Reviews
Fits: YAMAHA TTR125LW, YAMAHA TTR125LWE, HONDA CRF125F, KAWASAKI KLX110
Recommended Handlebar
Product Name
RENTHAL Renthal 7/8-inches Competition Bar 110cc (KLX110・TTR125)
Item Number
G4531
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
30 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this one because it is supposed to make posture easier during StandingPosition, etc. I also chose this one because I believe in the Brand of Renthal.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
I think it would be easy if switches are installed properly.
How was your experience with it?
I had no idea that just changing the position of the Handlebar would make such a difference. I think it is better to change it.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
Not much, I think Coloring would be nice to have more.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Would recemond these to mx or woods users, have used them on other bikes and they hold up great!
I bent old handlebars and bought these. Did a lot of research and wanted a quality handlebar. I really like them.Really good quality. It looks good and feels good. These bars build confidence.Highly recommend Renthal. View detail
Fits: YAMAHA TTR125LW, YAMAHA TTR125LWE, HONDA CRF125F, KAWASAKI KLX110
Mounted on TT-R125
I am 175cm tall, so I am low in Position.
However, any higher and it would be Mothers' bicycle style, so there is no choice.
View detail
I love it
The Goggles bar is good, choose here.
At first, I installed it as is and rode it.
I felt it was too wide, so I used Quantity:Pair (for Left and Right) Cut each 10mm by 10mm with
Just right. 802mm→about 782mm
It was thick but lightweight.
View detail
Almost same Position as OEM
The material is solid, so I had a little trouble drilling the holes, but I was able to install it without any problems. View detail
Fits: YAMAHA TTR125LW, YAMAHA TTR125LWE, HONDA CRF125F, KAWASAKI KLX110
This is for Minimoto
[How is it used?
I bought a CRF125F last year and have been waiting for a long time for this Handlebar, which has become a standard when Minimoto is converted to Large person Spec.
In any case, the position is raised. Riding is more comfortable and standing is easier because the knees do not hit the floor.
Was the one you received as per Image?
It is just like the Image. I think the quality is also one of the best in Handlebar.
Was the installation difficult?
There is nothing particularly difficult about it.
How was your experience with it?
It feels right. I had it on my old carburetor CRF125F.
[Included Parts:were they on?
No. You should buy Grip (PillowGrip:https://www.webike.net/sd/21147489/) and Grip bond (https://www.webike.net/tab/parts/bm/4034/).
[Was there anything that disappointed you?
Nothing in particular. But the delivery time. Anyway, it is long.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
This is an overseas product, often thinly stocked due to Corona relations. If you see it, buy it. If you can't find it, I found a ZETA CX bar (https://www.webike.net/sd/25578667/) with similar dimensions, which is also a recommendation.
View detail
Better responsiveness.
5.The handlebar diameter is 5 inches higher than that of the Normal handlebar, but it is only +&-alpha; higher. If you have purchased an off-road motorcycle and are dissatisfied with its handling, this handlebar will improve the responsiveness. It is nice to be able to stand on a rough road and have the control work. View detail
Used by D Tracker
[How is it used?
Mounted on D Tracker.
Application:Motard race (Circuit,Dirt) ,Off-road,Touring
Handlebar width is not trimmed. (Use the width as it is.)
Many tumbles
Was the one you received as per Image?
As per the image. The height is about average for an off-road handlebar, taller than ZETA's 22.2mm Super Moto-LowMODEL.
Was the installation difficult?
There are many parts that need to be removed, such as the handlebar body, switches, throttle, etc. It will take some time, but if you have the enthusiasm to replace the handlebar, there will be no problem.
If you want to drill a hole for the switch attachment and trim the width of the handlebar, you will need a power tool and a thread saw, which will increase the difficulty.
In addition, there is no need to extend the Clutch Cable or Throttle Wire even if the Handlebar width remains the same. It can be used as is. (Can be pimped out.)
How was your experience with it?
This product is a Handlebar that is one of the Off-roadHandlebars with a normal height.
The higher the handlebar position, the easier it is to ride when standing in the Dirt Section. I felt that the higher the Handlebar position, the more stable the ride.
In order to shorten my time, I needed to be fast in the Tarmac section.
For this reason, we decided to introduce the Handlebar, which is low in height. (Super Moto-Low on ZETA CX bars)
On the other hand, for city driving and touring, the higher handlebar position allows for a more comfortable and relaxed riding position, so if you feel uncomfortable with the height of the OEM handlebar on MOTARD and TRAIL vehicles, you may want to introduce this product because of its relatively high handlebar height and easy driving. If you feel uncomfortable with the OEM handlebar height of MOTARD and TRAIL vehicles, you may want to install this product since the handlebar height is relatively high and easy to drive.
