Reviews
Good construction, but questionable shape
After installation, the handlebar moves forward about 1 cm.
This makes it easier to ride, but the handlebar operation becomes slower.
The product has a martial construction, but it feels good to the touch and is not of bad quality.
In the case of 28 cm, the bottom of the product has a slightly convex shape instead of the 28 cm semicircle.
Is it to fit some kind of car model? Maybe it is.
This creates a cavity in the Mount and this product's mounting area, which is both unsightly and puddles in the rain.
If you take appearance into account, it is a good product.
View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2 SX SE
I made a mistake ordering.
I ordered the wrong year of vehicle and had to repurchase Attachment.
I have not installed the Attachment yet because I have not received the Attachment I ordered, but I am looking forward to receiving the Attachment.
View detail
Fits: SUZUKI GSX1300R HAYABUSA GSX1300R HAYABUSA
I think it is a good one.
The installation itself is easy,
If you have the tools, you can do it while looking at the Instruction Manual,
You should be able to do this normally,
The quality is also fine,
One area of concern,
I wish Lever was a little more rounded,
I am sure Manufacturer has his own reasons,
Only the Clutch Side could be a little more rounded,
This is only my impression of its use.
View detail
Well, I guess it's normal.
I bought it because I broke my OEMBrake lever standing up.
I chose Foldable because I thought I might have to stand up again.
Installation was easy for both Brake and Clutch.
The touch is TIGHTLY different and I guess there are different tastes, but I have a good feel for it.
However, since the Clutch Side is hung by two or three fingers, the Small and Ring fingers are sandwiched between the Grip.
Is this what it looks like since Lever is straightened?
I feel like my own habits are bad....
Wouldn't it be better to have the Lever with a little R like the Touring type so it doesn't get pinched?
I forget what the OEM was like.
View detail
It is a classic.
It is a consumable item, but the Material is hard and breaks easily.
Quantity because the shape is good.:This is my 2nd Set and I wish it was a little more flexible.
View detail
Fits: SUZUKI GSX-R1000, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA XJ6N, YAMAHA YZF-R1S, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, SUZUKI GSX-R600, YAMAHA FZ-07, YAMAHA MT-07, YAMAHA FZ-09, YAMAHA MT-09, YAMAHA MT-09SP, SUZUKI GSX-R750, SUZUKI GSX-R1000R
SP is not available
I have no complaints about the PARTS used by YOSHIMURA,
Installation is not particularly difficult. However, when I tried to install it, I found that the separate parts to hold the SafetySwitch installed on the lever hit the Holder! (In reality, only half of the money is seized) Why? Why? I inquired and found that sp is not available for installation!
I was able to get separate parts for the PilotLever and installed them. When I bought the car, I think that they do not distinguish between the sp and normal models, although they do give the year of the car. If you are going to purchase a car, please be careful! I have no complaints about the product itself.
View detail
Fits: KAWASAKI Z1100R, KAWASAKI Z1000J, KAWASAKI GPz1100, KAWASAKI 750 Turbo/Z750 Turbo, KAWASAKI Z1000R
Yesterday it worked fine!
The OEM Engine Starter Motor was replaced due to poor response.
I just replaced the Coupler and it worked fine.
Wiring is shorter than OEM, so the handling has been changed.
OEM passes between Meter and Cowl, but cannot reach it.
The frame is attached to the handlebar with Tie Wrap.
View detail
Fits: HONDA CB1000R, HONDA CBR1000RR
not quite
Spec. change from U-KANAYAShort.
I bought it because of the ability to adjust the length to my liking. However, the Clutch Side is the smallest width and the Quantity:Set but it is far away. Further long distance makes my fingers hurt at the gate of Lever. Is it a matter of getting used to it? ??
View detail
Brake master lever replacement
The CORSA Corta Lever is slim and I felt uncomfortable from the thicker Lever I had been used to, so I replaced it with Koken's AeroLever.
Basically the finger Quantity:Since it is a 2pc hang, I selected the Short lever which is available in stock.
However, the grip was as expected, but it was too warped compared to the OEM Lever, or maybe it is because we have small hands, or maybe the Lever was too far away and we failed even though we set it at the front of the Lever adjustment range of the CORSA Corta….
At any rate, I managed to get to the acceptable Limit position by changing the CORSA Corta Lever play from NORMAL to SPORTS.
Normally, I would prefer the RACING position, which is much closer, but since it is play 0, I thought I would get used to the Sports Response for a while, and if it feels uncomfortable, I would try the RACING position.
I often put my finger on the tip of the lever, but is the base of the lever (closest part) correct? (Is it correct to put your finger on the base of the lever (the part closest to the base of the lever)? If you put your finger near the tip of the lever, the lever may be too far away.
