Reviews
Fits: YAMAHA MT-07A, YAMAHA MT-07, YAMAHA TDM900, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA FZ8SA, YAMAHA FZ8S, YAMAHA FZ8N, YAMAHA YZF750R7OW02, YAMAHA XSR700, YAMAHA MT-07A, YAMAHA MT-07A, YAMAHA MT-07A, YAMAHA MT-07, YAMAHA YZF600R THUNDER CAT, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA XJR1300, YAMAHA XJR1300
Genuine SBS Rear Brake Pads for Yamaha FZ8
This was a set that I needed to replace the ones I previously had in the bike. I wanted to try and match the rears with the fronts I was purchasing at the same time but not quite as agressive for the rear as it is not used that much on a track day. Not hard to find the right pads for the rear caliper. I used the tools Webike provide and then cross referenced with Yamaha and SBS websites for my own peace of mind. I had a few other parts in my order including the SBS front pads which I was matching with. Because I combine some of my parts into one order, the cost of shipping is a lot cheaper than getting them individually. EMS is who I use these days as they just get the job done fast and efficiently. My order arrived in 5 days from Webike warehouse sending my order. What's not to love about that. The pads came in a shrink wrapped SBS packet and also Webike secured them in a bubble wrapping for safety and to keep my other parts safe from damage in transit. These pads are a road compound but are plenty for a track day as I personally do not use the back brake a lot anyway. They had a good matieral on the pad, plenty of meat on there for sure. They performed very well even though the conditions on the day weakened as the day went on. I was still very impressed with the pads anyway. Great work Webike, very pleased with this purchase. View detail
Fits: YAMAHA XT1200Z SUPER TENERE, YAMAHA XT1200Z SUPER TENERE, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1S, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1 SP, YAMAHA YZF-R1S, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF1000R THUNDER ACE, YAMAHA YZF-R1, YAMAHA MT-10SP, YAMAHA MT-10, YAMAHA FZ-1 FAZER, YAMAHA FZ-1N
Genuine SBS Front Brake Pads for Yamaha FZ8
These were the front pads for the FZ8 and I wanted to try the SBS brand to see how they faired against other brands. Finding the correct pads was not super hard at all. I just went on SBS website and put my make and model in and the options were clear to see. I opted for these street excel sintered as they are pretty agressive pads and should work a treat. The cost was really good value and along with the rear pads for this bike already in my basket, I got them all shipped together with a couple of other small parts. Doing it this way, save a few pounds on shipping too. I use EMS as they just get my orders to me fast and efficiently. 5 days from shipping is all it took which is amazing. The pads and all the rest of my order was packed really well and any empty space was filled with bubble wrap for security of the parts. The front pads came in teh shrink wrapped SBS packet. There was no sign of contaminants or brake dust like you get in some ohter brands. The pads have a very coarse sintered material and hopefully will not take too long to bed in. Fitting in no time as I already had the calipers off and ready to go. Next time out, I will be testing these and edit my review. Great job Webike, thank you. View detail
Fits: YAMAHA FZS1000 FAZER, YAMAHA XJR400R, YAMAHA T-MAX500, YAMAHA T-MAX530, YAMAHA FZ6 Fazer, YAMAHA YZF-R6, YAMAHA MT-07, YAMAHA YZF-R7, YAMAHA FZ8 Fazer, YAMAHA FZ-09, YAMAHA MT-09, YAMAHA MT-09 Tracer, YAMAHA TDM900, YAMAHA XSR900, YAMAHA FZ1, YAMAHA FZS1000 Fazer S1, YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA YZF1000R Thunder A, YAMAHA YZF-R1
Stops better than OEMPad
[How is it used?
Winding 70%.
Was the one you received as per Image?
Yes
Was the installation difficult?
Not difficult.
How was your experience with it?
