Reviews
RG250γ ('83) I bought it for
We purchased an item with RG 250 γ 83-84 for GJ 21 A 111 - 00 ***. Although the installation method is described as wDirect, how to connect with wDirect is about 5-10 cm Length is insufficient. Since it can not be returned goods because it can not be returned, I used it as it is from the Master cylinder to the junction of the OEM, and connected from junction to Caliper with this product.
Thanks Brake hose is tremendously surplus.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Can not be installed
I removed the Suspension and installed the Kit but it was not easy to install until now but it can not be installed because the suspension will interfere after attaching it. It is the worst because it is not written in detail in Instruction Manual or item description. View detail
Fits: YAMAHA YZ125, YAMAHA DT230 Lanza, YAMAHA TT250R Raid, YAMAHA TT250R, TRIUMPH T955 DAYTONA, YAMAHA DT200WR, TRIUMPH SPEED TRIPLE S, SUZUKI Bergman 400, TRIUMPH BONNEVILE, SUZUKI Jebel 250, SUZUKI Sky Wave 400, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250, SUZUKI RMX250 S, SUZUKI RM125, SUZUKI RM250, SUZUKI DR250SHE, SUZUKI DR250S, KAWASAKI KX250
Limited to only focus on durability
About 5,000 km after installation.
Aggressiveness to Rotor was also low, I was surprised that the reduction of Pad was less than I imagined, but I do not know what is different from Red Pad except it.
Initial braking is also effective on the braking surface, but the braking force does not rise further.
Red Pad had a similar impression, but this Pad is somewhat terrible.
Rain etc. etc. And when Rotor is wet, I feel that the braking power drops very much.
The reason for low evaluation is not suitable for me.
Red and HYPERSintered never buy nor use it again.
I think that it is good for those who care about durability and Cost by leisurely driving.
View detail
Bankruptcy lost
I replaced it from the OEM I thought it would not work and it got no longer effective
I cleaned up Caliper and replaced Fluid, so it was better to skip over Maintenance and it was better than OEM at that time
I do not have the braking power like the equivalent OEM, it is inferior to OEM at all
For the time being, you can use it for Rear,
Or if there is anything Pad can afford to hold down Motorcycle with Braking system - - -
I think that those who have such a motorcycle will not buy this - - -
Can you Recommendation to the last friend of Review and laughed
Single disc If you decide to use it for a car's Front and I recommend you
It's supposed to have murderous intentions
View detail
Uh huh
For the first impulse of this hand, I will add a Minus rating.
There is a similar product made by PLOT in the Large Merchandise store, but I feel I understood its meaning.
First, impressions on opening.
"Making is complicated" "Packing is also complicated"
Banjo department? The surface has Wound, there is irregularity, it did not look like it can be used as it is, but believe in Manufacturer, wearing. As a result, it leaked out.
Exchange Washer (Aluminum, copper) I tried it, but it still leaked out.
With Oil stone, it is 30 minutes to level, finally to be able to withstand practical use.
Result ... time taken for crashable Washer 18 pieces, scattered Fluid (Crying) If I think about it, I should obviously buy a PLOT made.
(Of course it is a story that they will break in about a year ...?)
There is no problem at the moment for Switch operation etc.. Durability is unknown, but if you break it I would like to buy another product.
It looks amazing. I like it more than PLOT. Also, the included Banjo bolt is cool (Lol)
View detail
By car model ??? Bolt-on ???
Because the angle of Banjo bolt is different from OEM, installation on MASTERCylinder side is bad Parenthesis - - -
On the Caliper side, unlike the OEM, it is a straight type, but it interferes with the Fender.
It is necessary to process Fender or purchase Banjo bolt separately.
For the time being, I applied pressure to the Fender and attached it by deforming it.
There is no doubt that it is bad for Hose.
I wonder if this is a Bolt-on by car model ???
Although I exchanged and tried running, Brake 's Touch felt improved, but worked with Caliper' s Overhaul at the same time, it was originally better to replace the old car 's OEMRubber hose, better?
View detail
Interference Large, Processing Large
To say that it corresponds to 220 mm disc, Caliper slightly interferes with Floating pin depending on disc.
(Us, SHIFT UPSHIFT UP made EURO MOTARD Wave Disk Rotor 220 mm is used).
Also, if it is replaced with Thailand OEMAluminum Wheel, it interferes with the Wheel spoke part unexpectedly.
Spec. Large machining is required for vehicles of the vehicle, please be careful when purchasing.
