Reviews
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA650R, KAWASAKI VERSYS 650
For NINJA400R
Installed on NINJA400R.
Since it is an important safety part, we asked Motorcycle shop to install it.
The feel of operation, texture, etc. was perfect without any complaints.
If you are not confident about installing it yourself, ask a professional contractor to do so.
View detail
Fits: YAMAHA FJR1300, YAMAHA FZ8, YAMAHA YZF-R1, YAMAHA YZF-R6
The texture is lovely.
Used in 2008 YZr-R1.
Simultaneous replacement of Grip and Bar End.
If you install it as it is, there is a large gap between the end of the grip and the end of the bar, which is not a good parenthesis. Well, there are many motor cycles like that.
It is not enough to just attach a pontoon.
This kind of thing can be done neatly by modifying and adjusting it to suit the motorcycle.
The spacer was kindly included in the kit, so we shaved off about 4mm of the gap and adjusted it to 1mm on the Throttle side.
This is a consideration that the manufacturer has gone to the trouble of creating a high quality product, so it should have a good parenthesis.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI Z1000R, KAWASAKI Z1000, KAWASAKI NINJA1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Great Value
Great quality for th price, plenty of adjustment to required length. Custom colour mix match perfectly with the custom paint. Easy installation, works well with Huricane bars. Rides well. Fast shipping as always. View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX250R, SUZUKI DL1000 V-STROM650, Others , DUCATI 1098, DUCATI 1198, DUCATI 748, DUCATI 749, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 999, DUCATI DIAVEL, DUCATI GT1000, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER S2R, DUCATI MONSTER S4R
good buy
The size fits perfectly and it's a good product. View detail
Fits: KTM RC390, KTM RC250, KTM 390DUKE, KTM RC200, KTM RC125, KTM 125DUKE, KTM 200DUKE, KTM 250DUKE
Clutch lever broken and replaced
The clutch lever was broken by a standing accident, so I thought it would be a good opportunity to replace it with a foldable one.
Brake, Clutch lever and Quantity:I think it is affordable for the Set. I am satisfied with the look and the production.
However, for some reason, the clutch lever moves vertically. It is not at a Level that interferes with operation, but it bothered me, so I installed KITACO's Spacer SIMM, which solved the problem. That is the only complaint I have.
View detail
Fits: YAMAHA YZF-R6, YAMAHA FZ8, YAMAHA YZF-R1, YAMAHA FJR1300
First replacement from NORMAL!
I bought it in Black
It is a very good product with good texture and Standard.
The Bolt on the Axel side was too long,
I purchased a Bolt about 10mm shorter and installed it.
Clutch Side is installed without Spacer.
View detail
Fits: KAWASAKI ZEPHYR400 χ, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI Z750S, KAWASAKI ZRX400, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI Z750, KAWASAKI W800, KAWASAKI KLE400, KAWASAKI EX-4, KAWASAKI ER-6n, KAWASAKI ER-6f, SUZUKI GSX250FX , KAWASAKI VERSYS, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI NINJA650R
Parenthesis is better now.
Installation was easy. The Adjuster is gold because gold is everywhere on Motorcycle. I think it matches the Motorcycle very well. I think the operation is better than OEM. View detail
Fits: HONDA CB400F, HONDA 400X, HONDA CBR400R, HONDA CB250R, HONDA CB250F, HONDA CBR250R, HONDA GROM, HONDA MSX125, HONDA CBR500R, HONDA CB500X, HONDA CB300R, HONDA Monkey125, HONDA NS-1, HONDA CBR500R, HONDA CB500X, HONDA CB300R, HONDA Monkey125, HONDA NS-1
Speed La Lever set
Easy to use. Looks good. I like it. View detail
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000SF BIG1, HONDA CB1100, HONDA CBF1000, HONDA VFR800 RC46, HONDA VTR1000F FIRE STORM, HONDA X4, HONDA CB1300SB, HONDA RVF750 RC45, HONDA VFR750R RC30, HONDA VFR800F RC79, HONDA VFR800X RC80
Lever means Large
The effect is overwhelmingly stronger compared to NORMAL. We recommend lever replacement before MASTER or BRAKE HOSE. View detail
Fits: HONDA CB400SB VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CB400SB VTCE REVO, HONDA CB400SF VTCE REVO, HONDA CBX400F, HONDA CBR400F, HONDA CB400SS, HONDA Rebel300, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA STEED600, HONDA STEED400, HONDA SHADOW750, HONDA SHADOW600, HONDA SHADOW400, HONDA SHADOW1100/1100Classic
I am satisfied
It was a replacement for a Reasonable product from another company, but the texture and movement of the actuator were incomparably better. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
It is a natural assertion without feeling like it is a Cover (can be installed on the '24 model).
