Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R
I thought it was meant to be a dress-up?
[How is it used?
Used for daily Riding.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
It is not difficult, but it took a lot of time to remove the OEMKnock Pin and it is covered with scratches. I think the removed OEMKnock pin is not reusable.
How was your experience with it?
The OEMDisc Rotor is not a part that can be used all the way to the end, but it is not a part that can be experienced.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It is not a Large Parts, so only those who know about it will notice it.
Other items that would be helpful
Installation Point or hang OEMKnock Pin should be pulled out well. Tightening Torque Management 。 /Instruction Manual's No・Easy to understand ◯/Cautions It is better to replace the Rotor when it is new than to use it after it is worn out /Items to be purchased together None/Opinions and requests to Manufacturer Silver anodized would be good
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R
Use the outer perimeter of the DISC neatly.
It is for Z900RS but I used it for Ninja 1000.
Double disk is Quantity:2 Sets, 4 in total are required.
SUNSTARPremiumRACINGdisc, RKMega Alloy XPad, and Normal caliper.
DISC is 300?, the same as NORMAL, but with a little extra circumference.
1.5mmOffset allows Pad to be applied without excess.
Brake's performance is thermal capacity, so there is no such thing as increased performance. It just eliminates the excess.
To install, remove the NORMAL Knock Pin. Insert the unused Bolt and rotate it between the pliers to remove it.
Once the Knock Pin is removed, install this product and put Caliper back in and you are done. It is very easy.
The material is machined aluminum, so the price is a little high, but it is a product that will satisfy your needs.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R
A little outward.
This collar can be used to offset Caliper to the outside. It is easy to install as it is properly aligned. If you put a flashy color on it, it will have a strong presence. .... View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R
shine subtly
The Disc Rotor can be used right up to the edge.
Gold shines casually
Installation is easy, but be careful as it is a Brake.
The OEM Pin is a little hard to pull out.
If you are concerned, leave it to PRO.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R
Also available in NINJA1000
Can I use it since it is the same Caliper as the Z900RS?
I tried it and was able to install it without any problem.
Simply remove and replace the NORMAL Aluminum DaWellPin.
Maybe it is because the NORMAL's are aligned with the Pedaldisc, but when I replaced them with SUNSTAR discs, I can see that they are not in contact with the outer edge of the disc by a little over 1mm.
If you want to apply Pad to the outer edge of the Rotor......then it is Recommendation.
It does not improve performance.
View detail
MT-09SP with 320disc for Suzumbo STYLEMA
In conjunction with changing the front brake master cylinder of the 2021 MT-09SP to brembo φ17, the recommended piston diameter seems to be φ30 (4POT), so I used this Offset collar for the New Model GSX1300R HAYABUSA. So, we used this collar for Z900RS as an offset collar to install bremboSTYLEMA108Pitch for New ModelGSX1300R HAYABUSA.
The general Brembo calipers have a dent for the knock pin for positioning, but since the Suzumbo is flat, the Fork side is convex, and the Caliper is flat or concave with an 11mm offset. I found this color for Z900RS, and since the bolt is M10, I thought that the size of the Knock Pin would be the same.
*DISC diameter is the Offset amount for 320disc for R1.
The diameter of the Caliper side is perfect, but the Fork side is not compatible with Stages, but there seems to be no problem with the functionality.
When I was looking for the CaliperOffset collar this time, my main thought was that I would like to see more WITHOUT Gloss options, because the color of Black stands out when it is glossy.
And I didn't know how many pieces are in 1Package, so in case of Double disk, this product is Quantity:2pc. Set required
*After ordering because it was quite inexpensive, I was curious and looked it up and found out it was for One Side, so I ordered more.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R
Depending on the Pad you are using.
The first thing to mention is that this product is 1 for Caliper, so you need 2 pairs for Z900RS. I am a little bit uninformative.
This product moves the Offset of the Brake Caliper 1.5mm outward to eliminate the excess space per Rotor.
The magazine that featured Brembo caliper SE when it was released said that the SE caliper has a larger offset than the standard caliper, so the effect is the same as having a larger rotor diameter, etc. lol.
If so, then this product is even more effective than that. lol.
When actually installing it, I thought that at the time of visual inspection, there was no more than 1.5mm left at the edge. I thought that the excess of 1.5mm was not enough at the time of visual inspection.
However, the Brake Pads I currently use are zcoo, not OEM.
The zcoo makes the Rotor generate a black film, so you can clearly see where it is being used and what is left over. The actual measurement is about 1.2mm. (In the photo, the rotors look rattly, but it is because of the black coating and there is no difference in wear when you touch it with your finger. The mileage is 4000km.)
When actually assembled, the pad seems to be flush with the outer diameter of the Rotor, but in reality, the Rotor has chamfers on its corners, so the pad is slightly excess on the chamfers. This is not good.
I would like to use this product for a while and see how it hits the Pad and consider whether to cut off the unused portion of the Pad or stop using this product.
Of course this is not OEM Brake Pads so it is a matter of my personal responsibility.
However, if there was a product with an Offset amount of 1mm instead of 1.5mm, I would prefer that.
As such, non-OEMPad users should check the actual surplus before deciding if they need this product or not. It means that not everyone can be recommended.
View detail