I have long arms, so I didn't feel uncomfortable even with the Handlebar width untrimmed, but if you feel uncomfortable with too wide a width, don't hesitate to trim the Handlebar width.
An uncomfortable feeling when gripping the Handlebar will hinder safe riding.
As for durability, I have crashed many times on both Tarmac and Dirt, and the Handlebar has never bent. (No high SIDE falls.)
Attachment to the Handlebar is also no problem.
[Included Parts:were they on?
Bar pad
[Was there anything that disappointed you?
nothing special
Point and hang of installation
Describe the hang of the switch box attachment, not the HandlebarBody.
Positioning for the Switch box (Anti-rotation) There is a projection for
If you want to use it for secure positioning, you need to drill a hole in the HandlebarBody. If you don't drill a hole in the handlebar body, it won't physically attach.
So, if you want to install the switch box without drilling holes, you can scrape off the protrusions on the switch box.
In that case, use the Switch boxMounting Bolt (Screw) It is important to tighten the screws as tightly as possible to prevent the switch box from rotating.
I've had to scrape off the protrusions in previous Handlebar replacements, but the Switch box spins slightly and I didn't feel any problems there.
In the case of hole drilling
Electric Drill
Drill (Φ5 or Φ6)
Jig for drilling
Cle 556 (substitute for cutting oil)
It is safe to work with the
If you do not have a drilling jig, you can use the
Hammer
Punch
Make an indentation in the hole with a punch to prevent the drill from escaping.
Then I concentrated on drilling.
View detail
The color is wrong-barpad
The quality of the product is excellent just by looking at it without being fitted. However, the barpad was delivered in red color unlike the picture, so I bought it again separately from other websites. The website needs to be modified. View detail
I think it's good
I selected it with reference to the size of ZETA's COMP Handlebar Motard-Low, which is the standard of the SEROW250.
It is fitted with a tilt-back position.
View detail
Robust Thus, the strongest
A friend of mine was a believer in this product, so I installed it on his WR250R as a missionary Originally, I wouldn't have gone to the trouble of buying this product, which has a different diameter of clamping part from OEM I think that the Handlebar & Hand guard was deformed by accident It was also Timing who was looking for a new handlebar It must have been the Fat bar god's plan Joking aside, as I mentioned earlier, when I was trying to install this product on my WR250R You will need to replace the Handlebar Clamp The clamps for the YZ made by Y's Gear are only one more part to buy So I feel safe! As far as ride quality is concerned, the Handlebar stiffness has been increased so that the road gap is very strong Dirt, Asphalt and peeling Small steps, etc. have raised a sense of security and It also felt like it would improve control I don't want to think about it again, but in the unfortunate event of an Accident, I'd rather not have to worry about it than the OEMHandlebar Fat bar seems to endure better than the Fat Bar, lol View detail
RENTHAL [Type] Biropoto/Stewart
I put it on my WR250X
The bar pad is BlackBase and the letters RENTHAL are white with red ruffles
Color on white letters:I wanted a gray rim, but the color of Bar pad was changed by RENTHAL without notice I've heard it's coming
I bought the size to be close to the OEMHandlebar, but the pull (Sweep ) is quite shallow and almost straight
It's not hard to ride, but I've been riding it every day for two months and I still have it "That's a straight handlebar I think
I chose Black as the bar color I'm happy with the look and feel of the Custom made bar
The stiffness is foldable, but I don't think there's any reduction in vibration (as much as the OEMs do, my hands get shifty) )
From the person who does Off-road Driving in a sitting position in the Seat is easier with a stronger pull I've heard that, so I'm thinking of a MODEL with a stronger pull next
I've heard that Standing is easier to keep straight, but I don't plan to run off-road
View detail
Very good
i used to use it in SEROW for Off-Road
This time I bought one for my D Tracker as well
It's still good
I was wondering if I should make it LOW because it's a MOTARD
I'm glad I went with Enduro
Parenthesis is better than anything else
It's nice to be on the first floor
Because of the width, the Accelerator Wire is a little bit tighter, but
You can put it on NORMAL as well
View detail
It is good.
Recently I only got in Touring-like applications so I wanted a thing with a high Handlebar position and a strong drawing, I bought 5 Handlebar.
Initially ZOTA CX MOTARDMedium, then CX MX - 412, the third one ZETA COMPGT 80, and RENTHAL 693 Quantity : I bought 2pc.
