Reviews
Fits: HONDA CBR250RR, HONDA MONKEY125, HONDA CL500, HONDA CL250, HONDA GB350S, HONDA GB350, HONDA Super Cub C125, HONDA GROM, HONDA CB250R, HONDA MONKEY125, HONDA CB125R, HONDA CBR250R, HONDA CBR250RR, HONDA CBR250R, HONDA CB250F, HONDA CBR400R, HONDA CB250F, HONDA CB400F, HONDA CBR400R, HONDA 400X
Lever exchange is good.
I used to use the previous Active, but this one looks good with a rigid appearance and precision. View detail
Simple and beautiful Forme!
I was looking for a simple and slimmer clutch lever, and I found this one.
I prefer a little more Short lever, but I like the feel.
It feels less thick and the excellent butchering makes it feel lighter.
View detail
Dress-up rather than function!
High Solo, but I installed it to change the color and routing of ThrottleBody and Wire.
As for the installation, it was a little Large strange because I didn't know how to make detailed adjustments.
Result WireQuantity:I made a Layout with 2pcs to sandwich the Brake lever for a better look.
View detail
good-looking
The clutch lever was replaced for a certain reason, so this one was replaced as well. It looks good and looks high class. However, I feel the movement is heavier than the OEM lever. View detail
good-looking
The OEM lever was not bad looking and we were going to use it as it was, but when we pulled it inside the handlebar to install the USB power supply, the bent part of the lever hit the switch box and the clutch could not be cut off. The interference with the switch box was reduced a little and it looks more luxurious, but I think the operation is heavier than the OEM one. View detail
Fits: HONDA CB1100, HONDA VFR800X, HONDA VFR1200X, HONDA VFR800F, HONDA CB1100RS, HONDA CB1100EX, HONDA CBF1000F, HONDA CB1300SB, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SF SP
The grip width can now be fine-tuned.
It is a replacement from U-KANAYA lever as well as Brake lever.
I was able to adjust the grip to the best width after replacing it with STFLever, because it felt far away from my palm even after making the smallest adjustment with the previous Lever. At the same time, I replaced the Dust Boots of the Clutch Mask Cylinder because they were torn.
The feeling of use is closer to the Clutch connection when it is aligned with one's palm.
View detail
Fits: KAWASAKI ZX-4RR, KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI Z650RS
Rattling is Large size
It looks cool, but the rattling is LARGE and very annoying.
Also, the wire inserts are exposed and rain penetration is a concern.
It was disappointing for Z650RS.
View detail
I used it on my GPZ900R.
I bought this for High SoloWirefor replacement on my GPZ900R. I have been using StainlessBracket for a long time, but I bought StainlessBracket again because it is less likely to rust. The price is higher than before, so I give it 4 stars. View detail
Fits: HONDA X-ADV, HONDA NC750X, HONDA CBR650F, HONDA CBR650R, HONDA DN-01, HONDA NC750S, HONDA CB400SB, HONDA CB1300SF SP, HONDA VFR1200X, HONDA NM4-02, HONDA NM4-01, HONDA CB400SF, HONDA CBF1000F, HONDA CB650F, HONDA CB650R, HONDA VFR800F, HONDA VFR800X, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS
Fine-tuning is now possible.
The lever for adjusting the grip width of U-.KANAYA's billet lever had stuck and was no longer adjustable, so I replaced it with a Dial adjustable ActiveSTFLever. It is foldable, so there will be less damage in the event of a fall. The grip is also comfortable. The Neck is more expensive. It seems that you can buy one set of U-KANAYA Lever for about the same price. View detail
![Option Plastic Wire Bracket for High Throttle Kit [EVO2]](https://img.webike-cdn.net/catalogue/images/33257/1060364_1_TS.jpg)
It's a small plastic board.
Even though it is necessary and unavoidable, I feel that 1,500 yen is too much, no matter how much it costs. View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R1, YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-07, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-07, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA TRACER900
Yamaha is!
I purchased the YamahaOEM Product because it is not adjustable!
It is sometimes difficult to play in a traffic jam, etc., far away when the hand is small and normal.
The quality is perfect, but I don't like the engraving on the front.
View detail
Used for frando 7nb
[How is it used?
I used this service for frando 7nb.
Since the shape is identical to brembo, it could be used as is.
Was the one you received as per Image?
The color of Gold was a little strong, but it was not a problem.
Was the installation difficult?
A Pin to pull out the existing Knob was also included and was easy.
Need something to hit, such as Hammer
How was your experience with it?
Beta pin was loose and rattled a bit, so will replace it with a pin I have on hand.
[Included Parts:were they on?
Perfect with Pin to pull out included.
[Was there anything that disappointed you?
The rattles are a little bit large and might be a problem for some.
