Reviews
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG
It's worth the good price!
It is a bit pricey, but the texture is totally different from cheap foreign-made ones and satisfies my desire for ownership.
I chose a color that is a bit one point, but it is a good color addition.
Adjustable Clearance is also available.
View detail
Fits: KTM 125DUKE, KTM 200DUKE, KTM 250DUKE, KTM 390Duke
I wonder if it is equivalent to OEM Product.
It's a city ride.
The OEMBrake bar was replaced because it had been damaged by a fall.
Grip comfort is on par with OEM to slightly better, but that's about it.
I purchased the Long Type and it is only slightly shorter than OEM.
During OEM removal, I had a lot of difficulty because the Brake Side mounting bolt is very hard & special Minus tool.
View detail
Fits: Others Touring typeLever
Lever color change
Since I changed the Master Cylinder to Semi-radial, I could no longer use the lever I had before, so I bought a Silver Brake and a Silver Clutch Side because the Clutch Side is disproportionately Blue in color. This time I changed from Foldable to Touring type for my preference. Actually, the Lever Repair Parts are not sold at motorcycle supply stores.:The price is about 10000 yen for one set, so it is very nice to be able to buy only one side like this. I am very thankful that Eukanaya provides new Socket and Small parts with any parts I buy. It takes about 10 minutes to assemble the One Side, but it may take a little longer if you are a beginner. View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110
It looks good!
I bought this product to replace an OEM Product that was not so good in terms of plating... I had some difficulties in loosening the screws to remove the OEM Product. The color Image is exactly as I expected! I am very happy with my purchase and would recommend this product to anyone who is looking for a new product. View detail
Fits: SUZUKI GSX1300R HAYABUSA GSX1300R HAYABUSA
For looks and function!
Not only does it look good, but functionally, it is foldable, so there is less chance of it breaking if the motorcycle should fall over. The lever position can be adjusted more precisely than the OEM, and the lever position can be closer to the grips than the OEM. This is very useful for me as I have short fingers.
The bad point is that the Clutch Side has a line scratch of a few millimeters when it interferes with the Bar End when the Lever is fully gripped, depending on the type of Bar End.
I use a small piece of tape to prevent direct interference.
View detail
Fits: KAWASAKI Ninja1000SX, KAWASAKI VERSYS1000SE
AutoCruise is broken.
As per Title, the AutoCruise feature of ninja1000sx breaks when replaced.
I bought the car new and had it replaced by the Dealer and had them check the operation, but AutoCruise keeps giving me errors.
Please note that it will cost 30,000 for repair.
The manufacturing of the thing itself is good, but as mentioned above, we will not make a strong Recommendation.
On the other hand, it does not matter if it breaks, and it does not matter to those who do not use AutoCruise from the beginning.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Operates and looks perfect.
[Mounting]
Both brake and clutch lever are hydraulic and can be easily installed without wires.
[Feeling of use]
It is easy to adjust the Lever distance compared to OEM. The grip is also smooth.
[Looks]
The color of the lever and adjustment parts can be customized, so it is easy to match the color to the car model.
View detail
Fits: SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA
I purchased this product to repair standing moss.
I think there is a dress-up effect.
The feeling of use is normal.
View detail
a top rankingUp
[How is it used?
City Riding/Touring
Was the one you received as per Image?
The finish is as luxurious as the Image.
Was the installation difficult?
Oil Replacement Level.
How was your experience with it?
The Handlebar area will be a top rankingUp.
The SV650 has a severe sensor, so replacing the levers may cause errors.
It can be easily fixed by adjustment, but the Engine warning light comes on and I am in a hurry to find out what the error is.
View detail
Steady making
Anodized well and moderate weight.
It also seems to reduce Handlebar vibration.
Recommendation
View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125
Looks and feels good!
I installed it on my PCX (JF56). 6 levels adjustable from close to far with the adjuster, so it is easier to reach my fingers than the OEM Lever. I think the Long Type is more comfortable for PCX than OEM. My second daughter has small hands, and the OEM lever seemed to be a little hard to grip, so I replaced it with this one. After the replacement, she said that the Lever became well easy to grip.
You can choose from Standard Type, Touring Type, GPType, Foldable Type, and more.
We use U-KANAYA's Brake lever (GPType) in REBEL because of its good looks and texture.
When using with PCX, there are some points to keep in mind when starting Engine.
PCX does not start the engine unless the rear brake lever is held when the engine is turned on, but when this brake lever is replaced, the brake is not recognized as being applied unless the lever is held even tighter than the OEM lever, and the engine will not start. If the lever is held in the same way as the OEM lever, the engine will not start. Hey! What's wrong!" You might think.
View detail
The grip is easier for Large, but…
I bought this one because I had a double problem with NORMAL Lever being too hard and too far away.
It was easier to get a grip on it, but I didn't feel much benefit from loosening the Adjuster on the hard one.
I'm also concerned about the Adjuster on the Brake lever interfering with the Cowl when the Handlebar Lock is in place.
View detail
Fits: YAMAHA MT-10, YAMAHA MT-10 SP
Fits Clutch Side only
According to the description of the store that requested installation
The brake side of MT-10/2022~ is brembo and the structure of normal lever is different, so I was told that I could not install it as it is.
I wonder how it would be if one of the products with a conformity guarantee is unusable.
I was satisfied with the texture etc. of the Lever itself.
View detail
Fits: SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman
SkyWave (burgman) U-KANAYA Brake lever
SkyWave (burgman) 250 SkyWave (burgman) I have also Customized 400 and connecting Brake lever.
I was able to install it on my commuter PCX150 with Universal Product's Adjust lever, but I was not able to install it on my SkyWave (burgman) The new system was almost impossible to install even with modifications to the
I bought U-KANAYA's Adjust lever because of the fit guarantee, and I am satisfied with the Large change because of the great fit.
I am so satisfied that the PCXAdjust lever that I liked so far seems so cheap.
I would highly recommend it to anyone who is considering Brake leverCustom.
I will continue to be a customer for Custom.
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R
Bi RedLever and matching colors.
NINJA2 Helmet50RRR that I found and purchased at my favorite dealer last October. (2012) I replaced the UK BiRedLever when I took delivery of my new bike. I finally found a UK Handlebar End in the same color at Webig, and immediately popped it in. It only took me about 10 minutes to replace it. I also purchased a 3D Logo sticker that I found on another online retailer. It's a little dress-up! It looks great. View detail
Fits: BMW R1200GS, BMW R1200GS Adventure
Very good product!
This product is combined with OEM Parts
The high precision of the workmanship and compatibility with OEM parts allowed us to assemble the product with confidence.
I have only done a test run and am looking forward to Touring!
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Well made and satisfactory
I decided to buy it after I saw a friend of mine wearing it and was allowed to touch it. I like the fact that I can purchase each part individually in case of breakage.
It's still too cold to ride my motorcycle after replacing it, but I'm hoping that the operability has been improved.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R
Very easy to operate.
I felt that NORMAL was a little far away.
After replacement, we were able to adjust to the best position.
It became very easy to operate, and perhaps because of this, the Clutch operation feels lighter.
View detail
The finish is beautiful.
I saw a sample of a long lever of the same type in a store and felt that it was too long. I saw a sample of the same type of long lever in a store and felt that it was too long, so I bought a short lever.
The product is beautiful and I am satisfied with the workmanship.
The installation has been done with no problems at all.
As for Impression, it seems to be halfway long for my hand.
Although the position of the lever holder may have an effect, it feels longer than a short lever.
Short lever could have been a little shorter. I think it could have been a little shorter.
View detail
Fits: HONDA CB1100 EX, HONDA CB1100
I did not feel the difference in operability as much as I expected.
I know I chose a shape that was close to NORMAL. Levert is now lighter." I have not noticed any Large difference so far in terms of operability such as
Since we have not driven for a long time yet and used with Winter Gloves, the experience may change when touring long distances in the summer.
I am satisfied because my purpose is more of a dress-up.
Installation is easy as described in the instruction manual. Grease up may be necessary during installation.
View detail