Reviews
Clutch becomes lighter
I installed it on New Model GSX1300R HAYABUSA.
In fact, this time we are replacing VRD, also by GALE SPEED. replacing VRD to VRC from higher MODEL to Standard model may sound strange, but there are actually various reasons.
First of all, I was attracted to this VRC the moment I received it and opened the box. It looks like a work of art indeed, and just looking at it raised my Tension and made me feel that it was worth the high price.
I think it beats bremboRCS just for the smooth surface treatment. To be honest, I don't understand why brembo's RCS is so popular. I used to be a brembo RCS fan, and I used to think that no matter what kind of motorcycle I switched to, I would first replace it with brembo's RCSMASTER.
However, I felt the quality of brembo's forging was not worth the price. I was tired of that, so I chose GALE SPEED's Vine VRC this time.
Back to the story, I first went for the VRE feel and went for the bright black VRD for Cost considerations, but I quickly gave it up and went with this VRC because it looks like RCS and I felt something was wrong with it. I am usually a Touring Maine, so I can't tell the difference between VRD and VRC! Still, I chose it because of the way it looked. If that's what you enjoy, then that's fine.
Finally, after installing it and running it for a bit, it feels very good - lighter than the OEMClutch, and a little bit better at 17.5mm.
※※※※ Note ※※※※
New Model GSX1300R HAYABUSA will change the clutch master, [Hill HoldControlSystem will not be available.
The reason is that with the OEM clutch switch, if the clutch is released for a moment, the switch returns, the ECU recognizes that the car is starting, and the rear brake is released. However, with the external clutch master, the switch remains pressed until all the clutch is released, so the car is not detected as starting, the rear brake remains on, and even if the Axel is turned, the car does not move forward! This is very dangerous. I would like to see any Manufacturer solve this!
↑ It may be a little confusing, but try it yourself, it will never start!
In my case, I have turned that function off.
View detail
I'm glad I went with VRC.
I purchased this VRC when I replaced my GSX1300R HAYABUSA with a MASTER. In fact, this time, it is a replacement from VRD, also by GALE SPEED. replacing VRD to VRC from higher MODEL to Standard model may sound strange, but there are actually various reasons.
First of all, I was attracted to this VRC the moment I received it and opened the box. It looks like a work of art indeed, and just looking at it raised my Tension and made me feel that it was worth the high price.
I think it beats bremboRCS just for the smooth surface treatment. To be honest, I don't understand why brembo's RCS is so popular. I used to be a brembo RCS fan, and I used to think that no matter what kind of motorcycle I switched to, I would first replace it with brembo's RCSMASTER.
However, I felt the quality of brembo's forging was not worth the price. I was tired of that, so I chose GALE SPEED's Vine VRC this time.
Back to the story, I first went for the VRE feel and went for the bright black VRD for Cost considerations, but I quickly gave it up and went with this VRC because it looks like RCS and I felt something was wrong with it. I am usually a Touring Maine, so I can't tell the difference between VRD and VRC! Still, I had to choose based on looks.
Finally, after installing it and running it for a bit, it feels very good, I feel the VRC is sufficient, I don't really need VRD or VRE except for Race.
We recommend this VRC over RCS! You will never regret it!
View detail
Installed on New Model GSX1300R HAYABUSA
[How is it used?
First installed on a 2023 GSX1300R HAYABUSA!
The OEM MASTER was too big, tacky, and too hard to grip, so we replaced it with this one.
I have always used BREMBO, but the moment I saw this VRD for the first time, I was attracted by the beauty of the forging and Quantity of this product!:Pair (for Left and Right) Both were purchased.
Even though I have always been a brembo guy, I tried GALE SPEED for a while and it was surprisingly good!
Was the one you received as per Image?
The box is yucky and full of luxury.
A little more expensive than a brembo box? The feeling that the box was a bit more expensive than brembo's box was already conveyed to us before we opened it.
So the first impression is the best!
Was the installation difficult?
It was a bit complicated to install on the GSX1300R HAYABUSA.
If you want to use OEMHose as is [30MM]. I need an extended Banjo adapter. That would save me from having to buy an OEMHose. Nice savings!
How was your experience with it?
While the OEMMASTER is 19mm, we chose this 17.5mm.
The reason is that the OEM Caliper Piston is 30mm*P4, so 17.5mm is the most suitable size. 19mm is fine, but the grip is not so comfortable and hard, so 17.5mm is better. Please choose this size for your GSX1300R HAYABUSAOwner.
