Reviews
Beautiful
The installation was easy since it was just a simple installation, and it was easy to remove the OEM screws, but you need to be careful because the screws may be hard. Also, the routing fluid leaks, so you just need to be careful about the angle. View detail
Fits: HONDA Monkey 125, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400
Beautifully Chrome Plated Rear Brake Reservoir Cap for the Monkey
About quality and texture: I am happy with the quality of cylinder cap from Posh. Machined from aluminium and finished in an extremely beautifully chrome plated finish. About the feeling of use: The grey plastic rear brake reservoir cap from Honda does the job but this chrome plated cylinder cap from Posh does it better, with a style that suits the rest of the chrome plated pieces on the Monkey. Products to buy together: Some chrome plated bar ends from Posh would also be desirable to purchase alongside the cylinder cap for their high quality chrome plated finish. Difficulty of installation: The process to install takes about 2 minutes. Remove the bolt holding the rear brake reservoir in place to allow for removal of the Honda cylinder cap, then simply swap the cylinder caps and tighten. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a beautiful looking cylinder cap with an outstanding surface finish as compared to similarly priced cylinder caps from Kitaco that have a colourfully anodised finish if that is what you prefer. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The badge does not come fitted to the cylinder cap, so you don’t need to worry about damage the surface finish if you prefer the look without like myself and you can simply add the badge if you like. View detail
Really nice finishing touch
After I upgraded my stock MT10 brake system with a radial master cylinder I had a bare reservoir. As these are prone to attracting condensation I though it only fitting to add the reservoir cover from Brembo. The price was very reasonable and easy to find. It's for the 45ml tank. Not to be confused with the clutch reservoir which is much smaller. The shipping was brilliant as I purchased other items. It literally took a week to arrive with me. Upon receipt I was really impressed with the packaging from Webike. The quality of this cover is superb, I have had cheap copies before and they simply do not remove the condensation as the material is not absorbent. This howver is great as it appears to be a high cotton content which wicks up moisture really well. Looks great on the reservoir tank too. Thanks Webike for the service you provided View detail
Really nice finishing touch
After I upgraded my stock MT10 brake system with a radial master cylinder I had a bare reservoir. As these are prone to attracting condensation I though it only fitting to add the reservoir cover from Brembo. The price was very reasonable and easy to find. It's for the 45ml tank. Not to be confused with the clutch reservoir which is much smaller. The shipping was brilliant as I purchased other items. It literally took a week to arrive with me. Upon receipt I was really impressed with the packaging from Webike. The quality of this cover is superb, I have had cheap copies before and they simply do not remove the condensation as the material is not absorbent. This howver is great as it appears to be a high cotton content which wicks up moisture really well. Looks great on the reservoir tank too. Thanks Webike for the service you provided View detail
For casual dress-up?
Aluminum cut-outs give it a luxurious feel. Ideal for casual dress-up. Easy to install. View detail
Fits: HONDA MONKEY125, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400
Expected
In the process of customizing with GOLD Style, the area around the purchased handlebar was tightened.
This has been a standard Custom since the teenage years.
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB650F, HONDA CB650R, HONDA CB650R, HONDA CB650R, HONDA CB750, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000L Africa Twin
Wow that's cool
It is expensive, but Impact is very good.
It is beautifully made and I like it a lot.
View detail
![Premium Zone Master Cylinder Tank Cap [Nissin Φ38]](https://img.webike-cdn.net/catalogue/images/19870/92727_T01_TS.jpg)
Fits: KAWASAKI ZZR1400, YAMAHA YZF-R1, KAWASAKI ZX-14R, KAWASAKI ZX-6R, YAMAHA YZF-R1M, Others
Strict Cap
The price is a little high, but Impact is a mess.
Front is also available in the same Series.