View detail
Fits: YAMAHA TOWNV80, YAMAHA TOWNV80 T80ED, YAMAHA JOG Zr "18A, YAMAHA JOG R "18A, YAMAHA MATE T50ED, YAMAHA MATE T50D, YAMAHA MATE, YAMAHA MATE T50D, YAMAHA MATE T50C, YAMAHA MATE T50C, YAMAHA MATE T50, YAMAHA MATE, YAMAHA MATE T50, YAMAHA TOWNV80, YAMAHA TOWNV80 T80D, YAMAHA TOWN MATE 50, YAMAHA TOWN MATE 50 T50, YAMAHA JOG, YAMAHA MATE T50ED, YAMAHA CYGNUS 125 Si
Same as Chinese Cheapest Item ...?
Although I was using Brake Shoe purchased at less than 300 yen, it is bad crying and its effectiveness also works against a suddenly and it is hard to use and it is terrible squeaking anyway
And since Shoe was sticking, I exchanged it
Look at the items that I received ...
Engraved together ... shape together ...
Maybe the same product ... ??
When…
Shoe image Left less than 300 yen
Right Side is PFP's Shoe
It is impossible for 2000 yen to be fixed price
I bought it because it was cheap this time ...
But it may be different material and so on ...
I tried to exchange it
Crying is terrible
No matter how much you did chamfer it was useless
If you scrape the surface, it fits to a certain extent but also it recurs again
If it is the same product, what extent is added at the package fee - -
I immediately exchanged for KITACO's Brake Shoe
The price difference from that of PFP company is 300 yen
After KITACO's Shoe, I have never been bothered by crying, and I am satisfied with the effectiveness as well as Large satisfaction
Would it have been better to buy that from the beginning ...
Temporarily this Shoe can not be Recommendation
If this is the same product, you can buy what is in a simple package at 280 yen
Can not Recommendation
View detail
I am disappointed
Since it is written as 120A441-10 application, the color difference 120A441-40
I thought that it could also be used for NickelColor, but I bought it, but the thickness of Pin was big and I could not enter it. I do not know whether the Large criteria of Caliper's hole is different or whether it is a product defective item. I used useless Gold. I am disappointed.
View detail
Fits: TRIUMPH STREET TRIPLE R, TRIUMPH SPEED TRIPLE R, TRIUMPH SPEED TRIPLE R, TRIUMPH SPEED TRIPLE, TRIUMPH DAYTONA675, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, KTM 990 SUPERMOTO R, KTM 690DUKE R, KTM 1190 RC8R, KTM 1190 RC8R, KTM 1190 RC8, KAWASAKI NINJA H2R, KAWASAKI NINJA H2, KAWASAKI ZX-10R, HONDA CBR1000RR, HONDA CB1000R
Absolutely not enough braking force.
Although there is no problem on the general road, the braking force is not enough as far as to say at all in Circuit. I can not stop at the Breaking of Straight end which I usually do not mind CourseOut I want to go back and forth many times. Versus Fading system is too low for Circuit use. It is a reasonable price. View detail
SE12J CYGNUS X
CYGNUS 260 mm Brake rotor of SE 12 J : Purchase for OEMCaliper installation.
As Caliper grips only 1 cm around Rotor, Brake Shu deforms : Rotor deforms and the effectiveness of Brake becomes ineffective later.
Therefore, even if you replace Brake Shu, it is ineffective and danger Large
For a new Rotor exchange, purchase NCY's Support : Installing.
Exactly - Great.
Japan Manufacturer is less pitiable than Taiwan Manufacturer for bad product production.
Please take care about riding CYGNUS.
View detail
Fits: HONDA CMX300AAC, HONDA CMX300AC, HONDA CMX300A, HONDA CBR400R, HONDA CBR650R, HONDA CB1000R, HONDA CB650R, HONDA 400X, YAMAHA YZF-R25, YAMAHA XVS250, YAMAHA XVS250, YAMAHA XVS250, YAMAHA XVS250, YAMAHA VMAX12, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX
It is Large eyes in OEM
I exchanged it from the OEM, but it did not fit into the Tight with a slight Large eye on the Impre street of the other person.
Material is also somewhat stiff unlike OEM.
I liked it with A little Accent, but about 300 yen per piece is too expensive, durability is also unknown.
Painting by brembo or the like It might appear in Caliper but with this gold amount Quantity : 1 Set of 4pcs. So it's still three stars.
View detail
Even though there is no stock
First of all, this product was out of stock, but I am using the same product of the company, I think it is a good product.
So it can be recommended as a product.
However, simultaneous ordering of Gun meta's Single and Double, simultaneous checking of inventory of Double Manufacturer takes 5 days and no stock.
In the meantime, Single is confirmed and the same Manufacturer same color product is not available so we confirmed that it can not be canceled "Exchange at customer convenience is impossible" Answer by.