[Included Parts:were they on?
Stickers, Instruction Manuals, etc. I don't want to put Stickers because, frankly speaking, they are too flashy. I don't want to put Stickers because they are too flashy, to be frank.
[Was there anything that disappointed you?
Not particularly, I guess. Just expensive, from my friend's point of view, it's like lower than brembo:.... But this one is higher up!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It would be great if it came with a Switch.
View detail
Progressive Braking
Installed on my 2005 Spec III with Brembo P2 (34) rear caliper. Breaking is now progressive compared to the liner feel of the stock pump. Highly recommended to pair it with your Brembo product! View detail
Quality item, function & looks
I use this rear master on all my motorcycles, not only does it work great, it brings that finished touch to the motorcycle. View detail
A Master Cylinder that is Far and Above any other Master Cylinder on the Market
When I received this item yesterday and opened the box I was amazed at the sheer stunning good looks of the product as well as the excellent CNC machine and finishing work that went into making this master cylinder. This is a master cylinder than should be the benchmark for all others to follow. Not even the coveted Brembo master cylinder can hold a candle up to this work of art. The Japanese really know what it means to put your heart and soul into making a product that other companies can only dream of making. Of course no review would be complete if no mention was given to Webike for running one of the smoothest operations in the business. Super fast shipping and excellent transaction everytime. Keep up the good work. View detail
Cool, I like the Touch feeling.
I bought a brembo 11 pi but the screw holes were too narrow (40mm) and I couldn't install it. It looks cool and I feel that the range of Touch is wider. View detail
excellent
Hello everyone, this is a good product and I recommend it to everyone. This is 100% original, you can buy with confidence. also easy to install View detail
excellent
Hello everyone, this is a good product and I recommend it to everyone. This is 100% original, you can buy with confidence. also easy to install and more light View detail
Excellent control, difficult to remove air
The NORMAL Master Cylinder was old and difficult to control, so I replaced it with this product, which is a little more expensive. I don't know if it is because it is 14mm or not, but I couldn't bleed air by myself, so I brought it to Motorcycle shop. I don't know the cause of the problem, but I was able to finally use it. View detail
Solid Product
Since the details are kind of lacking, here's what you get; -The rear cylinder, -The mounting tab, it rides on the rail and is drilled for M6 -Stiffer Red Spring -Bigger diameter fluid inlet, if you want to up the diameter of the reservoir tubing It's a piston, not much to say about it. The quality is as you would expect from Galespeed, excellent, especially compared to the cast iron rear MC's that other companies sell. The fact you can get adjust the distance of one of the mounting points is ingenious, and with a bit of finagling I'm certain you can even adapt this MC to be used as a thumb brake, given you have a thumb brake assembly and a fitting push rod to replace the M6 rod it comes with. View detail
Replaced with Crab type Brembo
I have a bitter memory that when I replaced only the Caliper on my CB, the Rear did not work at all.......
With that in mind, I switched to Gail's Rear master, which was developed with Target in mind for the new Crab.
Whereas NORMAL works with gusto from the beginning.
Crab+Gale has Stroke, but it is easy to control Touch that works well for Linear.
I'm not very good at driving downhill on mountain roads, so I used to activate the ABS on the rear wheels, but maybe this will help me control it better!
View detail
Replaced with Crab type Brembo
I have a bitter memory that when I replaced only the Caliper on my CB, the Rear did not work at all.......
With that in mind, I switched to Gail's Rear master, which was developed with Target in mind for the new Crab.
Whereas NORMAL works with gusto from the beginning.
Crab+Gale has Stroke, but it is easy to control Touch that works well for Linear.
I'm not very good at driving downhill on mountain roads, so I used to activate the ABS on the rear wheels, but maybe this will help me control it better!
View detail
Piston size was changed to match brembo M50.
Front caliper of Z1000R-EDITION is brembo's M50
The size of MASTER recommended by brembo for Caliper is 17mm.
And yet, for some reason, the OEM NisshinMASTER comes with a 19mm.
I thought it was a tight-fitting Touch.
That's why I decided to change the MASTER.
Candidates are brembo and GALE SPEED
GALE SPEED is still a weak Brand establishment, for better or worse.
brembo is the only way to go. But in terms of functionality, GALE SPEED has the edge.
bremboRCS with two-step ratio adjustment
Gale VRC is 8-Stages adjustable in 0.25mm increments
Well, once you've made up your mind, it's rare to move it, but it's so much nicer to be able to fine-tune it, isn't it?
