Reviews
Great Value
Perfect for the price. Fittment is great and very easy install. Mirror quality not 100%, but more than enough (given the cost). Fine if you are use to bar end mirrors. Two-way fit option is great. Perfect for the Hurricane bars. View detail
Cospa is quite good.
Anyway, cheap is the best Merit.
The quality is in line with the price, especially the bolt on each part is quite cheap. Be careful not to over-tighten the bolt, as it can easily be nipped.
It is by far lighter than the expensive bar end mirrors of DAYTONA and TANAX, so there is rather less anxiety about it falling off.
View detail
Minimum required visibility
Size is small, so visibility is minimal.
On the contrary, it makes you look at it neatly lol.
It only worked well outward, but I don't feel like I've widened it that much.
With normal Mirror, the arms are reflected to a large extent and the camera is scared, but this has been eliminated, which is what we were aiming for!
Quantity of Washer:Only 1pc. is sandwiched, but there is no interference with Axel
Adjustment is a bit of a hassle…I had to adjust the angle of the clutch lever because it was interfering with the clutch lever.
Well, the rest is definitely Parenthesis good lol.
View detail
A little wobbly, but … looks good.
I installed it on CBR400R.
The handlebar was previously replaced and installed with 16mm inner diameter separate handlebars.
It will probably loosen and fall off while riding, so it must be retightened.
There is a wobble.
If you're concerned about it, you shouldn't.
View detail
Integrated Aluminum Bar End
The rubber grip has deteriorated and rotted, so I replaced it with this one, which can be easily removed by spraying some parts cleaner in the gap between the grips. I think the durability is good, but the cost performance is very good. View detail
Good budget mirrors with a better viewing angle
About quality and texture, I can confirm that the quality is good and that the material used is aluminum alloy that has been machined to shape. About the feeling of use, These mirrors are less instrusive then the original mirrors and when fitted to the bike also offer a better viewing angle from their convex designed mirror. Products to buy together, While working on the handle bars it would be advantages to also add a set of more comfortable grips to your cart. Difficulty of installation, I can say the fitment of the bar end mirrors for my installation was very easy due to the simplistic design of how the mirrors secure to the inside of the handle bar pipe. Cost performance and comparison with other products, The pricing of the product is great. You receive a set of bar end mirrors that are of good quality and a great look. The pricing of the majority of the other bar end mirrors available are much higher for similar product. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
I installed it on my Grom. This is cosmetic.
I used it on a JC75 Grom.
I had been wearing Mirror by Mukawa, but I wanted to try Bar end mirror, so I was shopping around and this product caught my eye.
I bet the build quality is shoddy at this price...
I was surprised when I saw what I received.
Aluminum's Cut-outs were very well done.:Pair (for Left and Right) The price is surprisingly low for a
Grom's STD Handlebar has an M6 screw hole inside, so we used only the screw with the supplied Bar End Rose.
There was no Clearance with the Grip at all, so I used a Washer that I happened to have and Offset it about 4mm outward.
Mirror itself is quite small, but can it be used for practical purposes? It is like "Limit". Visual confirmation is necessary when changing lanes.
Thanks to the Handlebar, there is no vibration at all, which I was worried about.
The color of the mirror was also Blue in the Defferential Gearo, but a Plain mirror for replacement is also included, which is a perfect addition.
It is a little uncomfortable until you get used to it, but there is a Bar end mirror.
View detail
Looks good Parenthesis.
I put it on Up.
I can see more than I thought I could, but it's small, so I have to check visually.
I think there is quite a bit of flexibility in adjustment.
The M8Screw weight bar was left over, so it was installed using an M8→M6 InsertNut.
I think it is very Refreshing and Parenthesis like STREETFIGHTER!
View detail
ZOOMER Separate shop
I haven't installed it yet, but it looks very solid and luxurious. View detail
It has a luxurious feel to it
I was looking for a Mirror that would look good on MOTARD.
Certain Manufactures used by foreign countries are not affordable because of their outrageous prices, but this Mirror is not cheap for the price.
There is little rattling and no shaking while driving.
I did not use the supplied bar end parts, but prepared and installed a separate Clamp on the Handlebar.22φIt seems that the Handlebar can be used without the Clamp.
View detail
It may be a subtle quality.
This is my first Bar end mirror.
Small size, but visibility is better than I expected.
The comparison is with KIJIMA's previous Mirror.
However, visual inspection is required depending on the situation. Safety is the priority.
What I found subtle in quality
1,Mirror joints of the plating have water stain-like marks right after rain.
2,Aluminum powder fell from the part where the handlebar is fixed.
3,It felt quite heavy.
4,I thought the cosmetics cost was high.
The good.
1,Good appearance, personal differences may exist.
2,Reduced arm reflection even in own mounting orientation
3,Blue lens is a personal ?
