Reviews
Body color and Match
The CylinderTank cap and the body color match each other very well. View detail
bremboFluid cap
Replaced because it had deteriorated and looked bad.
Screw stuck and struggled to remove.
After the replacement, it looks different.
I feel good about the ride.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Moriwaki master cylinder cap
I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail
It is conspicuous except for the fact that it is not.
The quality of the product is very high, and the feeling that it has been replaced is very high. Although only the lid is replaced, the anodized color and the product itself is elaborately made, so it is always in view, and it stands out and gives a sense of custom. The price may seem high because it is a lid, but it is effective. View detail
Fits: SUZUKI 250SB, SUZUKI DJEBEL250XC, KAWASAKI KLX140L, KAWASAKI KLX450R, KAWASAKI KLX300R, KAWASAKI KLX250, KAWASAKI D-TRACKER125, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI VERSYS-X250, KAWASAKI VERSYS-X250 TOURER, KAWASAKI VERSYS-X300, KAWASAKI KFX450R, KAWASAKI KFX700, SUZUKI RMX250S, SUZUKI DR250R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250L(S)
Red is Fashion!
Can be installed with a single screwdriver.
Recommended for dress-up appearance.
Packing was reused.
View detail
Fits: YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA XT250X, YAMAHA XT250, YAMAHA WR450F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250F, YAMAHA TRICKER, YAMAHA SEROW250, HONDA CRF300RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250L(S)
Fashion!
Dress-up!
Installation is easy with a 7mm Spanner or MONKEY.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE 765 RS, TRIUMPH STREET TRIPLE S 660, YAMAHA MT-07, APRILIA DORSODURO 750, APRILIA DORSODURO 900, APRILIA SHIVER 750, HONDA CBR1000RR, KAWASAKI NINJA 1000, KAWASAKI VERSYS 1000, KAWASAKI Z800, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR
Beautiful product
Lightech product is very beautiful with high quality product. Perfectly fit to my motorcycle. Good material, will repeat order again. View detail
Fits: HONDA CB250R, HONDA MONKEY125, HONDA CBR250RR, HONDA CB300R
It's more upscale, but it's self-serving.
All the vehicles I've ever owned have been in these Type Caps.
I came to replace it.
I have just purchased a MONKEY125 and I purchased this item.
I chose MORIWAKI because the Exhaust System is also MORIWAKI, and I aimed for a sense of unity.
It's really rated 4.8, but −0.2 is that Screw uses OEM.
If you buy a cap in Black color, you won't mind, but the one I chose is not in Black color, so the Bolt is floating.
I am trying to find a Bolt in Stainless or Titanium.
It is my favorite place to ride and I always see it.
Also, I think the purchase price is an easy price to choose.
View detail
self-satisfaction
Looks Parenthesis better now.
Self-sufficiency.
View detail
Fits: HONDA CBR 1000 RR, KAWASAKI Ninja 400, KAWASAKI Z 1000 SX Tourer, KAWASAKI Z 1000 SX, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS, TRIUMPH Speed Triple 1050 ABS, TRIUMPH Speed Triple 1050 R, TRIUMPH Speed Triple 1050 RS, TRIUMPH Speed Triple 1050 S, TRIUMPH Speed Triple 1050 S, TRIUMPH Speed Triple 1200 RS, YAMAHA FJ-09, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ-09
Genuine Gilles Tooling Brake Fluid Reservoir Cap
I wanted to smarten up the bike with a few Gilles Tooling accessories and this was one I wanted. It is the rear brake fluid reservoir cap. Finding the right one was not hard but I did need to go through Gilles website and search that way. The price Webike had at the time of ordering was really good as they did have a sale on. With a couple more accessories I got all my order shipped together, this saves shipping costs on smaller items. I use EMS these days as they just get my orders delivered as soon as possible. The order was delivered in 5 days from shipping so you can't get much better than that. The order was well packaged and although the Gilles cap was in it's own well protected box, Webike took the time to make sure that there could be no damage to anything. A lot of bubble wrap was used which was great. The cap itself is a very very well machined part. The threaded section is super smooth, there is also a set of coloured rings you can use to put in the cap which might match your bike colour scheme. Very nice touch. A word of warning though, once you home the coloured ring you will not get that out without making a mess so choose wisely. Not a problem if you intend to keep the colour ring in place of course. I chose the red one btw. Anyway, there was not a problem fitting the cap as it literally just screws onto where the OEM one goes, that's it. Very pleased with the purchase so thank you Webike, very happy customer. View detail
Fits: HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CB900HORNET, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA DN-01, HONDA HORNET250, HONDA HORNET600, HONDA NSR250R, HONDA RVF400, HONDA RVF750, HONDA VFR800, HONDA VTR250
To dress-up the Handlebar area
I installed it on a CBR1000RR 2018 Front Brake Fluid Tank I also purchased the Rear one as well.
The gold texture is beautiful, the same shade as O-Ring's Fork.
Installation was a simple process of turning the Cap and replacing it.
I am self-satisfied, but I like the custom feeling because it is a part that is always visible.
The Sticker on the Top is pasted by myself, so I am satisfied with the Large change because of the attention to detail in being able to determine the orientation after the Cap is closed.
I guess I will have to check the color fading in the sun, but it is a reasonably priced product, so I don't think it would be a bad idea to replace it.
