Reviews
Purchased because I want Hazard
MSX125 (MLHJC92) The product has been installed in a
Holes can be machined and installed without problems using the Instruction Manual pattern.
Wiring length is fine, but the number of pins in the ConnectorCase is different by one. (It is like the difference between ThailandSpec. and Japanese specification.)
The 9-pin ConnectorCase had to be changed to a 6-pin type, but since the position of the pins is the same, once the pins are removed and inserted in the same position in Minus, the case could be used without any problem at all.
Blinker's Touch is different from OEM and this one has more Snap and feel.
View detail
Connector needs to be replaced
Purchased due to the change of gas pedal holder, the normal switch box changes the position of the lever.
It's just the right thickness, isn't it?
But if you want to put it on CB250R, you need to change the connector.
Wiring purchased and installed a set of connectors that fit the brake, kill and starter CB250R.
No problems with functionality.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
I'm writing well.
It's been a while since I bought it, and I thought it was necessary to change it at first, but the more I use it, the more satisfied I am with the dress-up parts. The regular genuine lever was really uncomfortable. It's far from my hand and the lever is thin. It was hard because I kept turning off the bike with the genuine lever, but it's so nice that it's almost gone after changing it. I highly recommend it. View detail
A better throttle pipe for the GROM!
This is an improved throttle pipe from KITACO for the Honda MSX/GROM. It makes a slightly quicker throttle response (around 10%) which is ideal for the street use and not not as much as an racing quick action throttle. It's a good priced part and as usual from KITACO, a very good quality one. View detail
The usual.
This is the Lock wire I use all the time.
I bought it because it was out of stock.
I have Sizes before and after this one, but the 0.57mm is the most versatile.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
It's comfortable
The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. It's good ------------------------------------------ ---------------- The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. Good. Powered by Google Translator View detail
Fits: HONDA PCX125, HONDA PCX160, HONDA ADV160, HONDA SUPER CUBC125, HONDA CROSSCUB110, Others
Keeps my hands warm!
Picked up these knuckle guards for my '22 Super Cub and they work excellent. They help to keep the colder air from freezing my hands. I do wish they had a matte black option, but that's certainly not a deal-breaker. They fit well with the factory mirror mounting points. I have an aftermarket mirror and a phone holder on one side, along with the Puig windshield and nothing interfered with the guards. They stick way out from the handlebars and I don't feel like my fingers will hit them when I'm braking or twisting the throttle. Just a note, the left side mirror mount is not in the same place as the right side, so the knuckle guard might touch and rub against the turn signal if you have an American version of the Super Cub. I was able to put just a small amount of pressure on the metal bracket to push it down with no problem. View detail
![Stainless Lock Wire [0.57mm] 5m](https://img.webike-cdn.net/catalogue/11305/056-0500057_TS.jpg)
Wiring.
I bought it to do Wiring.
It is safe to say that it is for Motorcycle.
I wanted to use it just a little bit, so I was glad to find a shorter length for sale.
View detail
Fits: KAWASAKI Z125 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125, HONDA APE 100, HONDA APE 50, HONDA APE 50 TypeD, HONDA APE 100 TypeD, HONDA glom, HONDA MONKEY125, HONDA GB350S, YAMAHA BWS 50, HONDA Universal for Φ22.2 Handle, HONDA PCX125 E:HEV, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA GB350
KITACO handle handle
Highly recommended. There are many improvements in the installation area when installing or disabling this product.
Reasonable price, easy to install and good workmanship. Highly recommended. I recommend it for its good quality and easy operation to install on my Monkey 125.
Good quality, good quality, no need to say anything. -------------------------------------------------- -------- Highly recommended. In the installation of this product, it is improved in the parts that can be installed. Reasonable prices, easy installation and good workmanship. Highly recommended. Recommended for quality and easy workability to install in my Monkey 125. Good quality, good quality and no need to say. Powered by Google Translator
View detail
The construction is too crude to use as it is.
I bought it at the end of last year with the intention of trying things out.
I was planning to assemble it before spring, but I am hesitant to use it because of the messy construction as shown in the pictures.
Throttle boty, Inlet, everything needs to be fixed.
This guy is High SoloSpec.
There is no mention of this in the product description.
A pledge! This kind of thing is what they make you write before you buy.
I have no idea what they are thinking or what their intentions are.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
KITACO Short Reach Lever Set
Thank you for the fast delivery^^
It looks more like a genuine model than the other levers -------------------------------------------- -------------- Thank you for fast delivery ^^ The other lever looks like a pure type Powered by Google Translator
View detail
Fits: HONDA FORZA, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125Hybrid, HONDA PCX150, HONDA PCX160, HONDA ADV150, HONDA ADV160
Handling becomes lighter.
