Reviews
Effective when riding in a way that keeps the rpm high.
Recommended for those who run 70-80km/h Bypass roads at or above the maximum horsepower generating RPM and are using oil cooleretc. to prevent heat buildup. 。 We are installing it on a CUB. 。 The difference is about 1/3 of the change from Oil that has run 1000 km to new Oil. View detail
Exhaust SystemBlack since I purchased it.
I installed a black exhaust system, but the exhaust pipe looked like it was floating, so I bought this. When installing it, you need rubber gloves because it is prickly. View detail
Performance is secondary …
Vantage is installed for appearance first. It just looks cool. If there is a demerit to the wrap, I will consider it, but if it looks good and claims to improve the exhaust efficiency, I will install it. I use Stainless tie wraps for mounting. I prefer the look of it so …
I start to notice fraying after about 3 years of use. I bought it for that routine. The color is good and it is made by DAYTONA, so I will choose this one next time.
View detail
(There is a slight effect at 6k to 10k rpm.
I bought it a while ago and installed it because of the cooler temperatures.
There is a slight effect at 6k to 10k rpm, but few people may be able to experience it. 。
If the RPMs drop on an uphill climb, the drop will be slightly less.
It is similar to the performance difference of replacing the Plug with a NORMAL??Windshield IRIDIUM, so there is probably only about a 1% difference? The difference is only about 1%.
The specific Merit is when you are on a Corner with a bumpy uphill gradient etc. and you are wondering whether to pull in 3rd gear or 4th gear.
A Stainless Steel Band is included, but when maintenance is a top priority, the Gold Stainless Steel needles are more convenient in some areas.
This is especially recommended for SmallEngine Displacement Volume.
View detail
Wrapping around exhaust pipe
There was a concern about heat when converting to Atech-SPL, so it was installed in the OEM exhaust pipe.
Result 3. Quantity:I used it for 5pcs. It was easy to roll with good color and little fluff.
It is fully baked but still has a sweet aroma.
View detail
For Heat Protection and Fashion
I don't want to touch the exhaust pipe that just ran and get sizzling.
I thought of various reasons why it would be dangerous for children to touch it.
I love the Parenthesis with the cloth wrapped around the Motorcycle!" was wound up with the real story!
While it gives a sense of custom at once, it also gives a sense of raggedness.
I think it looks unbearably tacky to some people.
I think it's cool! I think it's cool, so I'll pass.
When rolled up, the insulation performance is good, and it appears to provide a slight sound insulation.
I'm personally pleased with Large!
Yes, I also diverted this one to repacking sound deadening material inside the Exhaust System.
Ordinary Glass Wool would fly away, so I thought this would be a good choice.
The result was a Large success.
View detail
Fits: HARLEY-DAVIDSON
countermeasures against heat
Exhaust pipe cooks the Right leg to about Medium rare, so I bought it for good measure.
To be honest, 2.5 LE/G is only a little better at this level.
I added a heat shield to the back of the Heat Guard, put a Ceramic washer between the fixed bolt, and put a leg cover on the human side. But it is still very hot.
My favorite to look at.
The process is not difficult, but it is tedious. If you are patient and carefully soak it in water, you can roll it up beautifully.
View detail
tingle free
It can be rolled without wetting.
It does not tingle at all.
However, it might be better to wash the Motorcycle after rolling it up because it gets fluffed up.
Included are Rubber Gloves and AluminumTie Wrap.
The included AluminumTie Wrap is not tight enough, so you should purchase the Home centerAluminumHose Band in advance.
View detail
Used for heat removal measures for STREET TRIPLE.
I used this product as a countermeasure against exhaust heat for my STREET TRIPLE and it was easy to work with, just wrap it around the exhaust pipe! View detail
Fits: HARLEY-DAVIDSON Universal
Easy to use
Looks It will be dressed up.
It is also highly insulated, which improves exhaust efficiency in addition to its appearance.
It takes some ingenuity to wrap it neatly, but it has a custom feel and is satisfying.
View detail
Stainless burning cover
[How is it used?