However, I am using it for frando 7nb, so maybe it is different when used for GALE SPEED or brembo.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
None in particular
View detail
Fits: KAWASAKI Ninja250R, KAWASAKI Ninja250SL, KAWASAKI Ninja250, KAWASAKI NINJA250, KAWASAKI NINJA400
Clutch lever not handled!
The position of the brake lever can be adjusted, which is an advantage.
I have no problem with the product, but it is a pity that Webig does not sell the clutch lever. I think it is standard to exchange both of them, so I think it is necessary to sell them.
View detail
![Exclusive High Throttle Kit for Vehicle [EVO 2]](https://img.webike-cdn.net/catalogue/images/101096/evo2_85_TS.jpg)
Reduced wrist fatigue.
The cramped feeling when opening the Axel at the exit of Corner was greatly reduced, and furthermore, I did not have to twist my wrists so much when driving on the highway, which greatly reduced my fatigue. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3
Old-fashioned Stitch Box
Installed on a '23 YZF-R25 for High Solo conversion.
Image is an old-fashioned The Switch. Looks just like the picture, no complaints.
However, in the image there are 3 Couplers, but the one is 10 PinConnector 1 Brake switch terminal Quantity:It is 2pc
The 15-18 year old item (item no. 1383404) has one 8 PinConnector and Brake switch terminalQuantity as shown in the picture.:It is 2pc
Different model year cannot be installed.
As long as the model year is correct, it can be easily installed. The connector seems to have been changed after 19 years, so it should be fine if you just pay attention to that.
It is shorter than the OEM Wiring length, but seems to be easy to maneuver.
It's a pain in the ass there, because you have to shift the Tank to get to the Connector section.
Since the OEM switch kit is integrated with the throttle holder, it is more likely to be replaced at the same time, so I personally recommend that you ask a store to replace the switch kit.
For those who are used to replacing plugs and AirFilter on a regular basis, simply replacing the switch kit is a simple matter.
Except when touching Throttle related items such as High Solo change.
I had one complaint with this product, and I was personally dissatisfied with the lack of waterproof measures in the Connector section.
I would have had to bring the transparent cover that comes with the OEM Connector or get another cover, so if you had added a cover, I would not have complained.
View detail
Throttle response is perfect!
Purchase EVO2RepairWire to replace deteriorated Wire on V-MAX1200FCR Carburetor Body
I had originally installed EVO's Wire.
Choice of same
Type1-3 are lined up for V-MAX.
EVO2 does not have a setting, so RepairWire must be modified to be installed.
V-MAX's FCR Carburetor Body is Quantity in two ways from one Wire to carburetor:It is divided into 2pcs.
We need to make a thailandoko to connect to the two-way side.
It takes a little DIY skill.
It was worth doing.
Throttle response has been improved
It feels good.
View detail
![Universal Throttle Kit [TYPE-3]](https://img.webike-cdn.net/catalogue/images/38974/T3-2_TS.jpg)
So bad
Wire adjustment screw on handlebar side of 1 pc out of 2 is not tightened from the beginning.
When I tried to remove the protective cover of the middle wire adjustment, the Outer Crimp on the adjustment bracket fell out.
It's a shame because I have been using Active's High Solo for a long time on another motorcycle and I trust it.
View detail
![Universal Throttle Kit [TYPE-3]](https://img.webike-cdn.net/catalogue/images/38974/T3-1_TS.jpg)
Simple and easy to use Throttle kit
[How is it used?
The Separate handle forced us to change the switches, so we introduced the Throttle kit.
Was the one you received as per Image?
I am satisfied with the quality, Anodized's Throttle case is easy to scratch….
Was the installation difficult?
It is not particularly difficult, and if you are a good custom player, it is easy. However, the carburetor side of the Throttle Wire is difficult.
How was your experience with it?
It is a regular Throttle so it is no different than OEM. No resistance and I am normally satisfied.
[Included Parts:were they on?
It is possible to install the kit alone, but the length of the Throttle Wire may need to be replaced or considered for crawling in some cases.
[Was there anything that disappointed you?
Case is easily scratched, Bolt rusts easily.
I would have preferred High Solo if I was going to go through the trouble of replacing it.
View detail
Fits: HONDA CB1300SF SP, HONDA REBEL1100, HONDA CB1300SF, HONDA CB1300SB SP, HONDA CB1300SB
unbreakable
It is hard to break even if it falls over. Even if it breaks, there is a spare at an affordable price. View detail
![[Repair Parts]STFBrake leverSingle Item](https://img.webike-cdn.net/catalogue/images/63097/AC_STF-brake_lever-BLU_TS.jpg)
No worries about breakage
Even if it falls over and breaks, having a spare is a big relief. I think the price is reasonable. View detail