Reviews
MASTER.
[How is it used?
Purchased a new OEM hose because it is not long enough to replace the Master Cylinder.
The OEMHose is a little short, so if you use an external master like brembo or GALE SPEED, it is not long enough, but if you use an extended VERSIONBolt, you can use it as is somehow, but the angle is a limit, so it could crack and break at any time.
Large front brake, so do not let your guard down!
Was the one you received as per Image?
Usual quality
At first I think it's made in Japan, but when I looked it up, it's a United Kingdom brand, so it's full of luxury!
Stickers are also included in the package, so you can quickly attach them to the car body!
Was the installation difficult?
Can be difficult if you're a beginner.
When removing the hose, be careful not to spill the Fluid!
If you put it somewhere, it will discolor or corrode quickly, so please prepare water before proceeding.
How was your experience with it?
as expected (as opposed to expected)
Soft and easy to angle
Nothing in particular that I think is wrong.
Just for reference.
Master Cylinder:GALE SPEEDVRC
Hose length:I bought 285mm, but when I installed it, 260mm is also enough, so I recommend 260mm.
In line with this, Active's Flare block adapter" should also be purchased in conjunction with the required
[Included Parts:were they on?
Sticker
[Was there anything that disappointed you?
I don't have it!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
VERSIONBolt is not included.
View detail
Compact
Used 635mm on ZX10R (19) to install new Crab, just the right length.
The structure is simpler and more compact than the Edge line, which was previously used.
The Crimp section is shorter than the SuEdge for easy handling.
However, the Black part is shiny and not good, so I might have preferred the normal Stainless.
The texture of BlackStainless and the MachineMachine-like appearance of the Edge are better, but I have heard rumors that it leaks a lot.
If I had to choose by functionality, it would be Goodridge.
View detail
Left Side also
Purchased this one along with a Front caliper replacement for a New Model GSX1300R HAYABUSA.
Quantity:Pair (for Left and Right) Quantity:I purchased 2pcs and here is the Left Side imprint.
The OEM was not long enough and the angle of the VERSIONBolt was different, so it had to be replaced.
However, it is not just a Hose replacement that can be used.
Caliper needs to be replaced→Hose needs to be replaced→Flare block adapter also needs to be replaced
A series of "↑" gold-dropping flows are required lol.
The old GSX1300R HAYABUSA does not have ABS, so as long as the hose from the master cylinder is replaced, it can be used as is,
For the New Model, the handling of the FrontHose has changed.
Apart from the hose from the Master Cylinder, there is a Gold hose from the ABS modulator and a Quantity hose from the ABS modulator.:2pc divided.
Therefore, first of all Flare bu Lock adapter. must be purchased.
・ Flare bu Lock adapter. https://www.webike.net/sd/24651726/Part No. FM10AN3T
Next, does the length vary by Caliper? I think they're probably the same, so here's a reference.
・Quantity:Length without 2pc Hose and Versionbolt:335mm*Quantity:2pc
But Hose alone is definitely not enough, so I purchased several Adapters below together in my case.
・https://www.webike.net/sd/1540510/ [Brake Fitting Adapter]. M10→AN3/8*2 for Caliper
45 degree Adapter
Well, there is not much information on the New Model GSX1300R HAYABUSA, so you will never know unless you try it yourself, but if you fail, your Gold will be wasted, so I will tell you everything I know and hope you will find it useful.
Next, I was a bit attracted to this product itself, especially since it has a Yellow color Tag?
Accuracy is not bad, but Quantity:I bought 2pcs, and one of them was leaking Fluid from the joint when pressure was applied, even if I tightened it from the beginning. But when I tightened it firmly one more time, it stopped leaking. I think it was because I didn't tighten it all the way to the back from the beginning after all. It has nothing to do with the quality of the product!
View detail
Looks good to me.
Purchased this one along with a Front caliper replacement for a New Model GSX1300R HAYABUSA.
The OEM was not long enough and the angle of the VERSIONBolt was different, so it had to be replaced.
However, it is not just a Hose replacement that can be used.
Caliper needs to be replaced→Hose needs to be replaced→Flare block adapter also needs to be replaced
A series of "↑" gold-dropping flows are required lol.
The old GSX1300R HAYABUSA does not have ABS, so as long as the hose from the master cylinder is replaced, it can be used as is,
For the New Model, the handling of the FrontHose has changed.
Apart from the hose from the Master Cylinder, there is a Gold hose from the ABS modulator and a Quantity hose from the ABS modulator.:2pc divided.
Therefore, first of all Flare bu Lock adapter. must be purchased.
・ Flare bu Lock adapter. https://www.webike.net/sd/24651726/Part No. FM10AN3T
Next, does the length vary by Caliper? I think they're probably the same, so here's a reference.
・Quantity:Length without 2pc Hose and Versionbolt:335mm*Quantity:2pc
But Hose alone is definitely not enough, so I purchased several Adapters below together in my case.