The same grip as the OEMPad would slow it down too much.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI Bergman 400, SUZUKI Sky Wave 650, SUZUKI Sky Wave 400, SUZUKI Sky Wave 650, SUZUKI Sky Wave 250, SUZUKI Sky Wave 250 Type S, SUZUKI Sky Wave 250 Type M, SUZUKI Sky Wave 250 SS, SUZUKI Gemma., SUZUKI BURGMAN 400, SUZUKI BURGMAN 400, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 SS, SUZUKI SKYWAVE250 Type M, SUZUKI SKYWAVE250 Type S, SUZUKI SKYWAVE250, SUZUKI GEMMA
Good quality and reasonable price brake pad
I installed it on burgman 400(2021) rear brake, it performs exactly what I want. the pad fully activate ABS without unexpected braking experience. No extra annoying noice and expect it would keep my disk be worn out. View detail
Fits: その他 JC125 7B, TGB R50X, TGB Buleet RS50, TGB Buleet RS125, TGB Buleet RR50, TGB 304 Sport, TGB 302 Sport, SUZUKI GX125, SUZUKI GN125H, SUZUKI GN125H, SUZUKI GN125H, SUZUKI GN125, DERBI Terra 125 Euro, DERBI Terra 125 Adventure, DERBI Senda DRD 125 SM, DERBI Senda DRD 125 R, DERBI Mulhacen 125, DERBI Mulhacen 125 4T, DERBI Mulhacen 125 4T, DERBI GPR125 (4T)4V
Mounted on GN125H
Last time with the same product, less than 2mm remained after 20,000 km. (I'm sure there are individual differences in the way one rides.)
There is no gusty Image, and while smooth, the braking is done properly at the timing when you want to stop.
It is a little expensive, but it provides peace of mind.
View detail
Fits: YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper, YAMAHA Brembo P4.30|34 1PIN, YAMAHA P4 caliper
Genuine Brembo Racing Pads for Brembo P4 caliper.
These were a purchase to find out just how well these pads actually perform during track days. I have had different branded race pads before but these are supposed to be the mutts nuts. Having heard a lot of good reviews, finding the correct part for my calipers was not hard at all. I cross referenced with Brembo website directly too. The price of these pads is not cheap but you do get what you pay for when it comes to Brembo and particularly, race pads. I did need a set of pads that could withstand a very high temp and these ones did not disappoint. I had a couple of other small items in my order too which made the shipping pretty reasonable. These pads are not the lightest but the smaller parts were kept nice and safe during transit with all the padding Webike added. The pads arrived safely and upon inspection, I was very surprised to find no dust or contaminants in the packets. They came in the standard Brembo pad packets as always. You know you are getting the real deal when they come in those packets. The pads fitted my calipers really easily, a little free space but just enough not to have to worry about. The pads performed superb during a spirited track day as Cadwell park in the UK. Probably too well if I'm honest as this is a short track anyway. I think the reason some peopel do not rate these pads is that they are not getting them hot enough, these really do need pushing to get the performance they are meant for. These will most definitely be on my list again. Very impressed. If you want some great pads that perform under great stress, get these. View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Replaced at the same time as bremboDisc Rotor
Replaced together with bremboDisc Rotor.
It stops cleanly and has no control issues.
However, when you put it on, you can't tell it's brembo by its appearance.
View detail
Fits: KAWASAKI H2R, KAWASAKI ZX 14 R, APRILIA RS 660, APRILIA RSV1000R, APRILIA RSV1000R Factory, APRILIA RSV4, APRILIA RSV4 APRC ABS, APRILIA RSV4 Factory, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA RSV4 RR, APRILIA Tuono, APRILIA Tuono R, APRILIA Tuono V4 1100 RR, APRILIA Tuono V4 Factory 1000, APRILIA Tuono V4 R, APRILIA Tuono V4 R 1000, APRILIA Tuono V4 RR 1100, BENELLI TNT Cafe, BENELLI TNT R160
Used in place of OEM.
I bought the OEM SC82 Brake Pads and they are very expensive. The thickness of the back plate is different from OEM, but I can't tell the difference.
I am satisfied with the normal use of the product.
They are sold cheaply on the Net, but fakes are also distributed.
I buy from this Site, which is an authorized distributor.
View detail
Fits: KAWASAKI H2R, KAWASAKI ZX 14 R, APRILIA RS 660, APRILIA RSV1000R, APRILIA RSV1000R Factory, APRILIA RSV4, APRILIA RSV4 APRC ABS, APRILIA RSV4 Factory, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA RSV4 RR, APRILIA Tuono, APRILIA Tuono R, APRILIA Tuono V4 1100 RR, APRILIA Tuono V4 Factory 1000, APRILIA Tuono V4 R, APRILIA Tuono V4 R 1000, APRILIA Tuono V4 RR 1100, BENELLI TNT Cafe, BENELLI TNT R160
It's a matter of life and that's why we have BREMBO.
I purchased this along with the Caliper replacement.
