Reviews
It can be easily converted to Rajpon.
[How is it used?
I used the existing Brake hose as is to fit a Nisshin radipon from an OEM Horizontal TypeMaster Cylinder.
Was the one you received as per Image?
The hose itself is a stainless steel mesh hose, but it can be bent up to 90 degrees in spite of its short length.
Was the installation difficult?
Technically, it is not so difficult, but when installing the hose, the banjo bolt is tightened using a spanner, and since two spanners are used to tighten the bolt while the hose is floating in the air, it was difficult to apply the right amount of force. This time, we used an Air Free Banjo Bolt for easy air venting, so the air venting process was completed in a short time.
How was your experience with it?
Until the actual installation, the Handlebar is set to Quantity:Pair (for Left and Right) I had a bit of anxiety, though, because I couldn't imagine how ExtensionHose would move when I swung it to the It's easier to do something than worry about it As a result, there was no interference anywhere, and the ExtensionHose did not flex too much, so there was no need to worry.
[Included Parts:were they on?
Copper WasherQuantity:1 Set of 4pcs.
[Was there anything that disappointed you?
It is a very useful product, but the price is too high.
I think it was even cheaper when it was first released than it is now.
And for Brembo's Screw Pitch 1.0 ExtensionHose was in the Lineup!
Other items that would be helpful
Installation point and hang:The key is to use the right amount of force when tightening the banjo bolt.
Items to buy together:Brake fluid and an Air Free Banjo Bolt for easy air venting.
Opinions and requests to Manufacturer:Please return to the original price when it was first released! And please bring back the for Brembo!
View detail
It is good.
Used to change oil line
I think it is a satisfactory product with a higher quality than the OEM Separator and the Large change.
The mounting hole is a long hole and can be adjusted so that the hose is in the center.
The only drawback is that it uses a lot of CrashWasher.
View detail
For protection of Stainless Steel Mesh Hose!
Stainless Steel Mesh Hose is attached to the Rear brake of RZ250R.
Hose clamp rubber is installed to protect the hose as it moves up and down.
Rubber is fixed with Tie Wrap.
View detail
Fits: BMW R1200RT, BMW R1200GS Adventure, BMW R1200GS, BMW R1200RS, BMW R1200R
ssk brake hose cover carbon
good buy.great pakaging.exact fit.look nice on bike.real carbon.fast shipping.will buy more more carbon ssk products View detail
สินค้าคุณภาพดี เนื้อวัสดุทนทาน ใช้งานได้นานมากๆ รอบหน้าต้องสั่งมาสำรองเพิ่มอีก รอบหน้าจะสั่งสีเหลืองบ้าง View detail
Fits: YAMAHA BWS, YAMAHA BWS 125, YAMAHA CYGNUS X, YAMAHA Cygnus X NXC-125K, YAMAHA Cygnus X NXC-125N, YAMAHA Cygnus X NXC-125T, YAMAHA GTR, YAMAHA GTR 125, YAMAHA GTR aero, YAMAHA GTR FI
Used for CYGNUS-X Taiwan 5th MODEL.
I like AnodizedParts, so I installed Rear brake cableHolder which is unique to Drum brake cars, and it is under the Crankcase, so you can't see it but it is a hidden fashion. View detail
Kawasaki method of brake branching is smart.
The size of the manifold is compact compared to the OEM size.
It looks neat.
Black anodized aluminum has a good texture, so I think it's a good idea to change to this product when the OEM manifold is corroded.
For an inexpensive part, it is a part that is in a prominent position on the bike, so there is a high level of satisfaction when it is replaced.