RENTAL 1 pc Eye fails Throttle's anti-rotation drill and same thing as Quantity : 2 pc I bought it.
Zeta's CX and RENTHAL, Aluminum's material is probably 7010T6's thing, but when drilling with Drill, RENTHAL was overwhelmingly hard. Was the film of Anodized stiff?
ZETA's COMP was fairly soft feeling.
Bent condition is slightly narrower than OEM, height is about + 10 mm, pull is about 10 mm in front, good Sitting priority Position without elbow.
Wire, Harness is NORMAL and Large is durable.
The other three types of ZETA Handlebar are Wire, Harness is NORMAL and Large is durable.
This time the pull to the front is Large, so I had the least room in changing it up to now.
I put an image but I do not think it is a bit confusing, but Handodbar's own Anodized, Laser print Logo, Surface Sandblast processing overwhelmingly texture is good. I thought about returning to MX - 412 of CX with 1 pc eye drilling failure, but I bought another one for the goodness of RENTHAL 's texture.
Is BraceClamp cooler than ZETA.
I do not attach a bar pad every time. When I had KLX, when I was going to a forest road I was wearing it, but now it is MOTARD and it is only pavement Touring so it is not necessary. Although it is the best reason that Key is difficult to insert.
I think that the speed of correspondence of Webike's product shipping is also wonderful.
Overall good shopping was made.
View detail
It became easier to hold compared to NORMAL
He is 170 cm 70 kg, hands and legs are short but I bought crf 250 l type LD and ran around 800 km with Normal handle and changed it to this Handlebar. Since the hand is short, I got a forward bending attitude in Normal handle and I wanted to bring Handlebar a little bit in front and attached this Handlebar. Drilling is necessary, but installation was easy. Various Wire, Harness classes can stay as it is. Strength, etc. are not yet understood for a long period of use, but I think that the interior is thicker than NORMAL so it is good. View detail
Easy to install and effective Outclassing
RC in klx 250 / I installed KAWASAKI.
I was planning to make ZETA's COMP in terms of being able to attach, but purchasing this with gambling because the color I wanted was out of stock.
Although I had prepared for various wire exchanges, I was able to attach a pon with no problems with the shape which is almost the same as OEM if it arrived. There is just a bit higher height than the OEM, the aperture is shallow.
I felt it running, after all, Handling got lightened. Just being on a ride makes it fun. Corner and UTurn are also Lunulun.
I was worried about vibration due to weight loss of Handlebar, but I was not at all worried. Is this neighborhood an individual difference?.
By the way, the Bar pad received what RENTHAL is surrounded by Red. It is different from the image of Sample, but I liked this person so it is pretty a result.
It is rather expensive than the one of ZETA, but personally it was a product satisfying Large.
It will be durable in Large even if it is cockled with this!
View detail
good
It installed in 17CRF 250L. I need to drill two places, but I opened with a 5 mm diameter Drill at the Large body. Cable and others can be installed without problems as OEM. One thing that was sent to me by Bar pad is BlackRed though it was BlackWhite in the picture. Buyer can only judge on that picture, so I wanted the explanation properly. (I wanted BlackWhite - - - ) View detail
Strong Full size XG 250 TRICKER good
My Full size XG 250 TRICKER is exchanged for this Handlebar.
Renthal's TRIALHandlebar has several different heights, but Full size XG 250 TRICKER has the lowest of 4. It was recommended by Motorcycle shop that 5-inches is good.
(SEROW, Full size XG 250 TRICKER is a famous shop. )
When the height of the Handlebar was too much, it was that it was difficult for the holders to get used to turns, such as Hill climb on off-road driving.
When Klx 125 was also equipped with Renthal's Handlebar and failed at Hill climb and Motorcycle fell off the slope, the angle of the Handlebar turned GRU from Clamp and the Handlebar itself did not bend at all did.
View detail
I think that it is good if running like TRIAL
I attached this TRIAL Handlebar to SEROW 225. Because it is wide, so it fits your own Quantity : Pair (for Left and Right) I made 15 mm Cut. I think that it was easy to apply weights such as Front up and it was easy to do Turn at low speed. View detail
Almost NORMAL
Handlebar riding SEROW 225 rusted and it looks bad so I replaced it with Renthal's STREETFIGHTER. After all Renthal! Pad is unbearable Parenthesis Good ?? Shape is also NORMAL and nothing complained, so this STREETFIGHTER is almost the same as NORMAL so you can ride it without feeling uncomfortable after exchanging. Actually I wanted a black color .... View detail