I was using an inexpensive pad to begin with, but one day, while riding around town, the car in front of me suddenly Braked just before a crosswalk,
I try hard to Brake back and forth without thinking of myself, but because of the inexpensive Pad, I stopped just short of almost bumping into it or not.
We didn't hit each other, but we were only about 50 cm away from the car in front of us. That's a Large change dangerous. That was a good opportunity for me to never save my life! With that in mind, I bought the brembo standard pad. it is OEM installed on M50M40 and other Calipers, so performance is not a problem at first, and since it is brembo, that is also a relief.
I installed it as soon as it arrived, and when I tried it on the road, I was amazed at the braking power, and I am sure I will be able to stop safely in any case.
View detail
Fits: Others , KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z1000, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI ZX-6R, KAWASAKI ZX-6R
This is brembo!
I didn't like the OEMPad and switched to brembo.
The soft Touch shortens the braking distance and makes it easier to Control. It's a quintessential brembo!
View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Purchased with Rear disk rotor
I bought it together with brembo's rear disk rotor when I purchased it.
I haven't installed it yet, but I have no complaints about the quality and appearance of the product.
I will make an impression when I install it again.
View detail
Fits: KAWASAKI ZX-7R, KAWASAKI Z200, SUZUKI RF900R, SUZUKI GSX600F, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1100W, SUZUKI GSX-R250R, SUZUKI RG250 GAMMA, SUZUKI RGV250 GAMMA, SUZUKI RGV250 GAMMA, SUZUKI RG250 GAMMA, SUZUKI RG250 GAMMA, SUZUKI RG250 GAMMA, SUZUKI GSX-R400, KAWASAKI ZZR1200, KAWASAKI ZX-12R
Nice genuine SBS street sintered pads for GSX-R1100 1987
Having heard a lot of good things about the SBS brand of brake pads, I decided it was time to give them a go on a different model. This bike is one of my own which does brake heavy and thought I would try the street excell sintered ones. Finding the correct part for fitment was pretty easy as I visited SBS website and put my model details in. Webike had these in stock and so ordered 2 sets with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days.All was packed really well and did not move during transit, no damage at all. The pads came in their own SBS branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are sintered you can see teh different materials in the pads themselves, I do believe they have a higher than normal high heat resistance. I have not fitted them yet but that will be in the next few weeks. So far though, they look pretty good. Lets hope they perform as they should. View detail
Fits: HONDA ADV150, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA PCX HYBRID, HONDA PCX150ABS, HONDA PCX160, HONDA PCX, HONDA PCXe:HEV
Buy before and after
Since I was planning to go touring in the near future, I inspected the car in advance and checked mainly the consumable parts.
After checking, I found that there were almost no Brake Pads in both front and back, so I hurried to purchase them.
It was in stock and arrived immediately and in time for Touring.
And because it is made by brembo, the brake also works well. I used to use Red Pad, but when I changed to brembo this time, I decided to use brembo from now on because it is inexpensive but has good performance.
This product is for the front of CRF250.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CBR125R, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA GROM, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI Gixxer 150., HONDA CB150R, HONDA CB300R
Buy before and after
Since I was planning to go touring in the near future, I inspected the car in advance and checked mainly the consumable parts.
After checking, I found that there were almost no Brake Pads in both front and back, so I hurried to purchase them.
It was in stock and arrived immediately and in time for Touring.
And because it is made by brembo, the brake also works well. I used to use Red Pad, but when I changed to brembo this time, I decided to use brembo from now on because it is inexpensive but has good performance.
This product is for the rear of CRF250.
View detail
Fits: BMW F 650 GS, YAMAHA XT660Z Tenere, KTM 660LC4, BMW S1000R, HUSABERG FC550, HUSABERG FC550, HUSABERG FC450, HUSABERG FC450, HUSABERG FC, HUSABERG FC, HUSABERG FC, HONDA SLR650 VIGOR, HONDA NX650DOMINATOR, HONDA FX650VIGOR, HONDA CB S, HONDA CB, GASGAS MC, GASGAS EC300, GASGAS EC250, GASGAS EC200
Reliable Brand
Brembo is now the standard equipment on the upper models, but the red color is very noticeable because of the fine detail on the Brake Pads.
SPMODEL is a product that is not intended for racing, so it can be used on public roads.
