Reviews
Fits: Others Universal, HONDA MONKEY
MONKEY in Custom Prevention of Blur
I am satisfied with the 2-way QuickBrake master and the Quick clutch, with Handle near Refreshing.
It also serves as a custom head-custom for my elderly (nearly 80 years old) self to prevent blurring.
Changed the front end and drum to disc. Changed the Fork as well. All of them were taken care of by Webig.
View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA YZF 1000R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000, MV AGUSTA F4- RR, MV AGUSTA F4- 1078
Fee Ring changes!
Just the fact that I changed to brembo makes me happy!
But when I changed Caliper, it was difficult to feel the Fee Ring change, but Radial brake master changes a lot!
Also, it is better to change the clutch lever to CORSA Corta Lever, which is easier to grip and gives a more unified feel.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA YZF-R25
Fitting is very severe
Purchased to install on a 2019 YZF-R25 (RG43J).
The lever angle of this vehicle is too high for me, so I wanted to adjust and lower it, but the handlebar position is too far forward for a separate handle, and the Horizontal TypeMASTERCylinder immediately interferes with the handlebar, making it impossible to lower the handlebar at all. I bought it for the purpose of adjusting the position rather than the performance.
However, for the reason I mentioned earlier, the Straight shape banjo interferes with the lever when the brake hose is passed through it, so if the angle is increased to avoid this, the lever will now interfere with the cowl when the handlebar is turned to the Left.
In the end, I bought various shapes of banjo, made a tentative match, and finally managed to match them in-kind, "Here." The only way to get to a position and angle that is "right" is to use the "right" side of the needle. The process is like threading a needle. You can do this with "Conform" I wondered if it would be okay to say "yes" to this question. If you say that the product is compatible, please at least attach a fitting diagram for each major car model.
The installation may not be a problem for other types of cars, but for this type of car, the risk is too large for beginners to DIY, so it is better to leave it to the shop.
View detail
Fits: TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR110, KAWASAKI KSR-2, KAWASAKI KLX250SR, KAWASAKI KSR-1, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI KLX250, KAWASAKI KLE400, KAWASAKI KDX250SR, KAWASAKI KDX250R (for competition), KAWASAKI KDX220SR, KAWASAKI KDX220R (for competition), KAWASAKI KDX125/SR, KAWASAKI D Tracker 125, KAWASAKI D tracker, KAWASAKI 250TR, SUZUKI Address V100
Braking power up by 1SizeDown from OEMMASTER
The wife of the owner of the vehicle said that she was afraid of braking due to the 20-year-old OEM Master Cylinder, so we decided to replace the OEM MASTER Overhaul with this MASTER. I also wanted to increase the braking power by reducing the size from the Piston type, so I replaced it with the 11mm Piston type MASTER. (Quantity:Pair (for Left and Right) to 1/2-inches→11mm)
The smaller piston size of the Master Cylinder increases the braking force, but the amount of stroke increases, so a change of about 1 size is recommended.
The MAJESTYC I installed is my wife's Motorcycle, and she has a weak grip, so I had a request to make the Brake a little lighter.
The touch was good, and together with the 20 year old Brake hose, which was also changed to Stainless mesh, the Brake looks very nice.
My wife was relieved to hear that it was easier for her to ride as well.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA YZF-R25
Huge! Big! Short! Fee Ring is not bad.
It is cheap, but this Fee Ring is just radpon!
However, the standard lever is a short lever, which is hard to handle for me as a 4-finger brake user! I replaced it with a standard lever (sold separately), and now I can handle it easily.
It looks, but it's tough! It's huge! It's huge!
As a person who used to prefer the magra195MASTER, I can't get rid of the uncomfortable feeling that it is too big and bulky every time I see it.
If you separate it from functional Parts, I don't think it is a bad thing. I plan to use it for a while.
But I would recommend HC-1 to future buyers!