I was thinking of replacing the Mirror with Other Brand Product sooner or later, but when I got on the car and saw the visibility and the difficulty of adjustment of Other Brand Product etc. in the Review, I thought OEM would be fine and decided to replace the Mirror with Other Color.:Unpainted resin parts are SPEEDRA's Carbon parts, and the '24 model has been installed with no problem, so I installed the Mirror cover as well.
The one we purchased has a twill weave glossy finish in combination with other parts.
I have an impression that the type of parts that are put on the OEM Mirror is like a cover for the car dress-up parts, and I thought that I would not install it if there was any discomfort after the temporary fitting, but the material is carbon and thin, and you can see it around the moving part of the Mirror at the base. However, the material is thin and you can see it when you look around the Mirror's movable part at the base of the body.
The fitting also has some areas where the OEM Mirror is not fully hidden, but there is no particular sense of discomfort, so it was installed as is.
Installation is as simple as degreasing the OEM Mirror, covering it, and securing it with double-sided tape, but be careful not to break the cover, as you must spread the area around the Mirror's movable part while inserting it.
When I looked at the product, there was a hole at the bottom, so I wondered what it was? I wondered what it was because I saw a hole in the bottom of the product. I wondered what it was, and then I realized that OEM Mirror also has a hole for drainage?
The holes are not perfectly aligned, but they are in a functional position, so I think fitting will not be a problem.
The appearance is glossy, but it is not so strong, and you can appeal Carbon casually.
If you can't give up OEM visibility but still want to be Fashionable, this is for you.
View detail
Fits: DUCATI 916, DUCATI ST2, DUCATI MONSTER400, DUCATI MONSTER900, DUCATI MONSTER750, DUCATI MONSTER600, DUCATI MONSTER620, DUCATI 900SS, DUCATI 748
Good vibes
It was installed without any problems.
The screw and lever mechanism is GOOD because you can adjust the grip to your liking.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
I was satisfied with the vibration suppression effect.
I was concerned about the vibration of the handlebar, so I bought it as a dress-up as well.
I used to feel that my hands were numb and it was hard to operate my smartphone while touring, but after installing the device, I felt a little numbness even after riding for half a day. After wearing it, I can ride for half a day with only a little numbness.
I really like the texture of the look and the non-monochromatic design.
However, I am a little concerned that the SPEEDRALogo is a little easy to get dirty. Since it is such a good product, I would have liked to have seen some detailing such as coating over the Logo.
Compared to other companies' products in terms of simple grams, some of them are heavier and less expensive, and I feel that they are slightly inferior in terms of cost performance, but I did not regret buying Items in terms of the sense of ownership and satisfaction I got from it.
View detail
Handlebar Brace
I installed it to attach the Smartphone Holder. Installation is easy. I think this is a better choice if you are going to attach a Smartphone Bracket, as the Gold amount is not that different. View detail
Handlebar Brace
The length can be adjusted to accommodate a variety of motorcycles. View detail
Fits: HONDA CBR400R, HONDA CB400F, HONDA CBR650F, HONDA CBR400R, HONDA CBR250R, HONDA CB250R, HONDA CB250F, HONDA CBR650R, HONDA CBR500R, HONDA CB500F, HONDA CB300R, HONDA CBR500R, HONDA CB500F, HONDA CB300R
Parts removal and appearance change
I didn't want to wear a long and big Balancer because my body is small, but I didn't want to wear a long and big Balancer to reduce vibration. I couldn't find it, so I bought it. View detail
Fits: HONDA CB1000R, HONDA CBR1000RR
not quite
This product is not suitable for people with short fingers. View detail
Fits: KAWASAKI ZEPHYR400 χ, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZZR600, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZRX400, KAWASAKI Z750S, KAWASAKI Z750, KAWASAKI W800, KAWASAKI KLE400, KAWASAKI EX-4, KAWASAKI ER-6f, KAWASAKI ER-6n, SUZUKI GSX250FX , KAWASAKI VERSYS, KAWASAKI BALIUS2, KAWASAKI BALIUS
good-looking
It looks better. There was a little rattling, but it works fine. View detail
I am satisfied with the product as expected ??!
I installed the MININarrow handle on my PCX125 with the replacement of the MININarrow handle. I was able to install the Smartphone Holderetc. with no problem. View detail
Fits: KAWASAKI Z750R, KAWASAKI Z1000, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA ZX-10R, KAWASAKI NINJA1000
The Handlebar area is tightened in Black.
[How is it used?
We replaced the external lever worn by the previous owner with this SPEEDRA lever.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was not too difficult. I think it is Large sturdy even for beginners.
How was your experience with it?
The handlebar area is blacked out for a good look and easy operation.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
There was nothing in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail