Reviews
Aluminum is concerned about strength
For putting the new Crab on the ZX-14R
Iron, Stainless, or Titanium is better in terms of strength, but in any case, it is cheaper.
View detail
It can be installed in a good way.
I will refreshing it without forcing it to bend and install it.
* Video:FZr MEETING
View detail
Material:Material on the Caliper side of Aluminum:Banjo bolt in Aluminum.
Since the caliper side is aluminum, we replaced the OEM steel banjo bolt with an aluminum banjo bolt to prevent thread galling due to electrical corrosion when replacing the brake hose.
Since it is GOODRIDGE compatible, OEM's NORMAL could be used, but replaced with this product for the above reasons.
Since it is a product of a proper manufacturer, there are no problems with thread accuracy, quality of anodized processing, etc., and it can be used with confidence.
View detail
Air Free Banjo Bolt is the only choice on the MASTER side, even if it is expensive!
When I have owned a vehicle for more than 20 years with a disc brake, I always change the banjo bolt on the MASTER side to an air-free type when I replace the brake hose with a mesh type because the difficulty level when bleeding air is reduced by a large amount.
I was able to easily pull out the Air that is stuck in the MASTER side, which is difficult to pull out, and the work time was reduced to a LARGE width.
View detail
Titaniumium Banjo Bolt Installation
[How is it used?
Installation of Brembo caliper
Was the one you received as per Image?
It has a sense of luxury.
Was the installation difficult?
it's simple
How was your experience with it?
There is a sense of quality
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
for Brembo
The banjo bolt was also changed in order to replace the caliper with brembo. View detail
JA55 Left hand Brake for mounting
JA55 Left hand Brake purchased for installation
I was able to install it with no leaks.
View detail
Used for GALESPEEDBillet Axial Caliper
Used to install GALE SPEEDBillet caliper.
Necessary parts for integrated Breeder/Hose installation.
Double/single use depending on h-type brake hose routing.
CaliperBlackI wanted to create a unified look, so I chose P1.00Black.
We considered other companies' products, but the combination made by Active and GALE SPEED is a safe choice.
View detail
Stainless Steel is safe
I chose stainless steel to match the black brembo. The color was not pure black, but it was a nice combination of colors. View detail
Good Design
Replaced from NORMAL during CaliperOH.
Caliper Fixed Bolt also Material:We replaced it with Titanium, which gives a more unified look to the Design.
View detail
Banjo bolt for ACPerformance line installation
[How is it used?
Street Riding.
Was the one you received as per Image?
Yes.
Was the installation difficult?
Installation of the Horse is difficult, but installation of the Bolt itself is easy.
How was your experience with it?
It worked fine.
[Included Parts:were they on?
2 Washers as per photo.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
18-20Nm with Torque wrench as instructed in the Point of installation and hang/ACPerformance line.
Availability and clarity of Instruction Manual/No
Note/The Size is different from the Adapter in the ACPerformance line, so this one will be tightened with a Torque wrench using a Socket here.
Items to buy together/Torque wrench, Socket.
Opinions and requests to Manufacturer/There are not many choices of Banjo bolt in Gold, so I appreciate it. I hope you will continue to sell them in the future.
View detail
ER-6F Ethos Design Aluminum Banjo Bolt Single
[How is it used?
Used to install the ACPerformance line, and while it was hard to find a Double in Gold, Ethos Design was selling it, so I bought a Single to go with it.
Was the one you received as per Image?
Yes.
Was the installation difficult?
Bolt itself is normal.
How was your experience with it?
Looks a little more glamorous.
[Included Parts:were they on?
Two Washers.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
The kit for the Point and hang/ACPerformance line is 13mm, and this one is 12mm. Therefore, it is necessary to change the socket of the Torque wrench.
Availability and clarity of Instruction Manual/No. Naturally so.
Note/As above, if you make a mistake and turn it at 13mm, you will lick it.
Items to buy together/A set of tools.
Opinions and requests to Manufacturer It would be nice to have Stainless Steel Gold.
View detail
Gold banjo bolt for brake hose installation
[How is it used?
Used to install Brake hose for ACPerformance line.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It is not difficult if you can install a Brake hose.
How was your experience with it?
Red and Blue are a bit too obvious, so I went with Gold, which eliminates the cheapness of the Gold attribute of the OEMBrake hose.
[Included Parts:were they on?
Two Washers
[Was there anything that disappointed you?
None in particular
Installation Point or hang
No instruction manual is provided, but I think that is to be expected.
Note:Torque for tightening is 18Nm as described in ACPerformance line.
Items to be purchased together with Molybdenum grease (as per Instruction Manual of ACPerformance line)
Opinions and requests to Manufacturer I appreciate that there are few Gold in other companies, but Material:Stainless Steel should also be available.
View detail
SWAGE-LINE Swage line Rail position banjo bolt
I installed it on a GPZ900R A11 Normal caliper.
I have no problems at all with the quality and Size.
View detail
trust
There are many inexpensive banjo bolts on the market, but I chose the reliable Swage line because I didn't want anything to happen to my brakes when I was on the road. I have used them on two of my motorcycles and have had no problems, so I am satisfied with them. View detail
Banjo bolt with Wiring hole
I purchased this bolt because I am going to change the pitch of the banjo bolt to change to a Brembo caliper.
The surface treatment of Anodized was also well done, and even when Torque was applied with Wrench, there was no color flaking of Anodized and it was finished beautifully.
The hexagonal head has a hole for wiring to prevent loosening and was wired with 0.8mm Stainless Steel Wire.
Circuit runners will also be able to use it with confidence.
View detail
Spec. change to match the hose
Oil cooler hose, changed banjo to make it a little thicker.
I made it thicker because I thought the higher the Oil flow rate, the better it would cool.
Normally, it seems that M6Type is often used, and we replaced it with M8Type in order to reduce losses as much as possible.
Anodized is also Beauty.
And it's cheap. So I ordered it right away.
Furthermore, there was a possibility of purchasing additional items the other day, so I checked the inventory and found that they were no longer carrying the product.
So, since there was no point in waiting for a product that wasn't there, I looked into it.
https://www.webike.net/sd/23865070/
If this is the next purchase in the same size of Silver, is this it? I thought, "If I buy this next time in the same size in Silver, it will be this one.
However, however, it seems that they have resumed handling the product.
Good, good.
View detail
For Suzumbo
Szumbo is bad.
I bought it because it is difficult to bleed air out of the suzumbo.
View detail
It's done right!
Installed in conjunction with the conversion of the brake master.
I chose Red to match the Red color of the car body.
View detail
Brake Disc conversion!
I bought this product because I decided to disc the Drum brake. The price is reasonable, the color is cool, and it is as expected from Swage line. View detail