Reviews
ZX-6R Fitment
About quality and texture : Machine work is nice with a good appearance About the feeling of use: N/A Products to buy together N/A Difficulty of installation : This does not fit the a 2019-2023 ZX-6R. This unit has multiple problems, the axle diameter is oversized at 27mm, rather then 25mm required for the ZX-6R. The anti-rotation arm to engage the swingarm lug is incorrect. If you align it centered on the axle, then the arm in angled up rather than being horizontal with the lug which will not allow movement backward and forward. If aligned on the lug, then the axle hole approx 10mm higher than it should be and about 5mm to far back. Cost performance and comparison with other products About shipping and packaging: Good Any concerns, cautions, or advice when purchasing: Don't purchase!!! Wasted money. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX636
Fitment Issue
About quality and texture : Machine work is nice with a good appearance About the feeling of use: N/A Products to buy together N/A Difficulty of installation : This does not fit the a 2019-2023 ZX-6R. This unit has multiple problems, the axle diameter is oversized at 27mm, rather then 25mm required for the ZX-6R. The anti-rotation arm to engage the swingarm lug is incorrect. If you align it centered on the axle, then the arm in angled up rather than being horizontal with the lug which will not allow movement backward and forward. If aligned on the lug, then the axle hole approx 10mm higher than it should be and about 5mm to far back. Cost performance and comparison with other products About shipping and packaging: Good Any concerns, cautions, or advice when purchasing: Don't purchase!!! Wasted money. View detail
Fits: HONDA CBR600RR
Complete design error
I installed the pad on a '07 model, but due to an obvious design error, the mount position of the brembocncCrab caliper is 5mm outward gap compared to the OEM disc diameter of 220mm, and the pad protrudes when installed as is.
The disc diameter of 230mm is not so common, and the only way is to shave 5mm off the disc contact surface of the pad and forcibly fit the pad to the disc.
There is no Caliper center, and the center must be adjusted by placing a Shim between the Mount section.
At any rate, it is not a Level product that can be sold.
View detail
ZX636-2019 Rear caliper support
Mounted on ZX6R-2022
First of all, the diameter of the Axle Shaft is completely different! The angle of the Swing ArmCaliperStopper is too large for the Axle Shaft to fit through.
I managed to install it, but the Brake Pads were about 1cm outside the surface of the Rotor ….
Dangerous because it is a Brake round!
View detail
Fits: HONDA Rebel 500, HONDA Rebel 300, HONDA Rebel 500, HONDA Rebel 300
ABS error.
I bought it from a private importer before WEBIKE handled it.
The ABSSensor warning light always comes on around the 100 km/h mark.
It seems that the ABSSensor mounting position is gapped enough to be visually confirmed.
I ended up replacing it with OverRACING's (or rather waiting for it because I was on a production waiting list and couldn't get it) and the problem went away.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA YZF-R25
Does not fit the former yzf-r25 with upright Fork.
Bolt of Caliper support interferes with OEMfloater.
It is not possible to cover the back of the Support with a washer as per the Support installation instructions.
The images in the Instruction Manual are also too small and white-black, which is the worst because it is hard to understand.
I will repurchase per Large person and OverRACING.
If you have been able to install it, or if you have the correct method, I would be grateful to know.
View detail
Fits: YAMAHA YZF-R15, YAMAHA YZF-R15, YAMAHA XSR155, YAMAHA MT-15, YAMAHA XABRE, YAMAHA V-IXION R155, YAMAHA XSR155, YAMAHA MT-15, YAMAHA XABRE, YAMAHA V-IXION R155
Mr. BigRotor? Missing?
When actually installed, the Brake Pads are not aligned enough to hit the Brake rotor.
If it was a BigRotor, it would work, but did I receive the wrong one for the BigRotor? I bought a brembo compatible Caliper from another place and it was useless.
View detail
Fits: KAWASAKI ZRX1200
There were no color options.
There was no color choice, so I ordered Silver Anodized Finishing, but received Black.
And the delivery time was over a week late. Even if I returned it, I had to peel off the color myself to use it because I had to wait for it to come back in stock again.