View detail
Progressive Braking
Installed on my 2005 Spec III with Brembo P2 (34) rear caliper. Breaking is now progressive compared to the liner feel of the stock pump. Highly recommended to pair it with your Brembo product! View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA YZF-R25
It is a convincing product.
I am glad that I replaced the SHIFT UP 4-pot Caliper, because I can now get the best performance out of it.
The price is reasonable, but it is hard on the poor Small students.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA YZF-R25
Is it unavoidable because it is an early lot? The description and the actual product are different.
We are inquiring with Manufacturer & Webike, but here is the difference from the description below.
1.Lever, but different from the product photo. Short lever." It is
It is quite inflected, so be careful of interference with the Switch box.
2.Package mounts are used as they are for the already sold 17/19mmMASTER.
Aside from 2, I have the impression that the model of the car to be installed is SEVERE, since it clearly differs from the picture for 1.
I installed it on my NC750X (DCT) and it interferes with the switch box at about half grip.
I am inquiring about the possibility of replacing it with a regular Lever, as it has enough grip money for city driving.
(I hope it is the same lever as the previous 17/19mm)
The Fee Ring itself is a unique radipon, and the braking force rises in proportion to the grip, which is very pleasing.
View detail
Fits: YAMAHA YZF 450, YAMAHA YZF 400, YAMAHA YZF 426, YAMAHA YZ 250, YAMAHA WR F 250, SUZUKI RMZ 250, SUZUKI RMZ 450, KTM XCW 525, KTM XC 525, KTM XCG 525, KTM SXS F 450, KTM SXS 450, KTM SXS 540, KTM SXS 250, KTM SX SXS 125, KTM SXC 625, KTM SX F 250, KTM SX 250, KTM SX 300, KTM SX 200
Easier to Control
I'm switching from phi;16x16
16Ratio was fluffy and a little hard to ride.
This 18Ratio is very easy to control and easy to ride.
Motorcycle used is XJR1300
Yamaha's Monoblocks are standard for φ16 even for Double
When I see φ19 recommended in Motorcycle shops, I feel that I don't have enough knowledge about it. [You don't know. I can't help but think.
Maybe Caliper is planning to go brembo, too, and I don't blame them.
View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
For Upgrade of front brakes master
Upgraded TRX850 front brakes master with NISSINsemiRadial brake master.
I opened the package and checked the details and it is very QUALITY and the accuracy is perfect!
Installation on the car body is also completely hassle-free, as the product is guaranteed to fit the car body.
The braking feel is completely different from that of the OEM, with braking power rising quickly from the beginning of the grip and very good control after the grip has been applied.
The design of the product is also compatible with out-of-print cars.
The work kill was set as intermediate because the brake fluid had to be drained once and the air was drained again after installation.
Please refer to the following URL to see the installation work as it is uploaded in the diary.
https://imp.webike.net/diary/251725/
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Good looks
I bought a new GSX250R and replaced the tank with a new one, not because there was anything wrong with it, but because I wanted it to look good. I thought it would be cool if the tank was made Radial style. As others have said, when I tried to install the tank, the tank was a little askew and the position of the tank bracket was not quite right. I was disappointed in this point. The installation was easy. View detail
Quality item, function & looks
I use this rear master on all my motorcycles, not only does it work great, it brings that finished touch to the motorcycle. View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
long vowel mark (usually only used in katakana) (>ω<;)
Converted to my son's BALIUSA5, which had an air leak from the MASTER.
I thought about installing the Radial master, but I decided to go with the ZrX1200 DAEG because it is expected to be replaced by the ZrX1200 DAEG next year, so I decided to go with this one for cosmetic reasons.
Tank Separated Type is good for a different atmosphere. (? ・ ・?)
For the price, Touch was fine and a good buy!
However, it may be a little long for Mr. Balius in the standard lever….
It was sticking out of the handlebar, so I replaced it with a short lever. (Polish)
I should have measured the length before purchasing and selected the short lever type lol.