View detail
A little expensive for the price of a Switch
I ordered this Switch, which was listed as Repair Parts for CORSA Corta, but it seems to be common with RCS and what I received was made by MARQUARDT as shown in the posted image.
I have no problem in normal use, but I am a little confused because the Switch that came with the CORSA Corta was made by OMRON.
The image of the other impresario is a Switch made by OMRON, so it is a mystery to me if there are different types of Switches with the same part number.
I was a little concerned that the position where the Switch switches is about 16.5mm from the back of the Switch in actual measurement, and maybe it's just our vehicle, but I thought the Brake was working so-so and the Stop-lamp would light up….
The reason why I was concerned about this is partly due to the lack of switch height adjustment, but also because when I linked the brake switch to the crucon switch, the stop-lamp did not light up even though the brake was applied to decelerate, and the crucon was not released, and the driver tried to accelerate. I thought that the Stop-lamp might not be on unless I apply it strongly.
Also, to avoid the above situation, I thought that Yamaha's cars with cruise control have two switches to deactivate the cruise control with disabled Stroke and Stop-lamp when Brake starts to work, but ….
I also thought that it would not be a problem if the Stop-lamp was turned on when I ran over Lever.
View detail
Fits: SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S
SEA BASSOEMKnuckle cover
Part Number:57300-29811-YU1
Purchased for SEA BASSDR200S (overseas MODEL), an Off car, just in case.
I thought that the Knuckle cover for Base's DF200 DJEBEL would be fine, but when I searched for OEM parts, I found that the cover was for the lever of the DR-Z400S system, so I took a chance and ordered this part number. As a result, it seemed to be the right choice, and it was installed without any discomfort.
Clutch Side Material:RubberDust cover removed, play adjustment range reduced.
*This is not an applicable model, so use at your own risk.
The search function was very helpful FOR JAPAN MODEL not yet released models.
I would like to continue to check and make sure I am not making a mistake.
View detail
Necessity for Handlebar replacement!
[How is it used?
Street Riding and Touring
I purchased this product because the OEMWire is no longer available due to the replacement of the Handlebar.
Used for FCR Carburetor Body.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Wire needs to be removed and adjusted. If you are familiar with maintenance, this will not be a problem.
How was your experience with it?
Accuracy and quality on par with OEM. The outer membrane is soft and easy to handle.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
None
Other items that would be helpful
important point
Please choose the corresponding Wire for your car model.
Opinions and requests to Manufacturer
I would like the length of the external membrane and Wire to be listed for each.
View detail
Safe.
Fitted with insurance in case of emergency! My sense of security has changed! View detail
I had it on my previous vehicle.
The brake lever has a rounded part so that it does not hurt the fingers. View detail
Looks Parenthesis better now.
After consulting with PartsShop, I was told that a hand guard and a Retractable Lever would be sufficient, so I decided on this instead of a Lever Guard.
It seems to shake with vibration, so it may be necessary to check the tightness.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Long!
Throttle Wire is not listed in the product description as OEM non +10cm, which I noticed after I bought it.
Note that a STD Handlebar or a Handlebar of similar height will have a Wire or excess of Wire, which will make the Parenthesis worse!
No problems with the texture and construction.
View detail
Diversion of 1000 to 650
As it turns out, it was not perfectly diverting.
To be precise, the Brake Side went on easily, but the Clutch Side did not.
You will need to create your own Bracket.
I chose it for its looks, but regretted it a little. OEMOption.
It also comes with a thick instruction manual, but it is almost useless. Therefore, there are some unusable parts left over.
View detail
Fits: HONDA CB250F, HONDA CBR250R, HONDA MSX125, HONDA GROM, HONDA Monkey125, HONDA NS-1, HONDA CBR400R, HONDA 400X, HONDA CB400F, HONDA CB250R
It is ◎ that it no longer hits the Small finger when gripping it.
Replaced with a Short Type one since I never grip with 4Finger.
It is ◎ that it no longer hits the Small finger when gripping it.
The replacement work itself was easy, but the Instruction Manual contains many descriptions of other car models, and it is difficult to understand, so I recommend watching Youtube or other media beforehand.
I'm also a little concerned about rattling compared to OEM.
View detail
unsuccessful
I will put up a picture.
Please confirm.
View detail
Different from what is currently attached
I'm not sure, but my Motorcycle's wire has a wire play adjustment on the handlebar side,
Product was on the other side.
It's a little hard to tell that the picture is an Image.
By the way, the Bracket part that is attached now is Black.
Do you know the conformity Wire?
View detail