The Stainless Steel exhaust pipe is burnt and speckled. At first I thought of cleaning it up with burn removal chemical, but it will eventually burn again and return to the same condition after use, so I decided to wrap it with exhaust wrap to hide it. The ...
Was the one you received as per Image?
It is a bit like a thick bandage. 25mm narrow was the right choice because of the tight curvature of the exhaust pipe. 50mm wide would have been difficult to wrap neatly around the tight curvature.
Was the installation difficult?
I put on rubber gloves, soaked the exhaust wrap lightly in the water in the bucket, and wound it without cutting it in advance because I did not know how much length I would use for one pc of the exhaust pipe. At the beginning of winding, I folded the end of the exhaust wrap inward a little to prevent it from unraveling. After about one and a half rolls, I fixed it tightly with Stainless Steel Tie Wrap, and after that, I wound it so that it overlapped by about 10mm while pulling the exhaust wrap lightly. The following is an example of the use of the "M" in the "M". When the wrap has been wound up to the middle, it is good to hold the wrap and turn it as if squeezing it to loosen it. When it is wound to the end, squeeze the exhaust wrap again to remove the looseness. At the last end, fold the end of the exhaust wrap inward slightly to prevent it from unraveling, as you did at the beginning of wrapping, and Tie WrapQuantity:The 2pcs were used to secure it in place.
How was your experience with it?
After starting the engine, white smoke comes out from the exhaust wrap for about 10 minutes, so you need to be careful. Even with the exhaust wrap wrapped around the exhaust pipe, it was very hot even if I touched the exhaust pipe with my bare hand for a moment, and there was a lot of heat transmitted to the heat guard. Surprisingly, the exhaust sound became a little more mild. It sounded a little muddy.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:If you just wrap the exhaust wrap while pulling it lightly, it is not loose enough, so be sure to grip the exhaust wrap in the middle and turn it to squeeze it. This procedure will take out the looseness.
Caution:Wear gloves when handling exhaust wrap with bare hands, as it is prickly and painful, and be aware that the ends of the exhaust wrap can easily come undone.
Items to buy together:Stainless Steel Tie Wrap
View detail
To hide burn marks
I was covering my SR400 with a blanket before putting on the cover, but the other day I accidentally made a scorch mark on the exhaust pipe area…
I bought and installed this Vantage to hide the scorch marks.
The Instruction Manual says that you don't need to put it in water to use it, and I think it's true, the Material was soft and didn't feel sticky.
This is the first time I've seen this kind of product in action. I'm very satisfied.
Included in the package are
ThermoVantage and Instruction Manual
Material:Stainless SteelBand*6pcs
1 pair of thin rubber gloves
View detail
For heat protection of oil cooler
I purchased this product to install an oil cooler, hoping it would prevent heat damage.
I wrapped it around the exhaust pipe of MORIWAKIMX, but we have two FSprocket up and the start was a little weak. It became a little smoother.
I will install the Meter at a later date to see how effective it is against oil temperature.
View detail
Good quality, good price!
The exhaust pipe of the rear bank is too close to the exhaust pipe of the DUCATI Exhaust System Up Type, and my thighs are going to be burnt.
There is a heat shield between the TrellisFrame, but it's only a temporary solution, and more importantly, the rear suspension is hot and definitely not good.
So I decided to roll a Vantage! So I bought it.
Vantage is a very expensive Image and I was prepared to spend about $5,000, but this product is sold by the meter and the price is cheap!
The actual distance is about 20cm, so I bought 2m and used half of it in 1m, but it was not enough. After all, it is safe to cut it longer at the time of construction.
I checked how much it changed after installation. It is natural, but the radiant heat is reduced even by one layer, and the temperature rise of the thigh and Rear suspension is suppressed. I expect the effect especially at the time of traffic jam.
The quality is good and no problem, and the price is cheap so you can recommendment.
View detail
Prevent burns!
[How is it used?
In an effort to increase the number of OffLoaders, we are co-owning a CRF125F as a RenBarrel vehicle.