Running test
Weight of Bar End End 200g→170g." The Handle Ring becomes lighter due to the change of the handlebar's thickness, and the vibration transmitted to the handlebar is not a problem, but it may lack stability for those who often drive at high speeds. However, if you drive a lot at high speed, it may lack stability.
View detail
Fits: HONDA FORZA, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125Hybrid, HONDA PCX150, HONDA PCX160, HONDA ADV150, HONDA ADV160
The Shock driver in the instruction manual is not required.
About the product
The texture is very good, but it is smaller than expected. Grip and Bar End Cap A gap opens between the (Total weight:170g/OEM equivalent)
Installation
It's in the instruction manual. Shock driver." is not required.
Utilizing BOXWrench to meet Cap bolt (M6×40) standards. +Bit." and expressed in 10 levels of force, it can be loosened with about 30% of the force.Cap bolt has a Screw lock." A small amount of the "P" is applied and can be installed in about 5 minutes.
About the running test
We will re-submit if we feel a change is warranted.
View detail
Fits: HONDA Forza300, YAMAHA MAJESTYS, Others Φ22.2 for Pipe Handlebar, HONDA glom, HONDA FORZA-SI
For vibration reduction
Easy to install and ideal for groms Size
Price is high but reliable Manufacturer is the deciding factor.
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
black brake lever
It arrived quickly and easy to install, when installing the clutch kit the brake lever came in silver, now both are the same color. I recommend both kits. View detail
Fits: KAWASAKI Z125 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125, HONDA APE 100, HONDA APE 50, HONDA APE 50 TypeD, HONDA APE 100 TypeD, HONDA glom, HONDA MONKEY125, HONDA GB350S, YAMAHA BWS 50, HONDA Universal for Φ22.2 Handle, HONDA PCX125 E:HEV, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA GB350
Very good product
A few days have passed since the installation of the steering wheel brace, so here are my impressions. The parts have a high quality feel and I like them very much. I will comment again on the handling after a few more days of use, since the mileage is still low. Other than that, I have understood a few things. I have also attached the monitor of the driver's recorder to the car, and when I check the monitor, I see that the car is still in the same condition. I checked the monitor. Leaning heavily." I do. Wondering why? I went to check around and ?? the steering wheel brace. "Way off." It was tilted. (Laughs.) Perhaps it was not tightened enough. We immediately retightened and adjusted. Please be careful. View detail
Fits: KAWASAKI Z125 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125, HONDA APE 100, HONDA APE 50, HONDA APE 50 TypeD, HONDA APE 100 TypeD, HONDA glom, HONDA MONKEY125, HONDA GB350S, YAMAHA BWS 50, HONDA Universal for Φ22.2 Handle, HONDA PCX125 E:HEV, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA GB350
Handlebar Brace and Monitor with DoraReco Monitor
Handlebar Brace and Monitor for the DVR are now installed together.
1.Improved handling with Handlebar Brace
2.De Spray y 5.0Inch." sTent part and Handlebar axis part of the
Mounted on Handlebar Brace due to clearance issues
The running test is yet to be done, but the product's high quality and KITACO products
I have high expectations because of the reliability of the Just to be sure, Parts has a
Glass coat to prevent weathering and monitor fit.
Better.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
Satisfied.
The original Monkey lever was too far away for me, who has small hands, so it was uncomfortable. It was difficult to stretch my fingers to grab the brake lever, and the clutch sensitivity was also difficult to get. I looked for it and found something like this, so I bought it. Looking at other people's reviews, they said it was very good, so I'm looking forward to installing it and trying it out. -------------------------------------------------- -------- Monkey Pure Lever was so far from my small hands, it was burdensome. It was hard to reach out to catch the brake lever and it was hard to catch the clutch. It was very nice to see other reviews. Powered by Google Translator View detail
RelayLarge sturdy without replacement.
The Blinker Can Engine Starter Motor is now smoother than the OEM one, and there are fewer cases where it is not turned off even though it is supposed to be turned off.
Also, I installed only the switch box and checked the operation of Relay as OEM, and found that BlinkerQuantity:Pair (for Left and Right) Hazard, Passing, Horn all worked fine, so I am using Relay without replacing it.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Product # 909-1083001
There was a need to replace the cables on my Honda Monkey. The original cables had damage to the outer jacket. To my delight, KITACO had these items in its product range. And KITACO was not let down, the quality of the cable turned out to be on top. There were no problems with the installation. View detail