4,I thought it was surprisingly easy to adjust the orientation.
Overall, it is just okay.
STD Handlebar requires a separately purchased item.
Also, the attached handlebar fixing parts have not been used.
I could not get the nut part in the STD Handlebar.
So I matched it with additional color purchases.
I have attached a photo for your reference.
Included BoltM8NORMAL is M6
Additional Parts needed
Bolt;M6×40
Collar:for I.D. 6 O.D. 12.6 t2 Used on outside
Collar; for I.D. 6 O.D. 18 t3 Used inside
Finally, I don't really recommend it for STD Handlebar groms.
If the conditions are right, it might be okay.
View detail
it's the best
It was a good decision to switch from a Swallow handle to a Continental handle.
Best
View detail
ZOOMING
I purchased it and it was the right decision.
I had a lot of trouble with the length, but it was JUST right.
I look forward to working with you again.
View detail
Better than expected
Handlebar is HURRICANE's Forward Conti2.
Installed more securely than I expected.
The curved Mirror has a wide viewing area, but the size is small, so it takes some getting used to to get a sense of the distance.
To be honest, I wasn't expecting much, but now that the Handlebar area is Refreshing and Parenthesis has improved, I'm satisfied.
View detail
For ZOOMER use only
I switched from DAYTONA's Swallow handle.
Positionally it was good.
View detail
Bar End Mirrors from Rin Parts
* About quality and texture, Durable black painted finish over the aluminium housing and mounting brackets. * About the feeling of use, Extremely happy with the low profile look of the front area and I can now see clearly what is behind me. * Products to buy together, To tidy up the front area further a nice set of machined aluminium brake and clutch levers. * Difficulty of installation, The installation with aftermarket handle bars is just insert into the end of the bar and tighten down the allen key bolt, then remove the Honda OEM ones and plug the mounting holes. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, No cheaper bar end mirrors of this style and great quality for the price. Webike do offer much fancier designs and machined aluminium finishes if your budget allows. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you still have the Honda OEM handle bars installed then you will not be able to just insert into the end of the bar and tighten down the allen key bolt, modification of the setup will be required. Use the product reviews to assist in making a decision on your purchase. View detail
RIN PARTS Bar End Mirror
About quality and texture - Top quality. Cast aluminium body with a nice chrome finish to match the old school style motorcycles. About the feeling of use - These are much better looking style wise then the OEM Honda lollipop mirrors and I now have more visability behind me due to the wider mounting position of the mirrors. Products to buy together - After removing the OEM mirrors you will be left with exposed bolt holes in those mounting points, so you will be wanting so blanks to cover these up. Webike offer plastic ones at a low cost which blend in well or cnc machined ones if you need to add some bling. Difficulty of installation - Once you remove the OEM bar ends on the Monkey their will be inserts let in the handle bars which you can use to mount up these bar end mirrors once you discard the spreader rings. Easy install that will take 30 minutes to complete. Cost performance and comparison with other products - These bar end mirrors are on the cheap end of the pricing scale but I find the quality tops for the money. If you want the best bar end mirrors out there then you'll want some CNC machined ones at a much higher cost. Webike have a great range to choose from. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - Take into consideration the diameter of your handle bars when looking for bar end mirrors as these will not fit fat bars due to the larger internal diameter. View detail
Rin Parts Rectangular Mirror VR1
Good angle and size without being too big and bulky. Price is very reasonable. Very good to include adapters for many types of bikes. I like the blue tint which clarifies the view a bit. Should fir very nice on my bike. View detail
RIN PARTS Bar End Mirror
About quality and texture - Top quality. The surface finish from the CNC machining is so much better then the plastic OEM mirrors. About the feeling of use - They mount firmly to the handlebars with zero vibration even when idling the bigger 1200cc V-twin. Products to buy together - Some short CNC brake and clutch levers go together nicely with these mirrors. Difficulty of installation - Installation process is easy and can be accomplished with just an allen key but I did find that I needed to add a spacer on the throttle side to stop the mirror binding up on the throttle tube. Cost performance and comparison with other products - $32 AUD for a set of anodised CNC machined mirrors Just as good as the expensive ones and I'm not a fan of spending big dollars on mirrors as they are something I damage quite easily. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - These mirrors have a convex lens which can be strange to use initially but once you get use to them I find them much better then a standard flat mirror. View detail
It's cheap, but the shape and performance are both perfect.
It's cheap, but the shape is cool and can be installed on any motorcycle as long as you have an adapter.
The quality of the detail is there, but... It's cheap. "If anything, I'm lucky to get it at this price. I think it's just about the right amount to give up.
It is recommended for those who want to introduce the Bar end mirror easily.
The mounting area of the Mirror is about 30φ.
View detail