Reviews
It is a rear face. It is fixed in the form where a clip is caught. Since a clip hits, it is necessary to remove a handlebar once for attachment. Since attachment took time and effort, three stars were used. A blue anodized is a beauty alth
It is a rear face.
It is fixed in the form where a clip is caught.
Since a clip hits, it is necessary to remove a handlebar once for attachment.
Since attachment took time and effort, three stars were used.
A blue anodized is a beauty although there is also a thing which blue likes.
I think that I will exchange for the occasion at the time of the grease up of a stainless together with the stainless nut of the company.
Since a price is also handy, they are good potted-plant parts.
View detail
Since normal was likely to go out, it exchanged. Although a grip feeling is very usually what, is it a point of No. 1 as a price is cheaper pure!? But the price of this is about hundreds of yen. However, since the color was red, the color of its o
Since normal was likely to go out, it exchanged.
Although a grip feeling is very usually what, is it a point of No. 1 as a price is cheaper pure!? But the price of this is about hundreds of yen.
However, since the color was red, the color of its own motorcycle was not matched but it has floated.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI D-TRACKER [D-Tracker].
It combined with the DRC easy adjust clutch lever, and purchased. Although I am in having used the hydraulic clutch, even if I change to this cable, I am using it comfortable especially. It was touch that influence became light rather than a pure
It combined with the DRC easy adjust clutch lever, and purchased.
Although I am in having used the hydraulic clutch, even if I change to this cable, I am using it comfortable especially.
It was touch that influence became light rather than a pure wire certainly.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 1100
It attached to SEFA 750. If the full stare of the handle of the thing which was able to acquire the good position with much trouble is carried out, idling will become high unusually. In spite of writing it as OK and being with the wire & hose of n
It attached to SEFA 750.
If the full stare of the handle of the thing which was able to acquire the good position with much trouble is carried out, idling will become high unusually.
In spite of writing it as OK and being with the wire & hose of normal.
It was NG when the handle was raised too much.
If it lowers, idling will also fall.
It is a standby in a moderate place.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX400
Clutch wire cable black is purchased. Since it was the completely same form as an original manufacturer's product, and a color, there was no unusual place in particular, but the motion became markedly good. Although it wavered with whether it will
Clutch wire cable black is purchased.
Since it was the completely same form as an original manufacturer's product, and a color, there was no unusual place in particular, but the motion became markedly good.
Although it wavered with whether it will be made a mesh, prices are three stars in .....
View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF750R, YAMAHA YZF750, YAMAHA YZF600R, YAMAHA YZF1000R, YAMAHA YZF1000, YAMAHA XJR400R, YAMAHA XJR1300SP, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJ400S, YAMAHA TZ250, YAMAHA TZ125, YAMAHA TRX850, YAMAHA TDM850, YAMAHA GTS1000, YAMAHA FZS600SN, YAMAHA FZS600S, YAMAHA FZR750, YAMAHA FZR400RR-SP
It purchased for the exchange from a pure black lever. There is a handy feeling at an original manufacturer's product and a price practically equal. The touch which is easier to grasp satisfactorily than an original manufacturer's product although
It purchased for the exchange from a pure black lever.
There is a handy feeling at an original manufacturer's product and a price practically equal.
The touch which is easier to grasp satisfactorily than an original manufacturer's product although it is some also carries out an adjuster.
View detail
A margin was seen and bought when exchanging for the condor handles of hurricane. It is obstructed especially satisfactorily.
A margin was seen and bought when exchanging for the condor handles of hurricane.
It is obstructed especially satisfactorily.
View detail
Fits: Others , SUZUKI GSX400, YAMAHA XJR400, HONDA CB400SF
Since excessive electric power did not need to be used when Wright was killed at the time of warmth when an old motorcycle and battery have weakened, it attached. Attachment is only the easy work which substitutes the coupler in a headlight. Since
Since excessive electric power did not need to be used when Wright was killed at the time of warmth when an old motorcycle and battery have weakened, it attached.
Attachment is only the easy work which substitutes the coupler in a headlight.
Since couplers increase in number, please take care, when you equip with HID etc. and there is not clearance sufficient in a headlight case.
the stay which turns on a switch for a handle, and the stay which can be attached to a favorite place with double-stick tape are attachments -- glad -- coming out -- the shin.
View detail
It is simultaneous attachment with a COMP handlebar and XC protector. Attachment was quite serious. Since it interfered in the holder of a brake master or a clutch lever, it also took time in work while change an angle, and attaching or changing m
It is simultaneous attachment with a COMP handlebar and XC protector.
Attachment was quite serious.
Since it interfered in the holder of a brake master or a clutch lever, it also took time in work while change an angle, and attaching or changing management of a hose and a wire.
If there is an optional long mount adapter, it may be able to attach a little more simply.
Since attachment was serious, it was considered as ***.
View detail
It attached to fixation of the sensor and LED indicator of ETC. The magic tape was used for fixation. Attachment was clamped at the handle brace shaft. A degree of freedom is in an angle and it can perform fine adjustment. I think that it
It attached to fixation of the sensor and LED indicator of ETC.
The magic tape was used for fixation.
Attachment was clamped at the handle brace shaft.
A degree of freedom is in an angle and it can perform fine adjustment.
I think that it can use also for fixation of digital meters.
Although it is functionally good, it is a finished surface, and there was dissatisfaction a little.
Although the clamp part did not have a problem, its alumite treatment of the stay part was not quite satisfactory.
I purchased Black.
View detail
The high throttle here is used for XR100 motard in the combination of yoshimura TM-MJN24. Rather than the thing of the kitaco which was being used before, an opening is large and can use it satisfactorily also in combination with a yoshimura carbureto
The high throttle here is used for XR100 motard in the combination of yoshimura TM-MJN24.