The product itself is easy to Control and feels good.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09 TRACER, YAMAHA MT-09 SP, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-01, YAMAHA FZR400RR, YAMAHA FZS1000 FAZER, YAMAHA FZS600FAZER, YAMAHA FZ8, YAMAHA FZR400RR-SP, YAMAHA FZ1-S, YAMAHA FZ1-N, YAMAHA BT1100, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FJR1300 A, YAMAHA FJR1300 AS
Genuine Brembo Racing Compound Brake Pads for GP4RX
These were a purchase that I had made as I was putting the bike through it's paces on the track and wanted something with a little more bite than road pads. Finding the correct pads for the calipers was not particularly hard. I used the tools Webike provide along with cross referencing with Brembo website. The pads were a very good purchase at the time as Webike head some Brembo pads on offer. I had a few other parts in my order and as I do this a lot, combining the items to ship together saved a lot of money too. I used EMS and they got my order to me in perfect condition and with no delay in 5 days from Webike shipping. The order was well packed and heavier items such as these pads were wrapped in bubble wrap to stop them from damaging anything else in my order. The pads themselves came in the standard Brembo pad packaging and were kept nice and secure. They have a stronger and more robust pad material and more heat is needed but when you are on a track, this is not a problem. They did work a little better than teh road version but it was treacherous conditions half way through the day so maybe I did not get all the feeling I probably should've done. Really good pads, these will be on my orders again. Thank you for the pleasant experience Webike. Brillaint work. View detail
Fits: DUCATI MONSTER1100S, DUCATI MONSTER1100S, DUCATI MONSTER1100DIESEL, DUCATI HYPERMOTARD, DUCATI HYPERMOTARD1100S, DUCATI HYPERMOTARD796, DUCATI M1200 S, DUCATI HYPERSTRADA, DUCATI 848EVO, DUCATI 848, DUCATI 800SPORT, DUCATI 749S, DUCATI 749R, DUCATI 749, DUCATI 999S AMA, DUCATI 999R, DUCATI 999R XEROX, DUCATI 999, DUCATI 899, DUCATI 899 PANIGALE
Genine Brembo Rear Brake Pad SP Compound
This was a set that I needed to replace the pnes I previously had in the bike. I wanted to try and match the rears with the front but not quite as agressive for the rear as it is not used that much on a track day. Not hard to find the right pads for the rear caliper, it's a Brembo 2 pot version, pretty standard. I used the tools Webike provide and then cross referenced with Brembo website for my own peace of mind. I had a few other parts in my order including the RC front pads which I was matching with. Because I combine some of my parts into one order, the cost of shipping is a lot cheaper than getting them individually. EMS is who I use these days as they just get the job done fast and efficiently. My order arrived in 5 days from Webike warehouse sending my order. What's not to love about that. The pads came in a Brembo packet and aslo Webike secured them in a bubble wrapping for safety and to keep my other parts safe from damage in transit. These pads are a road compound but are plenty for a track day as I personally do not use the back brake a lot anyway. They had a good matieral on the pad, plenty of meat on there for sure. They performed very well even though the conditions on the day weakened as the day went on. I was still very impressed with the pads anyway. Great work Webike, very pleased with this purchase. View detail
Fits: HONDA ADV150, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA PCX HYBRID, HONDA PCX150ABS, HONDA PCX160, HONDA PCX, HONDA PCXe:HEV
It is a Pad that works softly and is easy to plunge into.
It is an easy-to-handle Pad.
The decrease is surprisingly fast.
View detail
Fits: YAMAHA BT1100, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FJR1300 A, YAMAHA FJR1300 AS, YAMAHA FJR1300, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-6, YAMAHA FZ1-N, YAMAHA FZ1-S, YAMAHA FZ8, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZS1000 FAZER, YAMAHA FZS600FAZER, YAMAHA MT-01, YAMAHA MT-07
When I installed these brake pads, I was very surprised how my motorcycle could slow down. delivery was very fast. View detail
Fits: Others , Others , DUCATI M900, DUCATI M750, DUCATI M400, DUCATI 916STRADA, DUCATI 900SS, DUCATI 750SS, DUCATI 748, APRILIA RS250
It is also used in Circuit.
It is not a type that is as effective as the Red Pad, which has been sintered, so it is not likely to be easily choked.
The absolute braking power is not as good as ZCOO or Metallica, but the control is excellent.
As for durability, it will not last as long as the 2Brand I mentioned before because it will decrease more than expected.
View detail