Reviews
Fits: YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6N, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
Great
great replacement fits my boom 250cc, you should tottaly get it if u ever break ur brake lever, great item give it a 5 star review View detail
Fits: HONDA MBX50, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NSR50, HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA NSR80, HONDA NSR80, HONDA NSR80, HONDA Z50 JRJ-2 AB22, HONDA Z50 JRH AB22, HONDA MBX50, HONDA MBX50, HONDA MAGNA50
Might have a rattle.
The Master Cylinder is OEM for the first half of the NSR50, but I am concerned about rattling when installed.
However, since OEMLever is not originally available, no comparison can be made.
View detail
![[1 Set of 2pcs.] Oval Mirror 10mm Small](https://img.webike-cdn.net/catalogue/14155/101-041_TS.jpg)
We chose the Small Type to match the Handlebar.
I used to use the so-called Z2Mirror Bracket Type, but it was old and the rust was noticeable, so I replaced it with the Small Type. The small type is a little harder to see. View detail
![[Set Of 2] Round Mirror For Cub](https://img.webike-cdn.net/catalogue/14155/101-019_TS.jpg)
Fits: HONDA MONKEY, HONDA CUB90, HONDA DIO
Wound on Mirror part
Both have SmallWound in the Mirror section, which is unfortunate. View detail
Fits: HONDA ZOOMER(Ruckus), HONDA CUB etc., HONDA LIVE DIO, HONDA SMART DIO, HONDA TACT, HONDA MONKEY
not adjustable
quality is fine but mirror is not adjustable and is fixed on the stalk. packaged well and will look cool but not sure I'll be able to see out of them. View detail
![Normal Thread Screw Universal 8mm [1 Set of 2pcs.] Rear Mirror Oval HONDA Right 1 Set of 2pcs.](https://img.webike-cdn.net/catalogue/14155/101-003_TS.jpg)
Fits: HONDA ZOOMER(Ruckus), HONDA DIO, HONDA LIVE DIO, HONDA SMART DIO, HONDA TACT
Two right-hand threads with a screw diameter of 6?
The wrong one is bad, but it's all Right, two Quantities.:Set came in.Quantity:Pair (for Left and Right) The screw diameter was 6.0mm, not 8.0mm. Also, the screw diameter was 6", not 8". In the end, I could not use it at all.
Since it was not that expensive to begin with, I decided not to return it and Garbage it, considering the return shipping costs and the hassle of dealing with them.
I would like it to be easier to understand and not to make mistakes, like Right× number of books if someone wants only Right.
It is understandable if it is an indication. 2 Quantities of all Right.:Set is incomprehensible, Mirror is also smaller than existing ones.
View detail
![Normal Thread Screw Universal 8mm [1 Set Of 2pcs.] Rear Mirror Oval HONDA L/R Set](https://img.webike-cdn.net/catalogue/14155/101-001_TS.jpg)
Fits: HONDA TACT, HONDA DIO, HONDA LIVE DIO, HONDA SMART DIO, HONDA ZOOMER
You can use it.
Installed on SPACY100.
I replaced the one that was on before because it was getting hard to see due to vibration.
The bracket is a bit long, but it is very easy to see and comes with a Rubber Cover to cover the Screws.
Two pieces Quantity:I am satisfied with this price for the set.
View detail
Used in xlr250
The Lever was broken so I replaced it.
It is a little shorter than OEM.
Quantity:Pair (for Left and Right) It is good that it is
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZR-7/S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R
Excellent in costa
Used for ESTRELLA as for Repair
Unlike OEM, there is a little wobble, but it is cheap and easy to supplement.
The appearance is almost the same as OEM, and I am satisfied with the excellent cost performance for Repair.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA TY250 S, YAMAHA TY250 S, YAMAHA TY250 R, YAMAHA TW200 E, YAMAHA TW200
As Spare.
OEM compatible product.
I got carried away and broke my lever while running Dirt, so I replaced it. Just replace the existing lever.
The accuracy is a bit poor.
It works fine, but I feel like the screw holes are gapping…
good point
We can get it faster than OEM.
The installation itself is easy.
The quality of aluminum is not bad.
Brake operation is the same as OEM.
A bad point
The screw holes are slightly gapped.
I'm a little short of taking BALI.
If you look at the accuracy and other details, there is no Drill, but it is totally perfect for everyday use and is Large sturdy.
It is often difficult to get OEM parts for TWs and other models because they are out of print.
Recommendation, as it is relatively easy to obtain.
