Reviews
Available for frando 7nb
Available for frando 7nb MechanicalSwitch, which has the same structure as brembo.
I believe only frando 7nb is available as a precaution.
The reason is that the current frando's Lineup has changed the SizeSetc.Spec. of the Pipod degree.
Also note that this is not an official usage.
View detail
Brake switch on Radipon
My hydraulic switch went bad and I was looking for a Mechanical switch and this is the one I got.
Installation was easy with the Instruction Manual.
I like it very much
View detail
MechanicalSwitch is built to not malfunction.
My previous Brake from another company broke, so I bought this product which seems to be well made in terms of safety.
It is a comparison with a certain factory-made Switch that was used before.
The 0 factory model comes with a stainless steel brake pivot pin, and the switch itself is a compact brembo.
I liked the Large variant because of its simple and stylish construction that does not destroy the design of the M3Bolt, but the M3Bolt one to BrakePivot!
So, if you run repeatedly, the switch will turn and the brake will stay on.
It happened many times, I over tightened the M3Bolt and distorted and broke the Brake switch and the Plate that holds it.
It was then physically and rationally installed and has been in use for about 6 years.
The newly purchased Switch made by Lady Bird is made to be conspicuous by the thickness and the size of the Switch which is Large, but
There is a stopper that prevents the Switch from malfunctioning, and it is well made, so I was able to install it with peace of mind.
However, it is not possible to install it only with the attached Hex wrench. Separately, 5.5mm Spanner, Wiring, Electric Works Pliers, etc. are necessary.
If you have never made a Wiring before, it may be difficult to install.
Also, since the brake switch is thick, it may interfere with the brake hose depending on the hose routing and may not be able to be installed.
I like the rugged design, but the brake switch is a prominent design, so tastes may vary.
View detail
Reverse actuation
I installed it on Ninja250 Radial master (brembo).
I installed it as per the Instruction Manual and tested the lighting.
When the brake lever is not held (SwitchON, pressed) Lights.
With the brake lever held (Switch OFF, not pressed) "Turn off"
and lights up in reverse of normal operation.
Just to be sure, I tried it with the OEM Brake switch and it works fine, normal operation (SwitchON = off, SwitchOFF = on).
Because it is not possible to run in the city as it is, the brake switch of OEM is processed in time, only the base plate of the commodity concerned is diverted, it installs, and it operates...
PartsParts itself was beautifully made, and "Less malfunctions, more reliable Switch. and the product description, but it is in a state of dissatisfaction.
View detail
It's harder to lock
SUNSTAR 230mmRotor and Quantity:I replaced it with Set Compared with the previous state, it is easier to control Brake and harder to lock It is a very good feeling on the road of Kunekune
All the shims from the Caliper center that came with the product are used Clearance is finally secured
The footpegs may need to be adjusted because the bedal has no play (I prefer to play 0.)
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSXR1000, SUZUKI GSXR1000, SUZUKI TL1000S, SUZUKI SV1000 S 03, SUZUKI SV1000 03
If you don't care about it, just the fact that it has a brembo makes you feel superior
I asked the Shop to install it When I didn't get a hit, I was scared that it was a Brake that didn't work, two and a half I think it will come out around the time Change After all, there is a sense of presence Moreover, it may be the effect double if it is made MASTER of brembo It was View detail
One of the Best Mechanical Switches Out
There's only a couple of mechanical switches out for the non-RCS Brembo radial master cylinders and this one checks all the boxes: 1. Looks good ☒ 2. Works well ☒ 3. Affordable ☒ Installation is pretty straight forward, hardest part was the trial-and-error related to which wire goes to the switch to work with the OEM harness. I would recommend this switch to anyone looking for a proper mechanical switch. View detail
brembo bracket kit
I have been miss lead this item does not include calliper and the price charged is absolutely ridiculous ! a bracket essentially for inc import duties £345 never again when I looked at item again although there is a picture of calliper with bracket kit very miss-leading be careful View detail
To work well
I used it when I made the SR into a Rear disk. Comparison is difficult because NORMAL is Drum, but it works well anyway. However, when Brake's soup arrives around the Caliper, there is also a small negative part that it is hard to get in during painting View detail