You may want to try a different color next time.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI NINJA1000, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI NinjaZX-25R, KAWASAKI NinjaZX-25RSE, KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI Z800, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA YZF-R25, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, YAMAHA YZF-R3, YAMAHA MT03
As One pointAccent
I purchased this to match the Rear Sets Gold.
Posh's Gold is almost the same color as Babyface's Gold and blends in very well.
Installation took less than a minute as all I had to do was turn the cap and replace it.
I also like the nice design of the Seal that attaches to the lid.
View detail
Fits: BMW S1000 R, BMW S1000 RR, HONDA CB1000R, HONDA CBR600RR, HONDA CBR1000RR FIRE BLADE, HONDA CBR1000RR FIREBLADE, HONDA CBR1000RR FIREBLADE SP, HONDA CBR1000RR FIREBLADE SP2, HONDA CBR1000RR FIREBLADE, HONDA CBR1000RR FIREBLADE SP, KAWASAKI NINJA H2 SX, KAWASAKI NINJA 1000SX, KAWASAKI VERSYS 1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000SX, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX636
One point fashionable
It looks so much better.
Very nice for a little accent around the Handlebar.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA 400X, HONDA CBR250R, HONDA CBR400R, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF450L, HONDA CBR500R, HONDA MONKEY125, HONDA CB150R, HONDA CB300R, HONDA CB500X, HONDA ZOOMERX, HONDA DIO110, HONDA glom, HONDA CBR250RR, HONDA PCX125 JF28-1000001-1099999
Best Matches
It matches the color of the car body and looks like an OEM product. I am satisfied with the color match. I could install it without any modification, even though our Motorcycle is not listed in the list of applicable vehicle models. View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI SV650X, SUZUKI GSX-R125, SUZUKI GSX-S125, KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100RS, KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
YOSHIMURA
The handlebar surroundings will be very colorful, and if you change the BrakeShield to Kawasaki's Green Light color, the red and green colors will be very beautiful. View detail
Look so good!
It fits perfectly with the existing product and the color itself is different. A product with an incredible dress-up effect! Highly recommended.
It fits perfectly with the existing product and the color itself is different. A product with an incredible dress-up effect! Highly recommended.
It fits perfectly with the existing product and the color itself is different. A product with an incredible dress-up effect! Highly recommended.
-------------------------------------------------- -------- It is perfect for existing products and the color itself is different. A huge product of dress up! I highly recommend it. It is perfect for existing products and the color itself is different. A huge product of dress up! I highly recommend it. It is perfect for existing products and the color itself is different. A huge product of dress up! I highly recommend it. Powered by Google Translator
View detail
Fits: HONDA CB250R, HONDA MONKEY125, HONDA CBR250RR, HONDA CB300R
Neat oil cap
I purchased and installed it on the cb1100ex model I was previously riding.
Installation was possible without special tools or difficulties with disassembly and assembly.
So, after purchasing CT125, I found the same product and installed it.
It's matte black and the moriwaki logo is nice -------------------------------------------- --------------- I bought it after purchasing it on the existing CB1100EX model. Installation was possible without the difficulty of assembling special tools and decomposition. So even after the CT125 purchase, there was the same product. It's matte black and the Moriwaki logo is good Powered by Google Translator
View detail
Very nice accessory for Bembo reservoir
I wanted to get something to cover the reservoir to kepp it from getting moisture in as we have colder nights here. I wanted to get one that was made for the Brembo reservoir so stuck with the Brembo brand. The tank cover is well made and has a really high cotton content which means it will soak up moisture really well. This thing looks great too which also has the appeal to everyone I know. There are 2 different types of tank cover so make sure you get the right one, this one fits nicely on a 45ml reservoir, the other one is for the clutch but as my bike does not have a hydraulic clutch, there is no need for one. I do however have a rear brake reseevoir which I have already changed to a Brembo, so I also purchased one for that in the process. Anyway, enough of the waffling, very happy witht he tank cover, it looks brilliant and does what it says on the tin View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA1000, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Z1000, KAWASAKI Z800, KAWASAKI Z900RS, KAWASAKI Z900 RS CAFE, YAMAHA MT-25, YAMAHA MT09, YAMAHA YZF-R25, KAWASAKI Z250, KAWASAKI Z250, YAMAHA YZF-R3, YAMAHA MT03, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
An improvement over oem reservoir cap
A drastic improvement over the plastic oem cap. The appearance of the item once fitted, really draws attention to itself, despite being so small. Such a shame that the stock protective plastic rear brake reservoir shield partially obscures the moriwaki logo device on the top of the cap. For the price this item is certainly value for money well spent. View detail
Fits: BMW HP 4, BMW M 1000 RR, BMW S 1000 R, BMW S 1000 R, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, HONDA CBR 1000 RR, HONDA CBR 1000 RR, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI ZX-6R 636, SUZUKI SV 650 ABS, SUZUKI SV 650 X-Tracker, SUZUKI SV 650 X, YAMAHA MT-09
unobtrusive goodness
Nice thing
The design is casual and has no sense of being "custom"! It is a very casual design, and does not give the feeling of "I am customizing!
Four colors are included so you can choose your own.
The extra note on the English version is nice!
subtle point
I'm not sure if it's a good idea or not, but it's a little expensive.
It is difficult to change the color later without damaging it, so it is necessary to choose carefully.
Required tool
・Phillips Screwdriver
Any tool that can tap with Rubber. (Used to fit color Rings)
Overall, I am satisfied with the product.
Tension is increased around the handlebar because it is the most noticeable part of the bike.
Recommended for those who want a modest Custom.
View detail