Rather than the thing of the kitaco which was being used before, an opening is large and can use it satisfactorily also in combination with a yoshimura carburetor.
Although the normal equivalent handle is used, since the cable is too long a little, it has remained.
In addition, it may become obstructive when the thing is variously attached to the handle by the handle of XR or APE without width, since the holder part is fairly large.
I had to transfer the extended kill switch.
View detail
The stingray which thinks the kana - it is better to exist once, and seldom limits an attachment vehicle type is purchased. Guard area is also pleased with it being large. Since a guard portion is that it cannot do up to a longitudinal direction,
The stingray which thinks the kana - it is better to exist once, and seldom limits an attachment vehicle type is purchased.
Guard area is also pleased with it being large.
Since a guard portion is that it cannot do up to a longitudinal direction, and a product made of resin although they can be made to be able to slide horizontally and can be adjusted, there is quite a many fear of insecurity in reinforcement.
Or [ that it was better to use the strong hand guard containing a core even when it will be expensive, if you buy it after all ].
.
.
.
Probably it is likely to stand and is likely to break into BAKITSU with a GOKE grade.
View detail
Since the switch which seems to be thin and seems to be easy-to-use was not otherwise able to be discovered -- It purchases in order to use it for a compulsive fan motor switch, since the water temperature of CBR1100XX becomes high immediately. Since
Since the switch which seems to be thin and seems to be easy-to-use was not otherwise able to be discovered -- It purchases in order to use it for a compulsive fan motor switch, since the water temperature of CBR1100XX becomes high immediately.
Since wiring is made to only interrupt in goods, there is no difficult thing.
It is things (;'竏?) that there is no space which will be hidden on the outskirts of a handle in Brava from a beauty supposing there is a problem.
View detail
It purchased to the monkeys (FI type). (It is confirmed [ that attachment in the G craft is possible ]) Unlike the photograph, the thing of gold attached the center nut. I thought whether since about 4 colors of mistake ?? center nuts have come ou
It purchased to the monkeys (FI type).
(It is confirmed [ that attachment in the G craft is possible ]) Unlike the photograph, the thing of gold attached the center nut.
I thought whether since about 4 colors of mistake ?? center nuts have come out as other goods, combining would also be pleasant.
I am the G craft's aluminum shaving, and feel that texture has fallen for silver anodized finishing compared with goods besides a thing, and since I felt that texture had not balanced a price, I was allowed to set evaluation to three.
View detail
It is often and bad pure. Don't you choose and carry out loss? Since it has painted, a feel is gentle. When carrying out lever exchange, they are parts which can carry out a recommend to the direction of if it exchanges at any rate ...
It is often and bad pure.
Don't you choose and carry out loss?
Since it has painted, a feel is gentle.
When carrying out lever exchange, they are parts which can carry out a recommend to the direction of if it exchanges at any rate ...
View detail
Fits: その他
Since the standard lever of the NISSIN master was too long for my vehicles, it purchased on them. In die length, although about 2 cm of tips of a lever are inside from the end of a grip, he likes that kind of one individually. Since the clearing w
Since the standard lever of the NISSIN master was too long for my vehicles, it purchased on them.
In die length, although about 2 cm of tips of a lever are inside from the end of a grip, he likes that kind of one individually.
Since the clearing work itself has only stopped with one bolt, it does not start with 5 minutes of a thing.
View detail
It is attachment at XANTHUS. Exclusive elegance was regarded as wiring processing of a general-purpose article being managed since it is high, and purchased. Although it becomes empty since it says or there is no object for xan, as for the goods h
It is attachment at XANTHUS.
Exclusive elegance was regarded as wiring processing of a general-purpose article being managed since it is high, and purchased.
Although it becomes empty since it says or there is no object for xan, as for the goods here, the coupler of connection (smile) is a scalpel type.
Since an authentic positive one having been a male and a connector omission substitute were not completed, wiring was cut and they connected.
It also considered returning pure once and made connection the plug.
Moreover, since XANTHUS was always lighting, the kiln of the relay is carried out and it was made ON-OFF [ + wiring by the side of LO beam ].
As goods, it is what may be conjointly made dramatically into the refreshing also with the high throttle.
Wiring processing requires a wiring diagram etc.
Since I thought it serious to do individually very much, it was referred to as *3.
View detail
It uses in combination with the ZETA armor handguard bend. Since it is smallish, it is appreciated that handling is not affected, but using midwinter, there are a little few protection-against-wind effects. It will be saved if there are a touring
It uses in combination with the ZETA armor handguard bend.
Since it is smallish, it is appreciated that handling is not affected, but using midwinter, there are a little few protection-against-wind effects.
It will be saved if there are a touring version and a visor as an option like ACHARUBISU.
View detail
It uses in combination with the ZETA armor handguard bend. Since it is smallish, it is appreciated that handling is not affected, but using midwinter, there are a little few protection-against-wind effects. It will be saved if there are a touring
It uses in combination with the ZETA armor handguard bend.
Since it is smallish, it is appreciated that handling is not affected, but using midwinter, there are a little few protection-against-wind effects.
It will be saved if there are a touring version and a visor as an option like ACHARUBISU.
View detail
Fits: その他
Since the tip of the lever jumped out from grip end to KSR when it was a lever of normal, it exchanged for the short lever. I think that the balance of die length is right just. I think that anyone can do it since exchange has only stopped with on
Since the tip of the lever jumped out from grip end to KSR when it was a lever of normal, it exchanged for the short lever.
I think that the balance of die length is right just.
I think that anyone can do it since exchange has only stopped with one bolt.
View detail