View detail
Fits: YAMAHA WR250R
It was a fake Brand product.
I bought it because it was a Hahn Wheel product, but it was a disguised Manufacturer product.
I had it returned and returned Gold, but I have my doubts about WeBig's response.
? First, I pointed out that Screws were cut in all four holes of the Caliper support, making it impossible to install.
→New items arrive.
? He pointed out that the new product was just a Drill rubbing the wrong Screw cut area and no Anodized Treatment.
→This product is racing parts. They are not defective as long as they are functional."
? About the scratches on what should be a new product.
Within the scope of →Product Spec.
? We contacted Hahn Wheel directly and found out that it was a counterfeit branded product.
→To be honest, the packing style of products varies from manufacturer to manufacturer, and there are many products that do not have a brand logo, etc., or that are similar to the packing style of this product, so we have not checked the products as you have described.
Customers who have already purchased the product will be notified and will be able to return the product for a refund.
View detail
Fits: HONDA CBR600RR
Defective product. It was a design error. I can't believe you put this product out into the world.
Defective product. It was a design error. I can't believe you put this product out into the world.
First of all, the height of the screw receptacle for the ABS speed sensor does not match the OEM. I had to prepare a 5mm collar by myself to install it.
Also, when I tighten up the shaft to the specified torque, I can hear the set screw of the blanket and the speed sensor pulsar rubbing against each other. The OEM blanket has a 1mm protrusion on the wheel side, but this product has a flat wheel side, so I think the height is not enough.
View detail
Caliper and Rotor outlines are hit. It becomes impossible to run.
Rotor outline hits Caliper. Not this one! View detail
Fits: HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR50, HONDA NSF100, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR50, HONDA NSF100
It's not rigid enough.
If you are breaking from the straight end of the circuit, and if you are leaning even a little bit at the entry, the caliper support will creep and you will die from the strong large vibration.
I don't think you'll feel any negatives if you don't have a short cart course in the low 20's or a large speed in town driving.
… Or maybe it's wrong to put Brembo caliper on NSR50 or NSF100 in the first place.
It's my fault that I bought a brembo for my moped Base, not the product.
View detail
Fits: YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA NMAX
Too much accuracy
The KN standard makes NMAX the bad guy for the variations in accuracy of NMAX, but I'm putting this on 99% of you say you don't get the Center
Because the Center does not appear on the side that cannot be adjusted by Spacer, you need to remove the Support side measure
At least if it's not accurate on the other side, I can adjust it with Spacer..
I'd love to see some improvements
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI ZEPHYR400χ, KAWASAKI Z750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI GPZ1100
I got the wrong item
Described in the product description as Color black
Silver has arrived
unworthy of recognition
The system is inadequate
The same product has an S and B at the end of the item number, presumably the color number, and the product description says that both colors are It is listed as Black
I don't trust him at all
I want to see what's going on
View detail
brembo bracket kit
I have been miss lead this item does not include calliper and the price charged is absolutely ridiculous ! a bracket essentially for inc import duties £345 never again when I looked at item again although there is a picture of calliper with bracket kit very miss-leading be careful View detail
Interference Large, Processing Large
To say that it corresponds to 220 mm disc, Caliper slightly interferes with Floating pin depending on disc.
(Us, SHIFT UPSHIFT UP made EURO MOTARD Wave Disk Rotor 220 mm is used).
Also, if it is replaced with Thailand OEMAluminum Wheel, it interferes with the Wheel spoke part unexpectedly.
Spec. Large machining is required for vehicles of the vehicle, please be careful when purchasing.
View detail
SE12J CYGNUS X
CYGNUS 260 mm Brake rotor of SE 12 J : Purchase for OEMCaliper installation.
As Caliper grips only 1 cm around Rotor, Brake Shu deforms : Rotor deforms and the effectiveness of Brake becomes ineffective later.
Therefore, even if you replace Brake Shu, it is ineffective and danger Large
For a new Rotor exchange, purchase NCY's Support : Installing.
Exactly - Great.
Japan Manufacturer is less pitiable than Taiwan Manufacturer for bad product production.
Please take care about riding CYGNUS.
View detail