I suffer from understanding where Cancellation is due to my circumstances.
I do not bother to bother to change the color of this hand every Caliper.
And yet "Manufacturer stock out" The buyer is in a selectable state.
Whoever is shopping at here is hurrying, it is hard to place an order on hold when ordering, unless all items are available.
View detail
For acosat ...
I saw this impule and bought it for CBR 1000 RR, SC 59, AOCOSAT Lever, but Switch function did not work. (Initial failure?) I do not know.. I ordered and replaced Akosat 's one soon. And making a terminal is complicated. be careful.
View detail
Picture and color are different
It was a red Red Anodized, but it was Red that was thin like sunburn.
It may be wide and the width of the hexagon may be wide, but I can not satisfy the shading color.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
I installed this kit and GM-MOTO swing arm simultaneously. It is a kit for 8 Inches. The gap between the wheel and the caliper is about 1.5mm. I was very surprised about it although they didn't touch each other.When I tried the work of air bleeding, I
I installed this kit and GM-MOTO swing arm simultaneously. It is a kit for 8 Inches. The gap between the wheel and the caliper is about 1.5mm. I was very surprised about it although they didn't touch each other.
When I tried the work of air bleeding, I had to step on the pedal further although I tried many times. I couldn't finish it completely because the stroke amount was so deep. So after I took off the master cylinder once, checked the inside and tightened each part furthermore, I did the work of air bleeding again. But the air didn't bleed completely and the situation of the pedal remained deep.
Then when I removed the calipers and checked them, some thin rubber pieces came out from the plug hole. So I cleaned up the inside of the master cylinder and brake hose carefully. Nine rubber pieces came out from the inside.
I was so surprised about that. It made me so angry and I was really shocked about the Chinese quality. After finishing the work of air bleeding and the installation, I rode on my motorcycle. This time the braking force was increased to be doubtless and the stamping margin of the brake pedal was OK, but the subtle adjustment of the braking force was not so good.
Owing to it, it took more than half day. Although the appearance is good considering the price, about the performance, I can't say anything... It might have been unlucky in my case but I cannot recommend this product as the merit is only cheap price.
View detail
There were an Egg type thing of the Black alumite inserted in a Brake lever and one thing in which close does not have a Screw attached to this. It is troubled very much.
There were an Egg type thing of the Black alumite inserted in a Brake lever and one thing in which close does not have a Screw attached to this.
It is troubled very much.
View detail
Fits: SUZUKI SV400S, SUZUKI SV400S, SUZUKI SV400S, SUZUKI SV400, SUZUKI SV400, SUZUKI SV400, SUZUKI RF900R, SUZUKI RF900R, SUZUKI RF900R, SUZUKI RF900R, SUZUKI RF900R, SUZUKI RF900R, SUZUKI RF900R, SUZUKI INAZUMA1200, SUZUKI INAZUMA1200, SUZUKI INAZUMA1200, SUZUKI GSX250SKATANA, SUZUKI GSX250SKATANA, SUZUKI GSX250SKATANA, SUZUKI GSX250SKATANA
an outside diameter is pure although it is corresponding to SV650 -- it is 310 mm to 290 mm, and if it attaches, it keeps [ Does a pure Caliper strike on a DISC? ], and is hopeless. Since he noticed after finishing setting up mostly, it is very m
an outside diameter is pure although it is corresponding to SV650 -- it is 310 mm to 290 mm, and if it attaches, it keeps [ Does a pure Caliper strike on a DISC? ], and is hopeless.
Since he noticed after finishing setting up mostly, it is very mortifying.Even so, the idea of a SUNSTAR does not understand at all why the goods of such full-scale Brakes-custom premises are called conformity.
The idea requires special attention in order to use instead of being pure.There is no Front disk of a pure Size in a SUNSTAR.
View detail
Fits: KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr].
Although attached with 230 mm of SUNSTARs DISC, it shifts outside about 8 mm and the Pat does not suit a DISC.A Caliper support is too long although the thing for ZEPHYR750s was purchased.Although the Torque rod also puts color into the position of a
Although attached with 230 mm of SUNSTARs DISC, it shifts outside about 8 mm and the Pat does not suit a DISC.A Caliper support is too long although the thing for ZEPHYR750s was purchased.Although the
Torque rod also puts color into the position of a Center stand and has written it to be attachment straightly, it will not become straight if it attaches to the position as a description.What was necessary was just to have used
SPEC...
View detail
Delivered goods cannot use die length, being short. I cannot think the goods according to vehicle type. He never buys this manufacturer's goods.
Delivered goods cannot use die length, being short.
I cannot think the goods according to vehicle type.
He never buys this manufacturer's goods.
View detail