Reviews
Fits: HONDA FORZA, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125Hybrid, HONDA PCX150, HONDA PCX160, HONDA ADV150, HONDA ADV160
Handling becomes lighter.
Running test
Weight of Bar End End 200g→170g." The Handle Ring becomes lighter due to the change of the handlebar's thickness, and the vibration transmitted to the handlebar is not a problem, but it may lack stability for those who often drive at high speeds. However, if you drive a lot at high speed, it may lack stability.
View detail
Fits: HONDA FORZA, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125Hybrid, HONDA PCX150, HONDA PCX160, HONDA ADV150, HONDA ADV160
The Shock driver in the instruction manual is not required.
About the product
The texture is very good, but it is smaller than expected. Grip and Bar End Cap A gap opens between the (Total weight:170g/OEM equivalent)
Installation
It's in the instruction manual. Shock driver." is not required.
Utilizing BOXWrench to meet Cap bolt (M6×40) standards. +Bit." and expressed in 10 levels of force, it can be loosened with about 30% of the force.Cap bolt has a Screw lock." A small amount of the "P" is applied and can be installed in about 5 minutes.
About the running test
We will re-submit if we feel a change is warranted.
View detail
Fits: HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB, Others For STD Handlebar
Looks great
Love the look of this flat bar end thou it feels slightly lighter than the stock bar ends. Do prepare a flat wrench to hold the handlebar inner tube in place so that it doesn't move around when you're trying to screw/unscrew the bar ends View detail
clean
Installation is easy. The texture is good and stylish. View detail
Very nice
I love the product, it is beautiful and easy to use. View detail
Cool and cool.
Handlebar was not NORMAL, so only the Cap portion was used.
The Spacer to be fixed was purchased cheaply from Amazon and a longer Screw was purchased from Home center and installed.
Small machining is selected, but there is no Cap machining, just Spacer and Screw procurement.
View detail
Fits: HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB, Others For STD Handlebar
Looks Parenthesis nice
The texture was good and gave a sense of luxury.
I don't know about the performance aspect.
View detail
cute little
[How is it used?
Used for HORNET 900
Handlebar uses ↓.
https://www.webike.net/sd/21744833/
How was your experience with it?
It is lightweight and does not reduce vibration.
I like the transparency because it is playful.
View detail
Fits: HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB, Others For STD Handlebar
Total coordinate
The product itself is perfect in shape and anodized color. I think that it is the same in the case of installing other Manufacturer's goods, but it is one hardship to remove the Bar End of NORMAL, even if I use Impact Driver (Shock driver manual) etc. as Instruction Manual, it is considerably It is fiddly. I was not able to do it manually, and I used the electric Impact Driver. Bolt is closed quite hard. If you are not confident, you should ask a motorcycle shop to replace it. View detail
KITACO Clear Bar End Cap
A good Japan's brand bar end cap for motorcycle. I bought the color clear so i was a highlight for my bike. The best thing that i saw in this bar end cap is the color. Because it is a clear color so it's easy to turn yellow when use in a long time. However, with this bar end, i used it in 6 months until now, the color still the same as the color before. Recommend for bikers who want to buy a good bar end for their bike. View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA PCX160, HONDA FORZA, HONDA PCX125-E:HEV, HONDA ADV160, HONDA ADV150
It's just the right size and weight
It is OEM Bar End of MONKEY125, but it feels a little small I like the shape and the plating, but I want to install a little more large-textured Bar End I did
The Bar End is a little heavy to reduce the vibration of the Handlebar, but the KITACO's Bar End weighs about the same as the OEM, so functionality is not a problem
This is the OEM Bar End, but it's fixed with a Plus screw, which is very It's hard, I can't get it off by turning it normally with a Phillips Screwdriver I used Impact Driver
A comparison of the OEM Bar End and KITACO's Union Bar End Cap shows Plating type, so the shine is the same as OEM The length and thickness is a little bit larger than OEM It has a three-dimensional finish because it is made of parts
It's a little bit expensive, but it's a more integrated Bar End, and the color variations are It can be made to fit the body of the car, which is recommended
View detail
Received and immediately ...
I replaced it! This product is about the same weight as OEM and Balance is also good. I also like Design and I decided to go with Motorcycle's AttachmentCatalogue as well.
Work is to remove the OEM When it is a normal Driver Screw is hard so do not lick your head Impact Driver (Referring to other people's impressions) With BALIBALI cuisine for a moment (^_^) v
Next, apply Screw lock to the Bolt of the new Cap, align the unevenness of the ground contact surface of Cap, and immediately tighten it with Hexagonal Wrench.
I was working while dancing with Shure, but it was completed in about 10 minutes. It will be about five minutes if I do it quietly.
With the last Bolt retightening, there was not a reasonable tool to fix the Cap which would rotate, there was no choice but to tighten it with Wrench while grasping by hand. So, I'm a little worried about whether it will come loose with vibration, but I believe in the power of Screw lock (^. ^;)
And the impression after exchanging ... Stainless Steel glows and becomes one point, a little luxurious feeling comes out around Handlebar and it gets better Parenthesis It is satisfactory (^-^)
However, whether the cutting angle of the ground contact surface of Cap is not horizontal, or whether the core does not come out by grinding the table, or if the cap is rotated after the installation, the head delicately shook the head.. (Bitter) That's disappointing. ('Д `) Also, something like grinding streaks on the machined surface of the surface is a bit .... So ☆ Four.
With tools, it's easy and casual Dress-up so it's Recommendation!
View detail
Fits: HONDA FORZA, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125Hybrid, HONDA PCX150, HONDA PCX160, HONDA ADV150, HONDA ADV160
I installed it in Blue color PCX
I bought this item for One point around Handlebar. In order to install it, it is necessary to remove the OEM Bar End, but in ordinary Driver it does not relax at all and we relax the Impact Driver by Barrel at Home center. It became Accent around Handlebar as aimed.
I am completely satisfied with my self.
View detail