・https://www.webike.net/sd/1540510/ [Brake Fitting Adapter]. M10→AN3/8*2 for Caliper
45 degree Adapter
Well, there is not much information on the New Model GSX1300R HAYABUSA, so you will never know unless you try it yourself, but if you fail, your Gold will be wasted, so I will tell you everything I know and hope you will find it useful.
Next, I was a bit attracted to this product itself, especially since it has a Yellow color Tag?
Accuracy is not bad, but Quantity:I bought 2pcs, and one of them was leaking Fluid from the joint when pressure was applied, even if I tightened it from the beginning. But when I tightened it firmly one more time, it stopped leaking. I think it was because I didn't tighten it all the way to the back from the beginning after all. It has nothing to do with the quality of the product!
View detail
JA55 Left hand Brake for mounting
JA55 Left Hand Brake (Rear) Purchased for mounting.
I purchased 1235mm, but 1210mm would have been fine if I could have worked out how to handle it,
Stainless Steel Mesh Hose for a Direct feel.
Right hand Brake when the opportunity arises. (Front) I would also like to replace the
View detail
The work itself is
The exclusive design of the car model allows for smooth installation.
However, as mentioned in the Instruction Manual, if Molybdenum grease is not applied at the banjo bolt, the fluid will seep and leak.
I read the Instruction Manual and installed it as is, thinking that it would be large and sturdy without grease, but the fluid leaked.
I had to rush out to buy Molybdenum grease.
We recommend that you prepare Molybdenum grease when you buy it, because Grease is not included.
View detail
While changing the MASTER
JC92.OEMSwing Arm, brembo new Crab lower side, once UTurned forward like OEM, it was just right.
I am very happy that I was able to buy it at a low price on Sale.
View detail
Single-push 3-pod conversion.
Piston not used in D-CBSCancellation has been restored.
Normal master for 2-piston, so Lever's Stroke has increased, but controllability is better.
View detail
You can choose the length appropriate for your condition.
*Selected the shortest distance because I used 3 bottles and forgot the length already.
[How is it used?
Quantity on the front of vehicles not equipped with ABS:2 pcs (h-type), 1 pc used for Rear
Both are thought to have been used for more than 6 years and 60,000 km, but no records are kept, so the exact values are unknown.
I am almost always in Touring Maine, and rarely in the Shop.
Brake fluid is ACTIVE 4.0 or 5.1
Was the one you received as per Image?
Simple connection with Hose as per Image.
Compared to SWAGE-LINE, this product has a stiffer connection, which is why I prefer it.
Was the installation difficult?
I think I bought a slightly shorter hose because it was a Rear Sets, but I don't remember, so it may have been OEM.
I think I replaced the handlebar with a shorter one when I had my R25, because I replaced the handlebar with Daytona's Universal Product and lowered it, but I don't have a record of it, so I'm not sure.
As for Front, I made a rerouting that once extended from the OEM mid-branch to Caliper, but I don't think I stumbled upon anything.
For Rear, the troubles in routing were not difficult to overcome, as it mimics the OEM's fixed position and routing.
I think the air venting was generally a hassle.
I think it was easier to install the Adapter because the tip of the hose spins around, so I felt like I had to decide on the angle of the Adapter before fixing it in place.
How was your experience with it?
I've seen a lot of talk about Brake being tightly, but it wasn't particularly subtle enough to make a difference.
While deterioration of rubber parts in various parts of the vehicle is noticeable, unlike OEMHose, there are no rubber parts, which provides a sense of security against deterioration.
Stainless Steel, but the fear of snowmelt attack has not changed that much.
[Included Parts:were they on?
Hose only. Necessary Banjo, Adapter, and Fluid must be purchased separately.
[Was there anything that disappointed you?
None
Quantity everything for vehicles:There are set products on the market, but I think the advantage is that you can buy what you think is best suited to the condition of your vehicle. For some reason, almost all of them are black, but only some Adapters are made of normal Stainless Steel, so there is a high degree of freedom.
The product itself is a robust product that has been running for a number of miles and years with no apparent problems yet.
View detail
If only the hose is Stainless, there is not much change, but … to Refresh the appearance.
The front brake hose bolt on my DRZ400sm K9 that I bought from a private seller on Yahoo auctions was so corroded and uncomfortable that I bought this hose first and installed it in anticipation of replacing it with a Brembo caliper.
Frankly, the Touch feeling with Snap is scarce as it is with OEMCaliper.
Of course, compared to the OEM rubber hose, the initial feel of the hose is stronger, but when you grip the lever deep down, it feels like it's biting the air. I'm not sure if I'm biting air or not, but it's a bit of a whiff.
We have tried three times to bleed the air, but little has changed.
According to a mechanic at a motorcycle shop that I sometimes visit, if the size of the master is not increased, the soft fee rings will not change.
I was happy with my replacement because I wanted to at least keep it looking nice for now.
The work itself is not particularly difficult, so if you are doing the work yourself, please be sure to take care of Torque control and air venting.