View detail
Fits: KAWASAKI KX450, KAWASAKI KX250X, KAWASAKI KX250, HONDA TRAIL125, HONDA MONKEY125, HONDA CRF450X, HONDA CRF450RX, HONDA CRF450RL, HONDA CRF450R, HONDA CRF450L, HONDA CRF250X, HONDA CRF250RX, HONDA CRF250R, HONDA CRF250F, HONDA CRF230F, HONDA CRF150R, HONDA CRF150F, HONDA CRF125F, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, KAWASAKI KX450X
Just the right visual point
Small Change Item I bought it while unifying all the handle parts with Zeta brand products. It doesn't stand out, it's pure, and it's okay. View detail
Fits: HONDA PCX125 E:HEV, HONDA CROSSCUB110, YAMAHA XG250 TRICKER, YAMAHA TW225, YAMAHA TW200, HONDA FAZE, HONDA FORZA ST, HONDA FORZA T, HONDA FORZA S, HONDA FORZA Z, HONDA FORZA X, HONDA FORZASi, HONDA glom, HONDA SUPER CUBC125, HONDA CBR125R, HONDA CB125R, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F
For BlackGold Codes
This is one of the Parts that I purchased to make the Grom BlackGold.
It is very easy to install as all you have to do is remove the original CylinderCap and attach this one.
However, I had to be careful not to level the car body firmly when removing it, or it would be a Large disaster.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI Hayabusa, SUZUKI KATANA
Ponting on New Model GSX1300R HAYABUSA
2023 MODELNew ModelGSX1300R HAYABUSA with pompon
High quality and suitable for the color of the body
It's a good feeling.
View detail
Ponting on New Model GSX1300R HAYABUSA
Installed on a 2023 MODEL New Model GSX1300R HAYABUSA.
It is a ponting off the OEM.
It looks good with the Body's color scheme.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GSX-R1000, SUZUKI V-STROM250, SUZUKI GSX-R600, SUZUKI GSX-R750
Exchange with Front in matching color
The Rear is not a very visible place, but since the Front was replaced, the Rear was also replaced.
I am satisfied with the sense of luxury, even if it is not noticeable.
View detail
Purely Appearance Custom
It is completely custom in appearance. But its effects are outstanding! View detail
![PREMIUM ZONE Master cylinder tank cap [NISSINΦ38]](https://img.webike-cdn.net/catalogue/images/19870/92728_T01_TS.jpg)
Fits: YAMAHA YZF-R1, KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-14R, Others , YAMAHA YZF-R1M
DAYTONA is the best!
I think this is a good Parenthesis. (laughter) I'm so glad I bought it! View detail
Fits: HONDA CBR1000RR, KAWASAKI NINJA1000, KAWASAKI VERSYS1000SE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-14R, KAWASAKI ZX-6R, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA YZF-R1, YAMAHA YZF-R6, BMW S1000RR, HONDA CB1000R, HONDA CB1300SF, HONDA CB400SF Revo, HONDA CBR600RR, KAWASAKI NINJA250R, KAWASAKI Z1000, KAWASAKI Z750
Titaniumium color fine
It's just a matter of removing the existing lid and replacing it, but I like it because it looks more luxurious than the NORMAL Plastic. View detail
Favorite Brand
I've always thought master caps were parts to be replaced.
I was wondering which Manufacturer to choose when I found this product.
I chose this one because it was also my favorite Brand!
Nothing wrong with the Size and texture.
View detail
![PREMIUM ZONE Master cylinder tank cap [NISSINΦ59]](https://img.webike-cdn.net/catalogue/images/19870/92729_T01_TS.jpg)
Fits: Others NISSINMaster cylinder tank cap O.D. 59 (some φ61)
For cb400sf 2022
It's aluminum, has a nice texture, and matches the vehicle perfectly! View detail
For MONKEY125.
The OEM product was replaced with MORIWAKI's ZeroAnodizedTitaniumium Exhaust, and since the exhaust system is down, the Rear Master Cylinder cap is also in full view. The color of the cap is nice, and it is well made and looks good. The price? The price is good, but the rate of the Point is high. View detail
Yoshimura logo with OEM feel
I replaced the Master Cylinder (Clutch Side) on a 3rd generation GSX1300R HAYABUSAEJ11A. To install the YOSHIMURA cap, all I needed was a 2.5mm Hexagonal Wrench, but just to be safe, I lifted up the rear wheel, removed the Screen, and kept it level. View detail