GALE SPEED for the navel-gazers who only use navel-gazers who hate the standard.
I also heard that brembos tend to pee their pants a little bit, and I didn't want to be hit by one of them.
The touch is soft and the stroke is a bit much, but the brake is effective and easy to control with two fingers.
When 18mm is set, it is transformed into a tight touch, but it is controllable and does not have the tightness of the OEM.
I ended up settling on a 17mm intermediate.
I honestly didn't expect it to be this good, so I think I made a good purchase.
I wonder why Kawasaki adopted 19mm.
It has nothing to do with functionality, but I think the texture of the MASTERBody varies a lot from individual to individual.
The quality seems to be inconsistent, with some pieces having smooth surfaces and others having textured, dirty surfaces.
View detail
Brake master for fine-tuning and experiencing the touch of your choice
[How is it used?
Mainly city driving + Touring
Was the one you received as per Image?
The black body is more than expected and can be installed around the front without any discomfort.
Was the installation difficult?
Installation was left to a Motorcycle shop that I am familiar with.
How was your experience with it?
Originally VRC 17.5 (18-16) I was using
OEM Caliper (30・32) brembo from (30・34) I just changed it to
I bought this one because it was softer.
You can calculate the Size in advance on the GALE SPEED website.
19 (20-18) 19 instead of (18-16) I chose the
As a result, 19 (20-18) But was it good though it hardened? I thought so.
I thought the above size would have been one of the candidates as brembo also has it.
However, the range of adjustment is 19 (18-16) seems to be more dominant.
The touch and the sensation when gripping are based on numerical values only.
I think it depends on the Manufacturer.
[Included Parts:were they on?
It came with a Stikeretc.
■
Brake, which I was anxious to feel as I thought it would, started working from the beginning.
This time I had to repurchase due to a Size change, so I wished I had bought this one from the beginning in anticipation of what was to come.
Those who plan to purchase in the future should also consider replacing Caliper and recommend choosing the right size.
View detail
Used for GSX R1000
Installation is relatively easy, but depending on the footpeg, you may need to buy Offset 4mm, but I was able to use 3mm Spacer between the footpeg and the footpeg. View detail
For comparison.
Assuming that Nisshin's Master Cylinder is not available, the cost will be high.
Buy and compare this one too. You have to see it in person to understand.
Since it is around One-offRear Sets, which are fundamentally an in-kind match.
Looking at this and that Size.
Bracket on the original product one can be removed and turned upside down.
This is useful because you can tease out the dimensions. (If not, another Size) !
After some difficulty, the footpeg was attached to the bracket of the footpeg with the Heel Guard installed.
There was a trap in the Size of Banjo bolt, but it was completed.
I managed to Small craft the OEM stop-lamp switch and finished.
Master Cylinder's Spring is on the anti-powerful side.
The pad I have now is mildly effective and the Piston has finally hit the mark.
It is quite good to use. Maybe a little less powerful?
I think you can find your preference in this area in Pad.
Anyway, the size is Compact, and I can hit the Frame, and my biggest concern is that the Frame is too small. [Color] Clear。
If you're struggling with Space issues, it's a good place to start.
View detail
Exactly what I expected.
[How is it used? Touring, city driving
Was the one you received as per Image? Personally, the quality seems better than brembo.
Was the installation difficult? no problem
How was your experience with it? Custom enough to Custom first.
[Included Parts:were they on? Adapter for attaching thin and thick hose sutures is included.
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
perfect cutting process
At first I looked at Brembo’s rcs17 upper pump. Later, a friend recommended the galespeed upper pump to me. They said that it was much easier to use than Brembo. I bought it just in time for the discount. The appearance is Black painting, embellished with red letters, the appearance is very high and the cutting technology is first-class. I'm not mistaken it's very good. -------------------------------------------------- -------- At the beginning, I watched the pump on the RCS17 of Brebo. Later, some friends recommended the GALESPEED pump, saying that it is much easier to use than Breber. I just bought it when I caught up with a discount. Black paint, red letter embellishment, the face value is very high -cut process. I did n't buy it wrong. Powered by Google Translator View detail
Galespeed master pump
Great piece of equipment. Great quality. Gorgeous outlook. Top notch finish and workmanship. Feels great in combination with brembo p2 caliper. View detail