Reviews
Mechanical is nice, isn't it?
I wish I could attach it to RCB's radipon...
I bought it because I thought it was a good idea.
The hydraulics are not very good… and the standard ones are not very flattering… either.
Of course, it could not be attached as it was, but it was fortuitous that it could be done with a simple modification.
I just didn't expect to need additional parts. By the way, the shaft collar with 8mm inner diameter is Quantity:2pc. Set was required.
View detail
A necessity for driving on public roads.
Brake switch required when using Racing radialMASTER on public roads.
It requires dexterity and subtle adjustments to install small parts, and you must be able to devise a way to use the device when it does not work well due to individual differences.
Since it is a Mechanical Switch, if it is attached properly, the Brake will turn on without fail and there is no discomfort in lever operation.
View detail
Sensitivity is good.
I used it on my brembo clutch and it was very sensitive and made it easy to turn the cell without having to grip the clutch. View detail
In addition to replacing the rear brake hose.
I replaced it when I replaced the rear brake hose.
I did not use the Electre Tap that came with it.
The footpeg area has been Refreshingly improved?
View detail
I bought it for a radiphone from F. Landor, so it's not an option.
Purchased for the brembo copy of Fu Landor's Rajapon.
The thickness of the lower part of the pivot shaft is different between brembo and landor. I thought about heating the collar and inserting the collar, but it would be inconvenient to do that when changing the lever.
And BodyBody also has a different size than brembo?
Maybe I should have bought the M8 or M10 13mm washer, but I didn't have time, so I shaved off a little bit of the body with Grinder and installed it. It's very easy to use.
View detail
Hydraulic Brake Switch haters need it.
Installed on a pseudo-flavored Landor Radial master & omega;
There is almost only a Copy product, and this mechanical contact Brake Switch Kit of for Brembo also comes with, but because the kit itself is made by Third Party and it is a half forced flavor, some small processing is indispensable.
You could have done it as a homemade DIY project without using the kit itself, but ω
It is good to apply Screw Lock to the Base plate style aluminum plate located under the Lever after temporary assembly and tighten it moderately because Lever's movement will become reluctant if you tighten it too much!
The mechanical contact brake switch that comes with the kit is two steps lower in quality than the Honda OEM product, so it's better to put it together as a spare.
The Plate of Gold that is attached to the lower part of the DialAdjuster of the Lever is not usable with the Aluminum Collar that comes with the Kit because the diameter is too small.
I think it's much easier to use and has a wider range of adjustments than a miscellaneous homemade DIY product.
View detail
Switch saying that there is a feeling, I do not mind.
I used it for diverting Brembo radial of net for Race to STREET.
There was a rumor that there is a feeling to enter Switch, but I do not feel it in particular.
Although I used it for 5 years, durability was also no problem.
I think that disconnection will not occur if proper processing of Wiring is done.
You can expect much better durability than loading Micro switch etc.
If there was only one difficulty, it was somewhat late to turn on.
As there is nothing compared to others, it may be just an individual difference.
But in the past it was 10,000 yen, but it is half price now.
Of OEM Witch for brembo's commercial car model MODEL, as well as domestic MASTER
Switch is quite expensive, so at this price you can use
Ali will be the choice.
View detail
Brake switch
The installation itself is not so difficult, but it was a little troublesome because it would require adjustment. It looks good if Bolt of Lever pivot looks a little bit better using Bolt. View detail
I bought it for brembo Radio Pong.
I bought it because the Brake switch of brembo Rapon has broken.
Installation is not too difficult.
However, there was a Point where Switch does not work when adjusting Brake position.
It now works when you adjust using Tie Wrap.
It's a shame just because the price is cheap.
View detail
[Webike Monitor] It was used for the Radial pump master cylinder made from FRANDO of Taiwan instead of the brembo. In attaching, some parts needed to be exchanged, but it is the completion of wearing somehow. Since an operation is also satisfacto
[Webike Monitor] It was used for the Radial pump master cylinder made from FRANDO of Taiwan instead of the
brembo.
In attaching, some parts needed to be exchanged, but it is the completion of wearing somehow.
Since an operation is also satisfactory at a low price at the object for the
bremboes, we can recommend you.
View detail
[Webike Monitor] Before , although the Type put with a Banjo bolt was used, since it had broken, it purchased. The comment with which it equipped are the impressions that a reaction is also good and texture is also high. Durability is the pleasure aft
[Webike Monitor] Before
, although the Type put with a Banjo bolt was used, since it had broken, it purchased.
The comment with which it equipped are the impressions that a reaction is also good and texture is also high.
Durability is the pleasure after using from now on.
When managing by a dissatisfied point having hard lead wire, if disconnected, there was the uneasiness ..
View detail