Reviews
I wanted to install Inch bar.
[How is it used?
I wanted to install a Taper Handlebar (Inch bar? Fat bar?) which was popular at that time on my DJEBEL250XC. When I was looking for a compatible clamp to install on my DJEBEL250XC, I purchased this product made by JILLS, which was the cheapest product I could find at the time.
Was the one you received as per Image?
As a novice mountaineer, I was used to seeing a regular handlebar of 22mm, but the thicker handlebar of 28.5mm was a new experience for me. The Real Racer." It looked very Parenthesis-like.
natural The "two bites." Therefore, I did not think about the Merit of Millibar or the Demerit of Inch bar, but focused on the good appearance of Parenthesis and kept on going.
The Handlebar Clamp, which allows the Inch bar to be mounted, was just as Image described.
How did it compare to other products?
I have never purchased a clamp for Inch bar conversion other than this product, so I cannot compare them, but I have never had any trouble using JILLS clamps, so this was the best product I purchased to achieve my goal because it was not bad looking and had no trouble at this price. I think it is the best product I have purchased for the purpose.
[Points to note]
The OEM Handlebar Clamp was designed for a 22mm diameter handlebar, but the OEM Handlebar Clamp is thicker than the OEM Handlebar Clamp, so the mounting position is inevitably higher than the OEM Handlebar Clamp.
If you do not like the Up position, please purchase a Low position type Inch bar or make the final height adjustment on the Handlebar.
[Included Parts:were they on?
Quantity on the underside of OEM's Clamp:The lower Clamp and upper Clamp of the for inch bar to be set is Quantity:Set, 4 Bolts to fix the lower Clamp of OEM and the lower Clamp of Inch bar, and 4 Bolts to fix the Inch bar are Quantity:Set
[Was there anything that disappointed you?
I have no complaints about the product itself and the Color variations. "Silver" "Black" "Red" The three colors are available in the following three colors
If I may be so extravagant, it would be nice if you could add more color variations, but if the cost increases as a result, I'm fine with keeping the colors and price at the current level.
0Other items that may be useful include
Point and hang of installation
There are no points or hangetc. on the clamp side, and it is better to pay attention to the positioning of the Handlebar or Guard & Lever to be installed.
Please make sure to check the optimal handlebar installation angle & compromise position of both Levers and Guards during various movement positions such as normal sitting, standing, back load riding with the hips pulled back, front load riding, etc., and make sure to fix this fixation.
[ITEMS TO BUY TOGETHER
Since you will be using this product, it is essential to purchase an InchBar type handlebar with a shape that matches your Riding position as mentioned above.
If you can afford it, you should also purchase peripheral parts such as grips, hand guards, short type brake and clutch leveret, etc. that suit your taste.
[Opinions and requests to Manufacturer
Thank you for responding to these niche demands, and please keep up the good work.
View detail
Cospar good
OEM Product had deteriorated and was replaced.
OEM Material:The texture is better now that we have changed from Plastic to Gold genus.
The 19πHandlebar from SEA BASS will not fit without modification, but it can be installed by replacing it with an OEM rubber.
I am satisfied with the improved appearance.
View detail
Fits: HONDA Super Cub DX, HONDA little cub, HONDA Super Cub STD, HONDA press cub, HONDA Super Cub DX, HONDA little cub, HONDA Super Cub STD, HONDA press cub
It is slightly long.
I use it for my LITTLE CUB.
There is a difficulty in fitting. Because it is a little long, the grip end part is left over.
The Switch box cannot be moved, so it cannot be used as a countermeasure.
View detail
If you just want to use it, this will do the trick!
You may want to relocate Mirror quite a bit and use it, right?
With OEMs, it's often attached to the switch box or rebar clamp, and this is handy when you want to get it out of the way.
This type of product is available at PinDrill, but if you just want to relocate it, this is good enough for you.
View detail
It's cacophony
Lever of Toggle is smaller than I expected, so it hurts my fingers a little bit (twang, twang, twang) When you put the blinker back, you have to tilt it back to the other side because of the loose feeling of operation I'm happy with Large for the look and feel of the product
The packaging and the Instruction Manual are very thorough, and even the patterned paper Seal for drilling holes is included I can feel the manufacturer's conscience in the fact that it has
View detail
It's too hard
I gave up using it because it was too hard at the time of installation
When I tried to install it, it stopped in the middle, and when I tried to remove it, I couldn't get it off, so I ended up tearing it up I removed it Some resolve to put it on with a hardness that is impossible to reuse? I'm not sure if it's necessary I like the color, shape and price, but I would like to see a softer Material
View detail
A little hard
It is harder than other companies of the same type.
