Reviews
JA55 Left hand Brake for mounting
JA55 Left Hand Brake (Rear) Purchased for mounting.
I purchased 1235mm, but 1210mm would have been fine if I could have worked out how to handle it,
Stainless Steel Mesh Hose for a Direct feel.
Right hand Brake when the opportunity arises. (Front) I would also like to replace the
View detail
soft
HURRICANESpiral Tube
Item Number : HB6801W
Fits Cable Diameter Φ5-8mm
Total length 2.5m Color:Milk White
Soft and easy to use.
I use it wrapped around a SWAGE-LINEStainless Mesh/Brake Hose.
View detail
ACPerformanceFront Brake Hose Kit
I chose this product because I wanted to improve the appearance and brake performance of the front area! I also changed the handlebar, so I chose a length that took that into account. The appearance has changed enough, but I don't think the brake performance has changed that much because I am an amateur. (^^) Maybe those who understand it can feel it? View detail
The work itself is
The exclusive design of the car model allows for smooth installation.
However, as mentioned in the Instruction Manual, if Molybdenum grease is not applied at the banjo bolt, the fluid will seep and leak.
I read the Instruction Manual and installed it as is, thinking that it would be large and sturdy without grease, but the fluid leaked.
I had to rush out to buy Molybdenum grease.
We recommend that you prepare Molybdenum grease when you buy it, because Grease is not included.
View detail
ACPerformance lineRear Brake Hose Kit
I bought this product because I wanted to change the appearance of the suspension and improve the effectiveness of the brake. As I expected, the appearance of the parenthesis improved considerably, but I did not feel that the brake effect had changed by a large amount, since I am an amateur! View detail
If Handlebar and Riser are both NORMAL high, this is the one to choose.
The RedBlueSilverHose that was popular a long time ago was attached, but was replaced because it started leaking from the Crimp.
The clutch sides are now unified with the same material and feel good.
Length batch.
It is a life-threatening component, so if you cannot do it yourself, you should take it to the Shop.
View detail
Maybe a little longer.
The length is so long that it is kind of unsettling. I feel like it could be 5 cm longer. View detail
Fits: HONDA NSR80, HONDA NSR80, HONDA NSR50, HONDA NSR50
I just need to install it for now.
NSR50 is now assembled from the frame. I have a 40mm long swing arm, but I think I can use the OEM length kit. But I don't know if it is the same for the handling. All installation is done by Quantity:I have not used it yet, so I don't know if it is controllable or not, but I have used this series on other cars, so it should be fine. View detail
Improved front brakeTouch feeling
[How is it used?
I had to remove the OEM ABS from my MINICircuit Running and needed a new brake hose, so I consulted the shop and they recommended a dedicated part. We chose this one.
Was the one you received as per Image?
Banjo bolt is beautifully BlueAnodized and looks good when installed.
Was the installation difficult?
I asked for shop work, and the machine operator also said the quality of the construction was excellent!
How was your experience with it?
So far, I'm satisfied.
[Included Parts:were they on?
Sticker included, to be attached to Cowl
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Naturally, the front and rear brakes are installed at the same time.:I would be happy if you could lower the Cost a little by selling Sets.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125
Replace the Rear Brake Hose with a new front brake hose.
[How is it used?
I had to remove the OEM ABS from my MINICircuit Running and needed a new brake hose, so I consulted the shop and they recommended a dedicated part. We chose this one.
Was the one you received as per Image?
Banjo bolt is beautifully BlueAnodized and looks good when installed.
Was the installation difficult?
I asked for shop work, and the machine operator also said the quality of the construction was excellent!
How was your experience with it?
So far, I'm satisfied.
[Included Parts:were they on?
Sticker included, to be attached to Cowl
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Naturally, the front and rear brakes are installed at the same time.:I would be happy if you could lower the Cost a little by selling Sets.
View detail
BlackGold color.
Hose was also replaced while the Release was replaced.
If you want to unify the handlebar area with black color, this is the only choice for you.
Nowadays, there are cheap Chinese Hoses that are similar, but the way they are made is completely different and I am 100% satisfied.
Don't forget Fluid when you replace it. dot4 bought it.
View detail
Slim Hose is Refreshing and ◎
I like that the hose is thin and refreshing to handle. View detail
Installation is Large
It took a total of 5 hours and I would not recommend a beginner to operate it on their own, the BoltDesign on the Caliper side was poor and very difficult to tighten, there was no obvious change in the feel of the Brake, the only difference was that the Brake was very tight, the Caliper side was very tight and the Caliper side was very tight. View detail
Fits: SUZUKI LS 650 SAVAGE F, SUZUKI LS 650 SAVAGE P
No need for hassle as it is a compliant product!
Brake hose was replaced due to age-related deterioration!
Since the OEM Product brake hose is no longer available, we simply popped in a compatible product that requires no effort!
The touch feeling of the Brake has been improved and BrakeControl is easier!
View detail
Fits: APRILIA RS250 (Aprilia)
BrakeTouch drastically changed, for Stainless MeshFR
I had a hard time with the OEM rubber hose, because the clearance between the banjo bolt of the Master Cylinder and the Fork was too narrow, and I had a hard time with the hose routing etc. The OEM brembo horizontal MASTER might not have been so difficult. I had to cut the handlebar right and left many times to check the interference and tensioning. No Fluid leakage and no problem. View detail
Fits: APRILIA RS250 (Aprilia)
RR side doesn't show much difference in fee rings, but aligns with FR.
One of the troublesome parts of the RS250 is the RR Brake fluidReserver tank in the Seat Cowl. The stop-lamp switch was replaced with a pressure type when replacing the rear sets, and connected with a watertight connector. View detail
Instruction Manual makes it look like a quick and easy attachment, but it is not.
The Instruction Manual says that the Radiator area will use the existing brake line, so it will not be a full mesh, but it is necessary to train each part to prevent fluid splattering, as well as to remove the tank and air cleaner box, Radiator displacement is a must. The most difficult part of the Large model is that it is difficult to apply wrench due to the shape of the bracket on the Radiator side. I won't go into details, but you will definitely have a hard time.
Bottom line, leave the installation to the PRO. If you want to do it yourself, you will probably find it easier and faster to use ABSUnit's total replacement product, which is Full Mesh.
View detail
I always use it
I use it all the time, I think it is the best cosmetic product. View detail
Fits: KAWASAKI SUPER SHERPA
Bolt On by Limit Car Type
I purchased a SUPER SHERPA specific Brake hose for front and rear.
Banjo angles are not good, both front and back, like NORMAL.
It was impossible to install Hose in Line.
One more thing, you can specify the color of the hose, but the Banjoetc.
The color of the bracket cannot be specified, and the colors of the front and rear banjo are different,
There is no unity.
Is this how it is with out-of-print for-vehicle parts management?
But I managed to attach it and it's not inferior in terms of functionality,
I am going to use it for this.
View detail
While changing the MASTER
JC92.OEMSwing Arm, brembo new Crab lower side, once UTurned forward like OEM, it was just right.
I am very happy that I was able to buy it at a low price on Sale.
View detail