View detail
Used in the installation of a mesh hose to a SEROW250
I used it to install the mesh hose to my SEROW250
It's a nondescript Rubber I hope it's a little cheaper
Banjo cut in with Scissors, combined with a Hose that can't be removed I tightened it up with Tie Wrap and then installed it on the car body So far it hasn't come off
View detail
ACTIVE Hose Clamp Rubber
I want to share a review about the purchased product. This is the rubber hose clamp from ACTIVE. After replacing factory brake hoses with new reinforced hoses on which there were no rubber clamps. The old rubber clamps turned out to be very large. And I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. The goods are of excellent quality. Quick installation. I recommend . Thank you . View detail
ACTIVE Hose Clamp Rubber
I want to share a review of the purchased product. This rubber clamp from the company ACTIVE for brake reinforced hoses, which I bought for my SUZUKI. After the replacement of the factory brake hoses, new reinforced hoses appeared, on which there were no rubber clips. I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. Goods of excellent quality. Quick installation. I recommend . Thank you . View detail
ACTIVE Hose Clamp Rubber
I want to share a review of the purchased product. This rubber clamp from ACTIVE for brake reinforced hoses. After the replacement of the factory brake hoses, new reinforced hoses appeared, on which there were no rubber clips. I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. Goods of excellent quality. Quick installation. I recommend . Thank you . View detail
From OEM's Separator from here
Used for ZrX1200R
Compact than Large Type Separator such as OEM
It also looks GOOD
For Custom-oriented people, we recommend exchanging with Brake hose
View detail
ACTIVE Hose Clamp Rubber
Hey . I want to share a review about the purchased product. This is the rubber hose clamp from ACTIVE. After replacing factory brake hoses with new reinforced hoses on which there were no rubber clamps. I had to buy new rubber clamps. When I received new clamps, I immediately put them on my motorcycle. Everything went well and perfectly fell into place. The goods are of excellent quality. Quick installation. I recommend . Thank you . View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Large I'm satisfied..
OEM Product's 4 way Joint was expensive, just purchased as we were selling with Wa Big with good Timing!
Unlike Joint of Second Type Model, Joint of this Type does not interfere with the installation of Light Bracket at the lower part.
View detail
For GOODRIDGE's Brake hose
I installed it for Brake hose of GOODRIDGE. I applied CRC from Brake hose's Connector, screwed it in and attached it. I used 5 sets for 1 Set for 1 Vehicle with 7 mm inner diameter and 14 mm outer diameter. It is Just fit.. View detail
To protect Mesh hose
【What made you decide the purchase?】 price
【How was it actually used?】 Favorable. It is also durable.
【Was it difficult to install? (Hard parts case)】 Banjo is hard to pass through as it is
【Please tell me the point of installation and hang (in the case of Hard parts)】 It is good to put a split.
[Is there anything I was disappointed about?] None.
【Hope for Manufacturer - Please let me know if there are any improvement points; I wish I had a bargain or a Clamp attached
【Have you compared items?】 None.
[Others]
Inner diameter 6 for Stainless MeshBrake line. We used 5 mm. As it is
Because it is hard to pass through Banjo, insert it like OEM Product. The gap of division is
A little out, but Hose outer diameter 6. 5 Rubber inner diameter 6. 5 So almost Exactly.
Just my Hose is One-off "Stainless mesh hose not covered"
So, it is Exactly, but the "Tube - protected one" that is well circulated is
I think that the gap of quota will be increased.
If you are interested in forcing Banjo through (Would you pass? W) , Motorcycle ya
It might be better to get Hose to Rose once.
View detail
This is a hose clamp rubber produced by GOODRIDGE, sold by ACTIVE. Inside diameter is 7.5mm, outside diameter is 14mm. As the picture showing, I used it as a clump rubber for the rear brake hose. The item is originally circular cylinder
This is a hose clamp rubber produced by GOODRIDGE, sold by ACTIVE. Inside diameter is 7.5mm, outside diameter is 14mm.
As the picture showing, I used it as a clump rubber for the rear brake hose.
The item is originally circular cylinder shape. So I cut a side and cover the brake hose.
This portion I put the clamp should be movable as pulling a chain otherwise it hooked the brake hose and damage it. Fortunately this rubber clamp is able to create enough clearance to the brake hose to move freely.
Like... even though I fix the brake hose by the clamp rubber really tight, if I loose the screw to release the clamp when I want to pull the chain, then the rubber moves, the brake hose won't be damaged.
For this GOODRIDGE hose clamp rubber #GR31, I give ★★★★★ (five stars rating).
I feel secure with this item which can keep and protect the rear brake line.
View detail
Such components are saved truly. It is exactly, pure management is made to the size of a pure clamp, and it is satisfaction. Although the hose of the buildaline was used this time, I think that a direction to unite with the diameter of a hose more
Such components are saved truly.
It is exactly, pure management is made to the size of a pure clamp, and it is satisfaction.
Although the hose of the buildaline was used this time, I think that a direction to unite with the diameter of a hose more exactly has a 6.5-mm good type.
Although two pieces were due to be used from the first, since it came by one piece on the bottom of a lake satisfactorily, one more piece was used for contact prevention with a swing arm.
In addition, it is attached and made to a hose, without cutting, if it is before attaching a banjo.
It is recommended.
View detail