Some people like stiffness, so it may be good for those who like it.
I would rather have been a bit more soft.
View detail
The attached Bolt ,,,
The included Bolt was easily torn off during tightening.
Let's pay attention to Torque at tightening.
Other than that I think that it is an excellent product for Cost performance.
View detail
It is different from the notation Size
Quantity with different colors : I bought 2pc.
Although it is with Pull back 165 mm, it is only about 100 mm even if you measure it.
It is disappointing because of the difference between Large and I was planning.
I do not know which country's production as goods, but I use it in other Motorcycle "Renthal" "Risma" "ABM" There is nothing to compare with.
Speaking of Taper, it is invisible to Taper.
Material is also not specified.
Well, let's use it as a cheap piece.
If you want to have a chance, it's okay to put it 4 to 5 times.
"Because there is cheap there is a translation" - - - - I said well.
View detail
Not bad
Bar End Since it felt that the insertion portion was Rubber little by little, I took a drastic change.
I think that it is good for the price.
I was able to install firmly.
As a precaution, the Screw accuracy of the Nut part was bad and could not be installed by idling even if it was tightened.
Tap cut it and it was safe to install it.
View detail
It looks nice - - -
Cospa is good. But it seems to be suitable for Rubber inserted in Handlebar, but there is no Instruction Manual. It was a failure in this way of attachment thought that this shape would be this one. I started running out while running at high speed. I fixed it with ServiceArea. I replaced it with the Rubber of the Bar End I used before and I am using it now. View detail
Mirror installation of KSR 110PRO
The acquaintance attached Mirror under Handlebar is often Parenthesis, purchase, part cut part is obviously wanted to imitate, but impression that there is no part that cuts hands such as BALI and it is not bad despite price was.
After actually installing it, I closed the Screw in the place where the Handlebar was bent, and it cracked quite easily. My mistake I did not put on the straight side of Pipe.
I finally got it like the picture below. The degree of freedom of installation is high, I think that not only Mirror but also various ways of using it are cheap.
View detail
I made Bar handle, so I tried it
I bought it for the bar handle of ZX - 14R.
We, the product of this hand is the first time, performance More than anything else,
"I am also using MOTOGP. "
I am interested in things called '
I bought it in a Dress-up mood.
The thing itself is Green Light which is somewhat brighter than Green Light of ZX-14R, as shown in the picture.
Installation is - - -
Instruction Manual was not attached. (TΔT)
I thought that Bolt was in Anchor and it would be better to close it,
I do not understand the meaning of the Spenser in the Grip end part,
Quantity : 1 Set of 2pc. Is it? Quantity : 1pc. Is it?
Do you fit in with shape problems?
Is it just a lid?
I do not understand well, first of all,
"I got it like this. "is (Lol)
Although the angle of the Guard bar seems to change,
After tightening, it turned inwards and was fixed,
Which stage do you open and fix?
I want to see it..
In terms of things, I think that it is not so bad,
Oh yeah, it is not a thing you are attaching,
No one can hear it (Lol)
I want you to enclose even things that describe simple installation methods.
Mounting method, beforehand, similar products etc.. It's better to check the ones with hompe or blog
View detail
Cheap to use
【What made you decide the purchase?】 Low price
【How was it actually used?】 good. Useable. Simple.
[Is there anything I was disappointed about?] At the time of temporary fastening, the attached Bolt could not tighten the hand. It was a work at a time but I felt uncomfortable.
【Hope for Manufacturer - Please tell me if there are any improvement points?】 Improvement of Bolt, Tap.
【Have you compared items?】 None
[Others] It attached to KDX 125 SR purchased in second hand.
Mirror used what I had in home Garage.
View detail
Satisfied with Cost performance and shape
The price was cheap so I did not expect so much but my expectation was betrayed in a good way.
At first glance I also like to grasp the Bar End with OEM-like Small fingers likes a handy shape.
Even if it falls down and it breaks, I am thankful that the price is cheap.
View detail
Small Baumend
I thought that it was more delicious though it was a selfish thought but it was not Small except it. By the way, the size of this was not written. The thickness is the same size as Millibar. It was nice to have one more deck. Well that would be impossible to buy at this price.
There is absolutely no problem building. It is securely installed.
It is pretty bright Blue.
Rubber is also LargeSmallQuantity : 2pc. Each one has a set.
View detail