Reviews
Fits: HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250 S Edition
Fast delivery. Accurate product
About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing배송이 빠르고 상품이 정확합니다 View detail
Refreshing with this
I bought this for Refreshing around the Handlebar since I have Separate handle.
It says that the OEM MeterStar interferes with the headlight bracket, but I was able to install it without any problem once I removed the headlight bracket.
It is GOOD to be able to use Handlebar Lock!
View detail
It is smaller than the original switches of many motorcycles. View detail
Best in cost performance! No hassle with pontoons!
The USB power supply allows for hassle-free installation.
It requires no complicated work and is warmer on top of that.
It is so hot with bare hands.
Switch is graceful, eliminating all adjustment functions with just ON/OFF.
In fact, I have never felt hindered by it.
Above all, it is inexpensive. It was a good choice.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 100, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 50
The long-awaited push cancellation type blinker switch!
It was installed on a DUCATI 900 M.H.R.
Since it is not a "one-piece-fits-all" installation, we left everything from product selection to installation to Motorcycle Shop.
Originally a Slide type OEMBlinker switch, the convenience of the Push cancellation type is still obvious.
Since the vehicle had been customized from the time of purchase, there was no need to be concerned about originality, and parts were changed to give priority to comfort.
Use it on the way home from Motorcycle shop. I knew this was the one." I was constantly thinking, "What is this?
View detail
Fits: HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250 S Edition
I'm satisfied
I received the item in good condition and installed it myself... Installing the riser itself wasn't difficult, but other than a delay because I didn't know how to unplug the headlight outlet, I installed it without problems. I was confused because the clutch line was a little tight, but after pulling it left and right a few times, it seemed like there wouldn't be much of a problem... The driving position isn't perfect, but I'm very satisfied with it compared to the original, and wouldn't it be perfect if it came just 3cm closer to the body... .I guess I was greedy and hesitated on whether to install the handle riser or not, so I installed it, but I think this is an option that I absolutely have to install. I am completely satisfied. View detail
Fits: HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250 S Edition
Good goods
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
It really gets thinner every year.
This is the first time I have installed it on a vehicle I own.
Grip heater was often installed on other people's cars, but I didn't want to make the grips too thick for my own car, and I don't ride that much in the winter.
(I know it would definitely be useful to have it on originally.)
As a prerequisite, this time we installed the D-UNIT through the D-UNIT. Therefore, after connecting the right and left grips with couplers, we did not use the supplied wiring with fuse, but managed the fuse on the D-UNIT side. The D-UNIT makes wiring very easy, as only the minimum amount of wiring is required to crawl along the frame.
Honda's Sport/Grip Heater is a well-known product that not only has thin grips and does not spoil operability, but also has a finely researched heat distribution on the grips, etc. It is a wonderful product, but when used on a custom vehicle such as mine, it has the problem that the size of the throttle pipe cannot be freely selected, so it is not an option for me personally. However, when using it on a custom vehicle like mine, there is a problem of not being able to freely select the size of the throttle pipe.
Therefore, Active's Throttle pipe and Quantity:We are using it with Set, but you should have no trouble inserting it if you are using it with Active's Throttle pipe. If you are not using it, you should purchase Active's Throttle pipe with it.
I've read in other people's impressions that they could not install the pipe and broke it, but I think it is better to think that OEM throttle pipes that are installed by shaving the ribs cannot be installed in the first place.
The point is that the pipe could not be inserted because of the unevenness left on the throttle pipe. I think it is extremely difficult for an amateur to make a flat rib without a lathe, etc., and I think this product cannot be inserted if the Level is cutter cut visually.
As for operability, a separate controller used to be necessary around the handlebar, but the controller has been made smaller than Honda's Sport/Grip Heater and integrated into the LeftGrip. This Small Type is amazing.
The Honda Sport/Grip Heater is probably a bit thinner in diameter (probably less than 1mm at the time of installation), but I evaluated the embeddedness of the Small TypeSwitch and decided to introduce the DAYTONA product.
The diameter of the YOSHIMURA Grip that was originally installed was about 31.4mm in actual measurement, but this product was 32.2mm in actual measurement when it was installed on the Handlebar. Of course, YOSHIMURA's Grip is not brand-new. Of course, there are other grips with thinner diameter than YOSHIMURA's grips, but this figure should not be a problem in practical use, unless you are a type of person who is very particular about thin grips.
(Yamaha's TZ Grip, for example, is supposed to be thinner than this, but I don't think anyone who uses a TZ Grip anymore is in Situation, where the vehicle itself is related to the Grip heater in the first place).
View detail
Small and nice.
This was helpful because installation Space was limited. View detail
Fits: HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250 S Edition
Purchased to install on a 20-year-old Level 500^
It's worth the money too. Materials, packaging, and quality that are incomparable to Alibal.
Specifications 15mm back, 10mm up
When installing, there is no problem with all cables including the brake cable.
Instructions are also included, and the order of loosening the bolts, the order of tightening, and the bolt torque are also marked. -------------------------------------------------- -------- After all, it costs money. Materials, packaging, and quality that are not comparable to Alibal. 15mm back, 10mm up When installation, the brake cable, including the cable, does not interfere. There is also a manual, and the bolt is solved, the ordering order, and the bolt torque are also marked. Powered by Google Translator
View detail
ปะกับคันเร่ง daytona มาครบชุดพร้อมใช้งานโอเคดีครับ เลื่อนไหล ก็สมราคาอยู่ครับ ไม่แพงใครมองหาปะกับแท้ราคาไม่แพง View detail
Nice looking and easy to install, easy to use
I installed on my Suzuki V-strom 1000, it take up little space on the handlebar, It look very nice and easy to install, easy to use, I love it. View detail
Recommendation if you don't care about appearance
Used on a commuter scooter.
The Handlebar Cover is only there, but it can prevent the fingertip from feeling the temperature....
I was concerned that the cord of this type of Grip heater would be quickly damaged by frequent opening and closing of the Axel, but this product seems to be quite sturdily built and there seems to be no need to worry about that.
View detail
Installed on TT-R125LWE!
We did not want to change the position of the clutch lever.
We chose this product with a narrow width.
View detail
DAYTONA UniversalSilencer Switch
ADDRESS V100 is converted to Pipe Handlebar and a new Left SideSwitch Box is required and purchased.
Horn, Headlight Hi and Low, and Blinker Quantity:Pair (for Left and Right) Switch is integrated.
Blinker switch is a Type not Push cancellation. Once you get used to it, there is no problem.
Usage of each Switch (Feel when you press Switch). was also moderately resistant and not too uncomfortable.
Although it is necessary to make sure that the Wiring connection is correct, it is a safe and reliable product, as is typical of DAYTONA products.
View detail
Fits: HONDA NSR50, HONDA NS-1, HONDA NSR80
Very good
It may be tough in Circuit if you don't play less View detail
It's great!
So easy to install!
The LED light is so strong that it is dazzling.
Now you can have more fun touring in the middle of winter!
View detail
Wiring for the first time
What made you decide to buy?
Wiring is mainly to prevent parts from falling out. Oil Filler CapSecurity is reinforced this time, the Oil Filler Cap of Motorcycle is bare and can be easily loosened by hand except for its special construction. If it is pranked or … stolen on the road, … that's why I bought it.
[How did you like it when you used it?
The wire used for wiring seems to be basically Stainless Steel Wire.:Pro safety wire is a soft stainless steel wire packed in a compact resin case. The wire size is 0.6mm. I was concentrating on my work, and when I realized, my hand was bleeding. Also, be careful not to scratch the area around the installation. Also, be careful not to scratch the area around the installation. I installed this wire ring for the first time, but I twisted it too much, and it got shredded in the middle, … the twisting position did not work, … I failed many times, but the contents are 25m long, so you don't have to worry even if you make a mistake. With the current construction, it will be years before the Wire is gone.
View detail
ประทับใจมากครับสินค้าคุณภาพดีครับราคามิตรภาพ View detail
I'm ready for winter!
I bought it after watching other User's videos.
I have not installed it yet, but will do so as soon as possible in preparation for winter.
I can adjust the temperature with ease using Left Thumb Touch, so that's good!
View detail