View detail
Fits: KAWASAKI Z1000 (water-cooled), Others , YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP
Inexpensive and easy to handle
Inexpensive and easy to handle. It is a Control property for the amount of grip. View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
Article of good quality
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliable View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
Great!
Replaced an OEM Master Cylinder with a BALIUSA5 that developed an air leak.
The color is Black×Black.
I was relieved to find that the front brake, which does not bite the air, was properly connected to the Snap. (? ・ ・?)
The only problem I have with this vehicle is ….
The tank is placed too close to the HandlebarCenter and may be covered by the Tachometer.
Well, I can just buy a Bracket at Home center and move it to a new location, lol.
I have a shabby blog, if you are interested! (^_^;)
https://enjoy-motorcycle.blog.jp/
View detail
Fits: KAWASAKI Z1000 (water-cooled), Others , YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP
NISSIN Radipon
Motorcycle history of over 20 years, first radipon.
Brake was so easy to use that I regretted not using it sooner.
View detail
A Master Cylinder that is Far and Above any other Master Cylinder on the Market
When I received this item yesterday and opened the box I was amazed at the sheer stunning good looks of the product as well as the excellent CNC machine and finishing work that went into making this master cylinder. This is a master cylinder than should be the benchmark for all others to follow. Not even the coveted Brembo master cylinder can hold a candle up to this work of art. The Japanese really know what it means to put your heart and soul into making a product that other companies can only dream of making. Of course no review would be complete if no mention was given to Webike for running one of the smoothest operations in the business. Super fast shipping and excellent transaction everytime. Keep up the good work. View detail
Cool, I like the Touch feeling.
I bought a brembo 11 pi but the screw holes were too narrow (40mm) and I couldn't install it. It looks cool and I feel that the range of Touch is wider. View detail
Fits: YAMAHA YZF 450, YAMAHA YZF 400, YAMAHA YZF 426, YAMAHA YZ 250, YAMAHA WR F 250, SUZUKI RMZ 250, SUZUKI RMZ 450, KTM XCW 525, KTM XC 525, KTM XCG 525, KTM SXS F 450, KTM SXS 540, KTM SXS 250, KTM SXS 450, KTM SXC 625, KTM SX SXS 125, KTM SX 300, KTM SX F 250, KTM SX 250, KTM SX 144
Don't expect too much, but definitely good stuff.
I installed it on a cbr250rr.
I had installed a Brembo caliper for dress-up purposes, but due to the lack of capacity of the normal master, the lever touch was fluffy and the movement of the caliper piston was too uneven, so the brake was not ineffective but the fee rings were very bad. The Brake did not work, but the fee rings were very bad.
Normal master is 14 pie, so I chose 15 pie.
After the installation, the lever touch is tightly and the unevenness of the brake seems to have been reduced. Above all, the appearance of the Parenthesis is great!
Now, as for the installation, the handlebar, including the reserve tank, should be installed in a Quantity:Pair (for Left and Right) It was a bit strange to find a position where the handlebar would not interfere with anything when fully locked in place, but I was able to fix it in a satisfactory position. Since I had replaced the handlebar with an Over Racing handlebar, there was no precedent or information on the Net, and I was worried, but I was able to manage it.
I was able to install the brake hose on the Swage line with no problem using a 20 degree banjo adapter, and of course I purchased the banjo bolt separately for Brembo 1mm Pitch.
The problem with the Largeest Large is that the cbr250rr has a huge Large switch box due to the electric throttle, and it interferes when the Lever is gripped. This problem was solved by replacing the lever with a Koken AeroLever.
It is a highly rated product on the Net and YouTube, but I think it is a bit excessive to say that it will dramatically change something or that I will never stop being impressed! I think it's a bit excessive to say that it changes something drastically or that I can't stop being impressed. I am glad that I have installed it because I have found a good balance with Caliper.
View detail