View detail
![[1 Set Of 2pcs.] Off-Road Vehicle For Mirror 10mm Standard Screw](https://img.webike-cdn.net/catalogue/14155/101-032_TS.jpg)
Fits: Others
ALBA Off Car Mirror
Mirror blur while driving is so bad that you can't see HADRILL.
It's acceptable, if you think about it in terms of Cost.
View detail
![For Beano [Set Of 2] Rearview Mirror](https://global.webike-cdn.net/photo/impression/74/74b7b7e287b7c1007a0d7220d58091b4L.jpg)
Fits: YAMAHA VINO [Vino]., YAMAHA VINO [Vino].
Back Mirror for ALBA VINO
VINO is active in the anime? Because it was
"Oh? A round Back Mirror would be nice too."
And
The price isn't that high either.
result
It looks good.
It looks good on the round APRIO
I think
View detail
![[Set Of 2] Round Mirror For Dio](https://img.webike-cdn.net/catalogue/14155/101-018_TS.jpg)
Fits: HONDA DIO [Dio]., HONDA CUB [Cub]., HONDA monkey, HONDA DIO [Dio]., HONDA CUB [Cub]., HONDA monkey
Cospa is nice
I've been using it with SUPER CUBSTD without any discomfort although it's labeled for DIO. View detail
Fits: HONDA CB400FOUR (water-cooled), HONDA CB400FOUR (water-cooled), HONDA CB400FOUR (water-cooled), HONDA VF750 MAGNA, HONDA VF750 MAGNA, HONDA VF750 MAGNA, HONDA VTR250, HONDA VTR250, HONDA NV400, HONDA NV400, HONDA NV400, HONDA NV400, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA GB250 CLUBMAN, HONDA CBR750, HONDA CBR750, HONDA CBR400F
top quality
This item is identical to the original o.e.m. one(s) fitted to my 2001 Honda CB250F. I broke the right hand lever. Couldn't find part under aforementioned model number, but traced it via Honda "Jade" which has many similarities. View detail
![[Set Of 2] Square Mirror For Cub](https://img.webike-cdn.net/catalogue/14155/101-020_TS.jpg)
Fits: HONDA DIO [Dio]., HONDA CUB [Cub]., HONDA monkey, HONDA DIO [Dio]., HONDA CUB [Cub]., HONDA monkey
It was quick
Thank you It was the product I was expecting I am going to install it and make it a CoolCUB Thank you for your continued support View detail
OEM same etc.
Used for KSR2
There's no particular adjustment feature, and it's cheaper than the OEMs
I bought it Accuracy, etc., would be the same as OEM
It's not particularly surprisingly good or bad
Cosmo
View detail
Fits: Others
It was a plane mirror
I should have checked ・ The Mirror was a flat mirror, I tried to install it but it was removed on the spot I did “plane mirror”I can't do it myself! I think it's a good product for people who are fine with flat mirrors, no problem at all View detail
Fits: HONDA ZOOMER(Ruckus), HONDA CUB etc., HONDA LIVE DIO, HONDA SMART DIO, HONDA TACT, HONDA MONKEY
Just need this style
As a female man who loves motorcycles, fancy variety is a must! ~ The style of this scissors hand is still the blue I like. It is installed on my monkey, and it can be changed to the wild. I hope that the manufacturer can produce two versions of "rock" and "cloth", as well as a metal rod. It would be better if the body had a black one. As a female man who loves motorcycles, fancy change is a must! ~ This scissors hand style is still my favorite blue, installed on my monkey, you can change the style to wild, is to hope that manufacturers can produce a "stone" and "cloth" two versions, there is a metal rod If the body is black, it is better.(translated by Google Translator) View detail
Fits: YAMAHA XJR1300
Spare parts but it is not completely compatible
OEM PartsLever Quantity at one price : Pair (for Left and Right) Quantity of : Since Set can be purchased, Cost performance can be said to be excellent. However, for Brake lever it is more fundamental than Adjustable, Parts on Master Cylinder side is Quantity : It is not set. It is only Lever division. View detail
Fits: YAMAHA XJR1300
OEM Standard substitute item
XJR1300 / It is equipped with RP 03J.
Color BALI We also attracted abundant Foldable,
It compromises there for the convenience of the price..
Although it was decided to buy unavoidably from falling damage,
Quantity : Pair (for Left and Right) If it is inexpensive,
As an alternative to OEM,
I think that it is worthy enough.
With a hopeful price range,
If you can have color BALI,
Customer demand may also grow.
View detail