【brembo】Oil Tank Hose Review

OEM Product is the safest choice

[How is it used?
MainMotorcycle's XJR1300C has brembo's 19RCS installed in the brake and clutch master cylinder, and when replacing the handlebar this time, the oil tanks of the brake and clutch were replaced and the oil tank stay was replaced. The oil hose was also newly replaced.
The original Hose is also bremboOEM Product, but it has been used for about 4 years, so we could see some deterioration, so we replaced it.


Was the one you received as per Image?
As you can see in the image, it is a plain black rubber hose.
There is an image of a Caliper being applied to the product image, but it did not look like it was measured accurately with Caliper, so I measured it myself. Please note that these are only measurements taken with Scale, so please use them as a reference.

The outer diameter was about 10mm and the inner diameter was about 6mm. brembo's Nipple is 7Φ so I think the size is correct.
The length was about 100mm. If you want to change both Brake and Clutch, you can use Quantity.:You will need 2pc.
Clutch was about 1/3 of the way to Garbage, so I felt a little wasted.


How was your experience with it?
This oil hose is an OEM product, so you can use it with peace of mind. If you buy a hose from another company just because it is cheap, it will harden quickly, or worse, crack and fluid will leak. If you have any doubts, I recommend brembo's oil hose.


[Points to note]
Hose clip for 10? inner diameter will not fit in the nipple part.
MASTER's Nipple is Material:Be careful not to forcefully pry as it is plastic and can be damaged.
Some people stop at Tie Wrap, but I think Wiring is better.


How did it compare to other products?
This Hose is very good at not sweating. Koken's Hose with Mesh sweats.
I don't know why it sweats, or if the fluid is slowly leaking out, but if it is bad, it gets soaked, but this hose, a brembo specified product, does not sweat at all. I feel relieved. View detail

Normal.

[How is it used?
For collecting Parts in Rose.
No leaks, no sweat? It doesn't seem to sweat.

Was the one you received as per Image?
Yes

Was the installation difficult?
No

How was your experience with it?
usually

[Included Parts:were they on?
No

[Was there anything that disappointed you?
None View detail

brembo

With the brembo brake and tank installed, we installed this one that corresponds to the diameter.
The price is not that much, so I bought 1pc. more for Spare, Stock. View detail

brembo

Because the size inner diameter seems to be slightly different according to the brake lever of brembo and Tank installation, it is this purchase of exclusive use.
It is good because the price is not high, but Package is not good. Although it doesn't influence the function. View detail

Most importantly, it is safe

It's like changing the brake line every time I tease it
This time, I changed the RESERVE tank to the Smoke Type of brembo, so the length is insufficient and the tank is not as long as it should be I bought a new one
I used to substitute Hose for Gasoline in the old days and it made Hose look like it was sweating For the brake line, we use the Fluid-specific hose
And since both MASTER and RESERVE tanks are brembo, Hoose is also i decided to go with brembo OEM
It's a bad idea to make a mistake because the location is only Brake View detail