Reviews
Super lightweight bar ends!
If you want to reduce your bike's weight then this bar ends from CF POSH are the best! They weight just an amazing 17 grams for the pair! The quality and price are also very good. Definitely a good buy! View detail
Simple and lightweight bar ends for a street or racing bike
These bar ends from CF POSH have a metal insert that makes them a little heavier than their other model without the insert, but on the plus side these do dampen a little more the vibrations on the handlebar. A good option if you want to reduce your bike's weight. They weight just 42 grams for the pair! The quality is also very good for the price. View detail
Fits: HONDA little cub, HONDA SuperCUB [Super Cub]., HONDA little cub, HONDA SuperCUB [Super Cub].
Not just looks, but functionality.
Made by Posh Cub Type/Mini Keg Grip is 。 I chose Black because Black is a safe color. 。
I chose it because it looks good on the CUB and because of the wide variety of colors available.
I want to change the Grip and make it my own. Various Design's are on the market.
However, the size of the handlebar is different for each car model, so if the size does not match, the Large size will change.
By the way, what is the size of the Handlebar Grip of the CUB?
* Dedicated to genuine handleGrip total length for HONDA CUBSeries vehicles:112mm 。 Grip I.D.:Quantity:Pair (for Left and Right) Co 24mm.
Grip replacement procedure
(1) Cut the old grip with Scissors First, you must remove the old grip to begin. 。 Various ways to remove Grip 。 There are various ways to remove it depending on the condition of the person and the motorcycle, such as cutting it vigorously with a cutter knife or injecting silicon spray and pulling it out as hard as you can. 。 This time, I didn't have a cutter on hand, and I was planning to dispose of the old grips, so I used a kitchen scissors to make the incision.
↓
(2) Remove the previous adhesive, etc. that adhered to the surface and clean it up.
↓
Next, we will install the new grips. 。 For this grips, it was easy to lubricate the new grips with silicon spray and push them into place. Generally, when installing new grips, it is often necessary to wet the handlebar with parts cleaner instead of lubricant before pushing the grips into the handlebar. 。 However, the dimensions of the grips are quite tight, so even if the silicon spray is used to fit the grips, the grips will not rotate after installation. 。
come
Effect after replacement
◎Grip's moderate elasticity is good.
◎ Grip is thick-walled and Barrel-shaped, making it easy to hold.
◎Less vibration on the hand than OEM. Less fatigue even over long distances.
◎The Fold is attached so it is not slippery.
◎The look of the car becomes old car feeling, and I like it (laugh)
Since the ▲Grip is Large, the Throttle opening degree is Large, so a little caution is required.
Personally, I like the comfort of the grip, and since the grip is a key element in motorcycle driving, I chose the barrel shape because it seemed like a good choice, mainly because it would reduce fatigue. 。 When we actually put it on, as expected, we found it easy to grip and the folds prevent it from slipping.
Barrel Type Grip is stylish in appearance. 。 For those CUB owners who are using worn-out Grips, we suggest replacing them, as they are quite inexpensive.
View detail
Difficulty in quality and inspection system
I returned the item because I received an item that was doubtful to be new.
Below is the contact information from Support.
We have reviewed the images you provided. 。 The condition you described is probably due to stain from the mold release agent used during the molding process. 。 Unfortunately, this degree occurs in almost all of them. 。 I think it would be possible to clean it with a neutral detergent, etc. to clean it to some extent, but if you request something that has nothing like it, I'm afraid I cannot respond to your request. 。 If you are not satisfied with the quality, we will be happy to accept your return."
“The answer was that it occurs in almost all of them” but at least it wasn't in the ones I have purchased in the past.
It may be hit or miss.
It might be better to check and buy in a real store since it is a place that is always touched and seen.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 50, HONDA APE 100, HONDA Live DIO Series, HONDA MONKEY, HONDA MONKEY, HONDA XR50 MOTARD, HONDA XR100MOTARD
CF POSH Flat Face Throttle Cone
I searched to replace the throttle grip of my genuine Ape 100 Type D, and unfortunately, only CF POSH products were in stock. Because it is an old model, after-parts are in short supply. I went down to the parking lot to replace the throttle grip and replaced the grip. This is a very easy replacement. You only need to loosen one screw bolt. As a user, there is little difference between the genuine product and CF POSH's 15% quick grip. -------------------------------------------------- -------- I searched to replace my genuine 100 type D throttle grip, and unfortunately there was only CF POSH product. It is an old model, so there is a lack of inventory of the after parts. I went down to the parking lot and replaced the grip to replace the throttle grip. Very easy replacement work. Only one screw bolt is solved. The 15%Quick Grip of the genuine product and the CF POSH is inadequate to feel the changed part as a user. Powered by Google Translator View detail
Fits: YAMAHA TZR50, KAWASAKI ZEPHYR750, HONDA NSR50, HONDA NS-1, HONDA CB400SF, KAWASAKI ZEPHYR400, YAMAHA XJR400, YAMAHA RZ50, HONDA NSR250
One point custom
Purchased for One point custom color insert on the body of the car.
