can be installed in pure without extending the cable and the position is improved. I climbed a little bit, my waist was comfortable and the design was pretty. I'm so satisfied. thank you Powered by Google Translator
View detail
Fits: HONDA CRF450R, KAWASAKI KLX450R, KAWASAKI KX450F, KAWASAKI KX125, HONDA CRF250R, KAWASAKI KX250, KAWASAKI KX250F, HONDA CR250, HONDA CR125
Position improvement by weakening the pull
Mounted on CRF250L (MD38 model).
Purchased the same height and width, but wanted to try something with a weaker pull (squeeze).
The size of MX-123 is almost the same etc. size as RacerOEM (CRF250R, CRF450R).
The arms have a more natural shape than OEMSize, and the odd Stress is reduced.
The angle of the hand holding the handlebar has also changed, making it easier to operate the throttle.
This may be due to the width of my shoulders for my height. (*He is 173cm tall.)
It is interesting to see how one handlebar can change things.
View detail
Fits: HONDA CB1100, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA FTR223, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI ZrX1200ZrX1200 DAEG, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, Others , YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
Favorite Handlebar
I think this handlebar fits well with TRACKER and Boha Style Custom.
I had purchased the Plating type in the past, but this time I bought the Black one in stock.
View detail
Fits: Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, HONDA MONKEY
good
good View detail
Fits: HONDA MSX125SF, HONDA MONKEY125, HONDA MSX125, HONDA GROM, HONDA GROM, HONDA MSX GROM, HONDA DAX125, HONDA MONKEY125
Light in weight but still strong in construction
About quality and texture, I can confirm that the quality is great and that the material used is aluminum tubing with a black anodized finish. About the feeling of use, These handle bars are light in weight but still strong in their construction, I find the positioning of these handle bars much more comfortable then the original Honda handle bars. Products to buy together, I chose to add a new throttle tube, new grips and new bar end weights when installing these handle bars but the only part you cannot reuse from the original Honda parts is the bar end weights as the new handle bars do not have an insert to secure them. So bar end weights would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the handle bars for my installation was average due to the high number of parts that required removal to allow for the new handle bars to be installed which ended up taking sometime to complete. Cost performance and comparison with other products, Pricing of this product is great. You receive a nicely finished handle bar that look original and fit well. Other handle bars available for the Grom are much higher in price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff always got back to me with any concerns I had over the entire process. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
It was easy to install.
There is a hole in the handlebar. Installed on 2014 Z1000. -------------------------------------------------- -------- The handlebar has a hole. Equipped with the 2014 Z1000. Powered by Google Translator View detail
perfect fit a little narrow
item arrived fast to USA in perfect condition with very nice packaging. Bars fit perfect with holes already drilled in correct positions. biggest problem is they are a little narrow making cable routing a possible problem depending on you modifications. my clutch cable hits stock gauges pretty bad. View detail
Fits: KAWASAKI D Tracker, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, HONDA CRF250M, HONDA CRF250L, KAWASAKI KLX250, Others
Handlebar exchange
Handlebar was bent and had to be replaced.
We decided to use the same Brand that was originally installed.
View detail
SR400 is perfect.
I reverse-mounted it on my SR400. I like the angle of the droop and aperture, and the texture of Stainless Steel. The switch, grips, and wires are also fine as they are in NORMAL. View detail
Fits: HONDA FORZA 300
ตรงรุ่น Forza300 ส่งรวดเร็ว บริการดี View detail
Condor retrofit
I installed it on an ST250E. I tried to adjust the angle so that it would not hit the tank by reversing it, but the opposite side was no mark! The Handlebar Stopper was installed in a hurry and now I am happy with the Handlebar. View detail
Handlebar replacement to improve position
The Intermediate is the perfect height and the Riding position is perfect. View detail
NicePosition
It took a lot of time and effort to replace it, and although I haven't tried it out yet, it feels pretty good to straddle. View detail
Fits: HONDA FTR223, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, HONDA MONKEY
DL1000 V-STROM250 Handlebar replacement
Installed on VSTROM250 。 The handlebar is narrow and has a strong aperture. The width is the same as SEROW, which improves the riding posture. However, the clutch wire and brake hose are tight and the hose guide has to be removed. I have no problem because I use ThailandBand to hold the necessary parts. View detail
Fits: YAMAHA MT-09, YAMAHA XSR700, YAMAHA XSR900
Yamaha FZ-09 Handlebars
Awesome. Handlebars arrived in 5 days. Product was packaged well. Looks like it will work great with my FZ09. Great service. Will buy from again. View detail
ZETA CompleteHandlebar SEROW250
The holes were pre-drilled and easy to install. The design is good, and the handle position is good for standing on forest roads. View detail
Fits: HONDA glom, HONDA glom
Posture changes
Product Name
HURRICANE HURRICANE Forward Conti2 type Φ7/8 inches Handlebar
Item Number
HB0038B-10
Vehicles
Grom ( JC61 ) 2015
Number of man-hours
About 1 hour
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
When we installed Grom's Rear Sets, we thought it would be better to change the handlebar as well, so we chose this one. I also found many people on the Net who had chosen this handlebar for their Groms, so I decided to purchase it.
Was the one you received as per Image?
It was as shown in the Image, only with Handlebar.
Was the installation difficult?
I think it is easy because the mounting holes are already drilled. However, if you don't organize and move the Cable system, it doesn't fit very well. It took me a long time to fix that part.
How was your experience with it?
The posture has been changed to an aggressive posture. By changing the position of the hips, you can go from a forward leaning posture to a comfortable upright position.
[Was there anything that disappointed you?
Nothing in particular. I would be happy if it were cheaper.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail