Reviews
OEM Product is the safest choice
[How is it used?
MainMotorcycle's XJR1300C has brembo's 19RCS installed in the brake and clutch master cylinder, and when replacing the handlebar this time, the oil tanks of the brake and clutch were replaced and the oil tank stay was replaced. The oil hose was also newly replaced.
The original Hose is also bremboOEM Product, but it has been used for about 4 years, so we could see some deterioration, so we replaced it.
Was the one you received as per Image?
As you can see in the image, it is a plain black rubber hose.
There is an image of a Caliper being applied to the product image, but it did not look like it was measured accurately with Caliper, so I measured it myself. Please note that these are only measurements taken with Scale, so please use them as a reference.
The outer diameter was about 10mm and the inner diameter was about 6mm. brembo's Nipple is 7Φ so I think the size is correct.
The length was about 100mm. If you want to change both Brake and Clutch, you can use Quantity.:You will need 2pc.
Clutch was about 1/3 of the way to Garbage, so I felt a little wasted.
How was your experience with it?
This oil hose is an OEM product, so you can use it with peace of mind. If you buy a hose from another company just because it is cheap, it will harden quickly, or worse, crack and fluid will leak. If you have any doubts, I recommend brembo's oil hose.
[Points to note]
Hose clip for 10? inner diameter will not fit in the nipple part.
MASTER's Nipple is Material:Be careful not to forcefully pry as it is plastic and can be damaged.
Some people stop at Tie Wrap, but I think Wiring is better.
How did it compare to other products?
This Hose is very good at not sweating. Koken's Hose with Mesh sweats.
I don't know why it sweats, or if the fluid is slowly leaking out, but if it is bad, it gets soaked, but this hose, a brembo specified product, does not sweat at all. I feel relieved.
View detail
Normal.
[How is it used?
For collecting Parts in Rose.
No leaks, no sweat? It doesn't seem to sweat.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
usually
[Included Parts:were they on?
No
[Was there anything that disappointed you?
None
View detail
brembo
With the brembo brake and tank installed, we installed this one that corresponds to the diameter.
The price is not that much, so I bought 1pc. more for Spare, Stock.
View detail
brembo
Because the size inner diameter seems to be slightly different according to the brake lever of brembo and Tank installation, it is this purchase of exclusive use.
It is good because the price is not high, but Package is not good. Although it doesn't influence the function.
View detail
Most importantly, it is safe
It's like changing the brake line every time I tease it
This time, I changed the RESERVE tank to the Smoke Type of brembo, so the length is insufficient and the tank is not as long as it should be I bought a new one
I used to substitute Hose for Gasoline in the old days and it made Hose look like it was sweating For the brake line, we use the Fluid-specific hose
And since both MASTER and RESERVE tanks are brembo, Hoose is also i decided to go with brembo OEM
It's a bad idea to make a mistake because the location is only Brake
View detail
Brand
Price is cheap for Brand.
Length is cut according to your own model and used.
In 996 I cut it a bit when used on the Clutch master side.
Thanks to bremboOEM
Oil There was no leakage, installation was also easy.
View detail
The price was cheap,
Reserver tank & Bracket 1 type Purchase for replacement.
The price is cheap for making brembo, but the delivery date took quite a bit Minus.
View detail
Famous Manufacturer
I bought it for attaching bremboRCSRadial master. Tank also brembo, so I bought Hose with brembo. I think that it is good as it is a reliable Manufacturer. There was not oil leaks etc! View detail
Since the Brake master was changed into the brembo, the Tube was also made into the brembo.Although any Manufacturer could be sufficient, step was kept with the brembo in quest of self-satisfaction.
Since the Brake master was changed into the brembo, the Tube was also made into the brembo.Although any Manufacturer could be sufficient, step was kept with the brembo in quest of self-satisfaction. View detail
Since the pure Brembo master (it is not radial) was exchanged for radial one, the old circumference Parts was also renewed. Since it will bend if it is cut and used for about 40 mm, and a radius is not made small, it is necessary to decide the position o
Since the pure Brembo master (it is not radial) was exchanged for radial one, the old circumference Parts was also renewed. Since it will bend if it is cut and used for about 40 mm, and a radius is not made small, it is necessary to decide the position of a Tank carefully. It is the same and is ending with 10R fabrication at 45 degrees and 90 degrees, ..., for example, the overall length, which will think are easy-to-use if there are some which were bent and fabricated from the beginning... View detail
[Webike Monitor] It purchased together with the Brembo radial master. There is required die length, and since it is the elegance only for a brembo, it can use in comfort.
[Webike Monitor] It purchased together with the
Brembo radial master.
There is required die length, and since it is the elegance only for a brembo, it can use in comfort.
View detail
This is used for the Master cylinder of a brembo although it is natural.the Fluid -- also oozing out -- it can feel [ cannot be and ] easy and use.
This is used for the Master cylinder of a brembo although it is natural.the
Fluid -- also oozing out -- it can feel [ cannot be and ] easy and use.
View detail
[Webike Monitor] Since the Hose also had exchange and breakage of the Dust boots of a Clutch lever with Clutch Oil-tank exchange, Rubbers are exchanged one by one.I think whether exclusive elegance is the best although I feel that it is delicately hig
[Webike Monitor] Since the Hose also had exchange and breakage of the Dust boots of a Clutch lever with
Clutch Oil-tank exchange, Rubbers are exchanged one by one.I think whether exclusive elegance is the best although I feel that it is delicately high.
View detail
[Webike Monitor] It purchases in order to move the Master tank of the Clutch. Since it moved without [ that it is long ] becoming elapsing when Hose length was about 100 mm, it was good. -- it -- once -- a brembo -- being pure -- however --
[Webike Monitor] It purchases in order to move the Master tank of the
Clutch.
Since it moved without [ that it is long ] becoming elapsing when
Hose length was about 100 mm, it was good.
-- it -- once -- a brembo -- being pure -- however -- being nice .
Since only the after [
] Hose is contained, it is necessary to prepare the Hose band of phi 10 separately.
View detail