Each color is available so you can match it to your taste.
Clutch adjustment is easier because the rotating part is easier to turn.
View detail
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
Gold's Clutch adjusterZ125pro
The Bolt is a little longer than OEM, but it came on with no problem at all. If you are considering this, please do so at your own risk.
[How is it used? Town ride
Was the one you received as per Image? Yes.
Was the installation difficult? Easy if you can lubricate the Clutch Wire
How was your experience with it? I think it has quite a dress-up effect.
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Other items that would be helpful
Just work together when lubricating the installation points and hang/clutch wires.
Availability and clarity of Instruction Manual/A piece of paper is included, but it is a reminder to have it properly installed by a skilled contractor. This is fine, since the person who intends to install such a component does not need instructions for installation or use.
Notes/Nothing in particular.
Items to buy together/None in particular
Opinions and requests for Manufacturer/Good enough product.
View detail
I kind of bought it because of its face white shape.
[How is it used?
I had been restoring the LITTLE CUB that was given to me by hanghang for half a year, and when the restoration was over, I wanted to start working on custom and dress-up pedals. I wanted to match the color of the Grip with the color of the Footpeg Rubber and the Rubber of the Kick pedal. If it's a LITTLE CUB, it's a Barrel Style Grip! I bought it with a middle-aged stereotype.
How was your experience with it?
at the same time Wrap-around Grip heater." I plan to install the Mini Keg Grip at a time when I will no longer be using the Grip heater (around March) because I have purchased a new Grip heater.
When I took this product out of the box and wrapped it around the above Grip heater...I gave up on installing it this winter because it is hard to grip when I wrapped the Heater around the Mini Keg GripSingle Body because it is thicker than the Grip.
My impression after holding it with Single Body is It's thicker, but just the right thickness to make it easy to grip." I felt that."
How did it compare to other products?
The shape of the Grip is "Barrel-shaped." Therefore, it is difficult to compare it with the Grip of the normal design, but the grip of the GripCenter is thick, so if you can't handle it, it is a very bad Grip.
If this Grip was installed on a SUPER SPORTS750 series or a big bike, I would be inclined to silently replace it, but I wonder if it would be good for a LITTLE CUB. I think it's a good idea for a LITTLE CUB.
[Points to note]
The unique shape and colorful color variations.
Other items that would be helpful
The deciding factor in the purchase
The reason for this was the lineup of brown colors that matched the footpeg and kick pedal, and the reasonable price.
I was not sure about the Brown Grip because HondaOEM Product also had a Brown Grip, but I was intrigued by the barrel-shaped design. If I can't eat the discomfort after using it, I may replace it with OEM Grip Brown.
【Included Parts:presence or absence】.
Quantity:Pair (for Left and Right) Grip of 1Quantity:Only Set is included.
[ITEMS TO BUY TOGETHER
I don't think there is anything special to buy since GripSingle Body is the only thing that works, but I'm aiming for 3,000 yen to get free shipping, so I'll buy Mirror and Footpeg Rubber (when you buy a used CUB, the footpeg rubber on either side of Large may have holes from falls or other causes. I'd like to buy Mirror or Footpeg Rubber (when you buy a used CUB, you may find that one of the large Footpeg Rubber has been penetrated by a fall or something). Small Things That Concern Me. It is also a good idea to select consumables (brake shoes, engine oil, etc.) that you will eventually need.
Opinions and requests to Manufacturer.
The grips of old CUBs are unique, so there are not many products that are compatible with them.
View detail
difficult to install
It was difficult to install and tore during installation. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Outside Grip (Pierced Type) Convenient for installation of
Outside Grip (Pierced Type) It took a little time to fit the Accelerator Wire thailand core when replacing the throttle cone. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Amazing Top Bridge Dress Up Bolts
The quality is amazing with a great polished nickel look. I've included a photo for comparison. The supplied bolt is slightly longer and the countsunk has a larger surface area, I feel as though it's much stronger now. Would recommmend buying with polished top plate for a great look. Installation was extremely easy, I believe anyone can do it. Shipping was super fast from webike, always happy thank you webike! View detail
Mirror Holder is no longer available.
[How is it used?
I bought a used WR250R before the price went up as much as it has now, and it had a ZETA Pivot Clutch Perch CP installed at first, but the Mirror was only installed on the Right Side, so I had to replace it with a ZETA Pivot Clutch Perch CP. Is it legal to use a LargeMirror without LeftMirror, or is it scary when changing lanes?" I looked closely around the clutch and found that the ZETA clutch holder does not have a screw hole for mounting Mirror!
The OEM clutch holder of the WR250R has an integrated Mirror Holder, so when it was replaced with a ZETA one, the Left Mirror could no longer be installed.
I ordered this product as soon as possible to avoid danger, as my driving skills and ability to perceive danger are not very good.
Did you receive the item as per the Image?
I ordered the product after thoroughly checking Webike's product description section, and it was exactly as I had imagined it to be.
Was it difficult to install?
BoltQuantity this product to the space in the root river of the Clutch holder attached to the Handlebar.:It is a simple job to attach with 2pcs.
Quantity:Pair (for Left and Right) If the Mirror mounting spacing of the two mirrors can be installed at the same location, there will be less discomfort when the Motorcycle is viewed from the front.
How did you like it?
Once firmly installed, the Mirror Holder is a normal Mirror Holder without any Mirror gaps while driving.
When I purchased it from Webike, it was on sale at Timing, so I was able to purchase it at a lower price than OEM holders for other vehicles.
Was "Included Parts:" attached?
BoltQuantity for HolderBody and mounting:2pcs are included in the package.
Were there any disappointments?
I purchased a Blue alumite product and it faded faster than other Anodized dyed products.
I am thinking of painting it matte black with a cheap can of Spray if the color fades any further.
Other items that would be helpful
Point and hang of installation
As I mentioned above, I think it would be less uncomfortable when viewed from the front in Symmetry if the Holder is mounted at the same spacing as the Mirror position on the Brake Side.
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...sorry my memory is a bit hazy as I purchased it quite a while ago.
[Notes]
There is nothing special in terms of functionality, but Blue alumite fades quickly, so I think it would be safer to purchase Black.
[ITEMS TO BUY TOGETHER
This is an opportunity to use your favorite MirrorQuantity:Pair (for Left and Right) I wonder if it would be customary to purchase a "Custom"?
[Opinions and requests to Manufacturer
The color fades quickly, so I would like you to take measures to prevent this, and I would like you to continue selling this product for as long as possible.
View detail
It looks very nice
As the product photo shown, the grip is very classic and comfortable. Its look is quite similer with Bitwell Kongfu grip. View detail
Buy with brake lever set change
The finish looks good and I'm satisfied with the design I want Recommended as a mirror hole replacement when changing the genuine front brake set View detail
easy manual cruise control
I have used many type of throttle assist but most of them are not fixed when I turn the throttle on a long journey, especially when it rains. I installed CF Posh throttle assist on Suzuki V-strom 1000 (and now on Ducati SF), it can fasten to the throttle grip so I feel very comfortable during long journeys. View detail
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
Easier to adjust.
I bought it because I thought it would be easier to adjust by making the Screw part larger.
Satisfied with the results, as they are easier to adjust.
View detail
I choose Racing grip.
For many years, only the open end was available, but in recent years, only the short type is now available with a closed end to match the Scooter and other models.
I feel most comfortable with this racing grip.
In Circuit driving, it is very easy to operate and use from SmallEngine Displacement Volume to LargeEngine Displacement Volume.
I think it is not tiring and universal for both city driving and touring.
I guess the drawback is that the Design is a bit old-fashioned.
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 90, HONDA little cub, HONDA little cub
There's no substitute for this.
When I went touring, the CUB had a low throttle, so I had to re-grip it in many situations, which was a hassle.
After replacing it with this one, you can perform accelerator operation just like a normal motorcycle.
I was licking my chops! I should have changed it earlier.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
แฮนด์ตัวนี้ราคาไม่แพงครับ น่าใจ View detail
Fits: HONDA little cub, HONDA SuperCUB [Super Cub]., HONDA little cub, HONDA SuperCUB [Super Cub].
It fit better than I thought it would.
The grip felt more comfortable than I had imagined.
Installation went more easily than I expected. It went on more easily than I expected.
If I`m not using Air compressor or Cleaner system, should I have used Grip military hands?
In terms of time, it takes about 10 minutes for both.
However, because he worked with his bare hands, the skin on his hands was torn in two places.
Also, the Accelerator Wire broke when I plugged in the Axel side ….
It may have deteriorated considerably, so it was time to replace it and reopen it.
Recommendation:Stop forcibly working on the Accelerator Wire and remove it.
In case you are wondering, we used a special adhesive.
View detail