Reviews
Easy to use
There were not many options available for the GSX-S1000GT, but I am satisfied with the product. It is easy to adjust.
The shape of the Lever is common, but I personally would have liked the cross section to be more rounded for easier gripping.
View detail
ZETA X3 Protector
I installed the AdventureArmor Handguard and purchased the Protector from the same ZETA.
Although I was not sure if I wanted to go with the XC, which is a bit larger, I was happy with the X3 because it was a small motorcycle to which I would install it.
The Size is good for those who are OK as long as they do not get hit on the fingers by flying rocks or hard insects while driving, because it is Small for wind protection.
The Master cylinder guard, removable with Screw, was also a simple but interesting GuiMick.
Four bolts are also included, making it easy to install on vehicles that already have a hand guard installed.
The color White can be Blue-ish or Green-ish. I saw a Review that said
The color of the one I received was what can only be described as White when viewed indoors or in the sun.
Perhaps there is a slight difference depending on the production lot.
View detail
Shape is almost OEM
OEM Clutch initial position is not quite right, so it was replaced.
I tried to use a Z company's one before this one, but it had the same model number as the S1000, but the shape of the cutout for the mounting position was different, so it stopped in a slightly retracted position. I wanted to make the initial position closer, so the position was better, but the Low RPMAssist was almost ineffective. I don't need it, but I don't like the fact that a certain function doesn't work, so I decided to use this one, which has a different model number from the S1000 and the GT. The adjustment method is Screw, which is a bit uncool, but it works just fine.
I changed the color, but the shape is almost the same as the OEM shape, so I wondered if there was something more I could have done. I thought it would have been nice to have something more.
View detail
DL1000 V-STROM250SX exclusive DAYTONA Hazard kit installed
I was looking for a Hazard switch for my DL1000 V-STROM250SX, and when DAYTONA came out with a switch kit for the 250SX, I immediately went to Webike and bought it. As expected of a dedicated kit, there is no extra wiring, no cutting or pasting of wiring, and I was able to install it without worry. Now I can use the hazard lamp on the highway with no worries! Personally, I believe that motorcycles are safer when they are well lit and stand out. View detail
Conti II type can be NORMAL.
The OEMHandlebar is so large that if it is replaced with a narrower one, the OEM will have a little extra space.
However, it could be left as OEM, but it interfered with the RadiatorRight Side surface.
It is a product that is better to have than not to have.
View detail
Fits: HONDA GB350, HONDA GB350S
I think COSPA is expensive
I bought a new car with the new Type added and I replaced it.
The bend of Lever was good and it was easy to finger.
Clutch side rattles have been reduced and the clutch is easy to grip.
Some products are expensive, but Quantity:Pair (for Left and Right) So I think the cost performance is high.
View detail
please note
OEM Grip Heater Installation is not easy, the included bolt does not reach the handlebar weight, and even if the handlebar weight is removed, it cannot be installed with the Included Parts:. View detail
Neat around the Stem. I'm glad I bought it.
The Flasher is built into the x2Protector, and by removing the OEMBlinker, the Stem area is refreshed, making maintenance around the Stem area easier. View detail
If Switch Refreshing,
It would be perfect if the Switch could be embedded! View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Nice upgrade
They will fit. They fit in the factory perches as good as the factory levers, and do fit behind the factory handguards with plenty of clearance. They are a well made product. Best levers I've ever owned. Crashed multiple times in hard pack, and soft conditions. They haven't even deformed. Will purchase for every dirtbike I own moving forward. View detail
I don't know. Self-satisfied.
The Throttle Wire was right above the Brake Lever Screw, unlike the Instruction Manual, so it was difficult to remove the Throttle Wire, which was Large and strange.
If not, installation is easy.
The quality is high, and the adjustable lever is nice, but it might be better if it wasn't so expensive.
The price is quite expensive.
View detail
Fits: SUZUKI GSX750S, SUZUKI GSX750SS, SUZUKI GS1000
No dramatic changes.
It is the same length and construction as OEM, but the wire itself is multi-twisted to ensure flexibility. It may be because it is brand new just after the replacement, but when you grip it slowly, you can see that there is no roughness. The gripping force remains the same.
I think it would be good if the product could be used for a long time without any roughness.
The first time it arrived, it was triple-tied and bent at a tight curvature, so I requested a replacement because the bagging method does not take into account anything in terms of product characteristics. I requested a replacement because the bagging method does not take into account the characteristics of the product.
View detail
Fits: HONDA PCX160, HONDA PCX, HONDA ADV150
Appearance and functionality
There is no rattling, the lever can be adjusted securely, and the grip, texture, and price are all good for this type of product.
If I had to say so, it would be better if it had a parking function!
There are a variety of inexpensive products on the market, but after much searching, I am glad I chose this product.
View detail
Fits 23-year 400X
I've been trying to find out and inquire if it will fit a 23 nc56 400X.
I could not confirm it, but I was able to install it.
It seems that the brake master is different from the previous generation SingleDisc brake models.
Installation was easy.
View detail
Fits: HONDA DAX125, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA SUPER CUB110PRO
Mounted on CROSS CUBJA60
Installed for dress-up and ease of gripping.
My hands are on the Large size, but OEM is a bit far away and my hands get tired after riding long distances, so I bought this. I am glad I replaced it.
View detail
Fits: HARLEY-DAVIDSON Sportster S, HARLEY-DAVIDSON Pan America, HARLEY-DAVIDSON Nightster Special
Flashing switchCover
Very good!
The switch knob was originally shaped to be far away and difficult to operate for Small Saijapanese with hands, and it was a part that we had to put up with.
Push cancellation was easy and finally Refreshing.
If I may say so, it would be better if there is an arrow or some other prominent mark-like label or paint on the top surface. I applied seals, but the surface is matte textured, so seals tend to peel off easily.
View detail
Firmly.
I could not tell how light the Clutch was, but the build quality was solid, as if it were an OEM product.
Durability, that is the most decisive factor.
View detail
Might be useful to have.
I think it depends on the way you fall, but in my case, when I fell standing up on a forest road, this helped me to minimize the Damage. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Lever is rounded for easy grip
Texture and finish are both very beautiful
Unlike other types, Touring type has a rounded lever for easy gripping.
Easy to adjust lever position
View detail
Fits: SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSR750
The texture is very good.
As expected from Made in Japan, the texture and finish are very beautiful.
Easy to operate as both lever and position can be changed.
View detail