Reviews
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
It is easy to install.
I purchased this for TSRCarbon Front Fender.
For OEMBrake hose, drilling is required for the Front Fender without this product.
The installation itself is Quantity:Pair (for Left and Right) The shape of the bracket may be different for each model, but if you read the Instruction Manual, you should be able to install the bracket with little chance of making a mistake.
The time required is about 30 minutes.
The stars are a little bit low ….
Separate tools (hexagonal bar Spanner and Wrench) are required.
Increased periodic retightening work
I think it fits in nicely, but some people may feel it's forced.
And so on.
View detail
It looks better for the ease of use.
I bought it because the first Sleeve that came with the hose had the letters opposite to the direction the Brake hose was attached and it was only on the One Side. I bought it knowing what it would look like since it came with my previous Hose, and I guess it is this size because it fits the crimp, but it would look a little more impressive if it were a fewmm longer.
If it were cheaper, I would give it 5 stars. Also, I was happy with Yellow or Black, but it would be nice to have color variations.
View detail
For Brake hose protection
I bought this to protect my Brake hose and prevent scratches.
It's a little Large odd to put through without making a cut, but it's good for protection. I wish the price was a little lower or came in multiples.
This time, I bought it together to try the different Size.
If I can use it in a good way, I will buy more.
View detail
One point's fashionable Parts
I bought the Brake hose made by Active, so I bought this one along with it.
I think that this Sleeve is a part that is attached to the Crimp part of the Hose to show Fashion.
This time I chose the Yellow color and bought it to hide the Silver color of the Crimp while aiming for One point, but it was on the Hose from the beginning (lol).
If you want to look fashionable, this is a must.
View detail
For brake hose
I bought this at the same time as the Clamp, but why it doesn't have a split is a mystery to me. I used it with Cutters. It is good if the one with the interruption is sold. View detail
It's easy to make into a radiphone, but
Ordered to install a full-length Φ14Radial master cylinder on the CT125CT110 HUNTER CUB for the purpose of hose extension.
Just fit is a good way to get a neat measurement and put in a Mesh hose or UniversalRubber hose, but ……
Easy to think that with just a little extension, well, anything can be done.
The direct screw-in type only comes out in a straight line, making it impossible to adjust the direction at all.
This is the only thing I liked about the old Banjo bolt system.
Well, it turned out to be a dumb way to go around, but we got it installed with no problems, so that's good.
Otherwise, no problem.
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1200GS Adventure, BMW R1200GS, BMW R1200RT
Custom look only
NORMAL's Material:PlasticCover itself is lightweight, so it's totally customizable in appearance only!
If you are replacing the High Up Torque Rods with the High Up Torque Rods, the width will not match, so it will take a little bit of brute force to install the rods.
I suppose the shape makes it unavoidable, but it would have been better if it was a little cheaper.
View detail
A perfect fit for the OEM HoseBracket
The external shape was perfect for the OEM hose clamp!
As an afterthought, the Hose is already rubbed and Wound is already in
Why didn't I come across it a little earlier?
It's essential if you're going to mesh hose!
View detail
Fits: BMW R1200RT, BMW R1200GS Adventure, BMW R1200GS, BMW R1200RS, BMW R1200R
I'm building this place out of Carbon
The Left Side of the car body is not very noticeable if you tilt it in STAND
And the Brake hose cover on top of the shaft drive is well made of Carbon I was going to build it
It doesn't feel right with a single body, but by combining it with other Carbon parts, it will be unified A sense of feeling comes out (^^)
View detail
The Hose clamp section is finished like an OEM (^_^)
【What made you decide the purchase?】
- I'd like to fix Mesh brake hose with NORMAL's Hose clamp
【How was it actually used?】
Purchased Hose clamp rubber 14 mm in outer diameter according to the inside diameter of Hose clamp.
Since I installed it after incorporating Hose, I installed it with a notch.
It installs so as to suppress it with Hose clamp, so even if there is a slit, it is used without problems.
Since NORMAL's Hose clamp can be used as it is, even after exchanging Brake hose for Mesh Type, the Hose clamp section is finished like an OEM (^_^)
【Mounting was difficult?】
It was not particularly difficult.
【Please tell me the installation point and hang】
If you install Hose clamp rubber before installing Banjo adapter in Hose, I think that it can be installed without cutting.
[Is there anything I was disappointed about?]
Nothing in particular.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think whether there may be a Type with a slit from the beginning.
【Have you compared items?】
Nothing in particular.
[Others]
It will be the Motorcycle that I used to ride, but it seems that ClampRubber here is still in use.
* "The 12th Impression Con test" (https : / / www. webike. net / campaign / 2017 / 11 / 20171201_impression_contest / ) I am writing Impre with reference to the Template that was prepared at.
View detail
Hose clamp rubber
When exchanged for Mesh hose I purchased because there is a gap when NORMAL's Hose clamp.
I noticed before ordering that there was multiple Size so I got the necessary Size without difficulty.
Quality etc. There is no problem, but the price is a bit expensive
View detail
It is convenient when saying when you keep a couple of standings
This usage was used for protection of Mesh brake hose,
You can substitute Vinyl Tape for Spiral Tube, but I used this to think about the appearance,
If it was the ReplicaBoom in the 1980's, even in a round winding with Tape as a first aid, a certain meaning bracket
Although it was good, in recent years it does not go so, a polite finish is required,
Usability is a product of Rubber, so it is easy to process with Cutter, and even if it fails it is not too regrettable
I think that it is good, because it is a product that is unlikely to be surprising, I am gratefully using it,
Depending on the ingenuity, you can use a variety of things The last time I used it for anti-vibration Rubber, but it works well.
There is something useful if you have it.
View detail
I think that it is necessary parts for OEM-like Custom.
【Purchase motive】 In order to change Brake hose before and after FAZER to Osage Edge line, I tried OEMHose and Edge line before replacement work, so I found out what I needed to match the thickness of OEM Clamp and purchased it.
[About installation]
Cutter cut the center part and pinched Hose. Even if you do not need glue etc. on the part you cut, there is no particular problem as it is clamped by Clamp.
【About Hole Size】
Because the thickness of Hose is 7 mm, 7. I made it to 5 Millimeter Size. It made this Size so that Brake hose can move up and down together with the movement of suspension.
[Others]
FrontX 2, Rear X 1 this time I thought it was expensive.
I aimed for OEM-style HoseLine so I think that it was good to match well with OEMClamp.
View detail
It is used for CB1000SF. Since the pure rubber was lost unawares, the vinyl tape was stopped and substituted for the rubber tube of a bicycle, but when mesh-hose-izing, it used in the article store, having discovered this. It is the touch which ap
It is used for CB1000SF.
Since the pure rubber was lost unawares, the vinyl tape was stopped and substituted for the rubber tube of a bicycle, but when mesh-hose-izing, it used in the article store, having discovered this.
It is the touch which appearance may feel refreshed.
View detail