View detail
Fluid is slightly blotchy….
I wanted to make the crossover type of Swage linePRO into an h-shape and shorten the hose length as much as possible, so I purchased this GOODRIDGE 160mm and 310mm hose and a T-shaped 3-way Fitting Adapter.
However, I was so traumatized that I could not remove the air from the OEM Master Cylinder, and I wanted to reduce the air removal work as much as possible, and I was tempted to remove the Caliper and wash it in the washroom. I wanted to reduce the amount of air venting work as much as possible. (It was too expensive and the quantity was too high).:2pc. Set can't be bought either, so only 1 pc. …)
However, due to the fitting, it was not possible to make the "h" shape, which was the original goal, and the 310mm Hose and 3-way Fitting Adapter were not used.
The installation was completed without any difficulty, and after bleeding the air, we went for a test run to confirm that the brake was working properly.
When inspecting the Hose area after the test ride, is the Hose fitting on the underside of the Stoveli wet?
At any rate, I wiped it off that day and checked it about a week later and found that the fitting was still wet, so it might be Overtorque, but I retightened it and left it again.
I gave up because the Fluid still oozed out of the Fitting.
*I think it's usually NG, but it's not like it leaks, it's more like it seeps, so I always inspect it before driving.
At first, I was afraid that it was leaking from Stoveli, but there was no Fluid adhering to the Connector, and Fluid was adhering from the Fitting of the Hose connected to the Stoveli, and it seemed to be slightly seeping from the Fitting on the Caliper side, and after driving, the Dust seemed to be adhering as shown in the image. After driving, it seems that dust is adhered as shown in the image.
The Swage line installed on the upper side of the Stove top is not seeping, so I would like to change it to theirs, but the minimum hose length is 20cm even with Easy order, so I would like to leave it as it is for a while, and if the symptoms worsen, I would like to take measures.
By the way, I used this GOODRIDGE Hose on another vehicle and it never bled, so I'm sorry to hear you pulled a HaGap.
View detail
neat and tidy
The brake hose became thinner and refreshed. The Brake may have started to work slightly earlier. Is it my imagination? View detail
All black looks tighter!
[How is it used?
I used it on my XJR1300C. Handlebar is DAYTONA RCM with antlion Handlebar Post.
The Handle position is lower and narrower than NORMAL.
Was the one you received as per Image?
The stainless black color looks tight and fits the atmosphere of the vehicle.
Was the installation difficult?
It is not difficult if you can bleed air.
How was your experience with it?
It originally came with Stainless from the Swage line, so the performance aspect is honestly no different.
Touch is also unchanged.
However, the Fitting section is now much SMART and looks better.
[Included Parts:were they on?
See second image.
[Was there anything that disappointed you?
I think the T2Type is a little bit messy in terms of the parts to be branched from MASTER.
I would like to see a 2WaySeparator (sold separately) as standard equipment.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X, YAMAHA CYGNUS X
tightly
Necessary and sufficient compatibility with Brembo caliper No problem with installation View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Satisfied
I bought this to change from OEM to brembo.
Everything you need is included.
Only the angled banjo adapter needs to be repurchased.
I would be Large satisfied if I could select and purchase the angle of the banjo adapter.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
No mistake:??
I bought this to change from OEM to brembo.
Everything you need is included.
Only the angled banjo adapter needs to be repurchased.
I would be Large satisfied if I could select and purchase the angle of the banjo adapter.
View detail
Easy to install and helpful
Replacing a 25+ year old Earls mesh hose with a new one.
I purchased the Kit for my car model.
Hose in NORMAL and Earls was a Type that branched off in the middle, but the one I purchased is a Type that takes out Double from MASTER.
It doesn't seem to necessarily follow the NORMAL handling.
So the handling of the hose is quite loud, but the quality is high and I am satisfied with it.
Lever touch feels a little softer due to the double output.
View detail
Fits: KAWASAKI Z900RS CAFE
Bolt On for each car model is a relief.
Touch is great, too.
The installation is perfect in length and banjo shape.
View detail
I'm satisfied
This is my second purchase of this product! I've seen many mesh hoses that look like they've been customized, but this one is my favorite because it's simple and doesn't stand out too much.
It is good that not only Aluminum but also Stainless Steel can be selected.
View detail
Touch improvements were grasped.
Braking distance could be shortened. Performance Improvement Items I'm not, but Brake's Touch is closer to my taste (Brake's Touch has a preference, so I dare you to try it). Better." (I will not write "I am not a member of this group.")
Since it is used for W650, it is inevitable due to the characteristics of the one-effect 2 Piston Caliper. Let them grip and make it work." It tends to be the Touch of Brake in the direction, but this is not my personal preference, and I wanted to tend to stand up and go from the initial movement.
The Caliper structure has not changed dramatically, but it is much closer to my favorite Touch than the Rubber hose in NORMAL.
Also, since it is a smoked hose with a stainless steel fitting, the brake hose does not make a statement, and it blends in nicely.
View detail