The other day, when I borrowed it at the Race, I was unlucky enough to burn myself with the exhaust pipe when I fell, so I rolled up the Vantage.
Was the one you received as per Image?
As per Image
Was the installation difficult?
I wet it in water and rolled it up with some Overlap.
All locations except the start and end points are fixed with Wiring.
How was your experience with it?
It was my first time wrapping it and it was easier than it worked and didn't sting as much.
[Included Parts:were they on?
It contains 5 Stainless Steel Bands.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I like MINIMOTO's Large that even these parts are prepared reasonably.
View detail
You should've chosen this from the start.
The exhaust system of 125Scooter was leaked and I repaired it with this product, heat hardening Pate and Gold Band.
Chinese at first. (?) I wound up with a heat resistant Band of the same name, but it only lasted a week of commuting use, and soon became holey and shaggy and unusable.
However, the durability of this DAYTONA product is perfect.
View detail
Fits: HARLEY-DAVIDSON
It works as well as it should
Motive for purchasing
I bought it because I wanted to wear it almost as a matter of appearance in my case
I have a W800, but it's air-cooled, so the heat doesn't really cool down, so I hurriedly went to the Motorcycle The exhaust pipe part that sticks out in front of the car when the cover is done I've had to melt my motorcycle cover, etc., to prevent that from happening This is how I came up with the idea
Good points
It looks so much cooler now
As I had originally planned, I used the exhaust pipe to melt the motorcycle cover and other parts of the motorcycle I don't have to deal with the problem anymore
Also, when I'm running after getting wet, I can smell the amazing burning smell along with the steam, but at first I didn't want to I thought it was a good idea, but once I got used to it, I started to feel like this was a good idea
What I liked about it
I think you'll struggle to choose a length
In my case, I used it in W800, but I am familiar with a similar type Motorcycle, because someone else had purchased a similar product and asked for their opinion Quantity:Pair (for Left and Right) I bought 15 meters of it together
When I wrapped it up, it was really Exactly and not that much more
If it's too long, it's no problem to cut it off, but the expense will increase, and if it's too short, you'll have to wind it up and use it to make it more comfortable You can rewind and adjust it if it's not enough, or you can reduce the part of the roll to adjust it It is not possible to buy more and continue to roll them
So you can get a rough idea of how much you need according to the type of car and length of the exhaust pipe I felt it would be good to be there
Installation difficulty
I had quite a bit of help wrapping it around the person who told me a lot about it when I purchased it
The length of the exhaust pipe is wrapped around the pipe while stacking it 1/3 of the way I felt that I had to take into account all of those factors and choose the length
In addition, it is better to wrap the exhaust system at the intersection of the exhaust system and where there is little space between the body and It was slightly Large strange
View detail
Ossified Items! but certainly not hot!
I didn't care about the function or anything else, I bought it for fashion
Stainless Steel Band is Quantity:It came with 2pc, but I didn't use it and used Wiring to hold it in place
I was able to roll it up without it stinging without getting wet like it used to
The color is neither White nor Black, but a dull Brass-like color
I think it's a good idea because it's weird, even in Polished's pure white
It's a two-cylinder, so it's not enough for the Limit (it could have been if I had done it right):2pc. Set used
I don't particularly care for the performance, but it's certainly not hot
Even with the engine running, it can touch the exhaust pipe for a short time
View detail
I can satisfy my self-interest
XELVIS, where the temperature difference between the front and rear banks is a weak point (VT) It is used for the front exhaust pipe
It's long enough to double roll and the included Stainless Steel Band is a nice touch
Product Description Uneven color But it doesn't matter if you can burn it
The effect was to reduce overcooling and keep the water temperature gauge slightly higher than it was before installation
Maybe it's Brush-bo, but it's nice
View detail
Is it a bargain?
Because MONKEY's Exhaust System has become rusty,
I bought it for hiding rust.
It has a length of 5 meters, and I think that this price is cheap with five Stainless Steel Band..
I think that it was better to have gloves, long sleeves, long Pants, Mask when installing.
Working with short sleeves, my arms are tingling and itching itching.
Since the thickness is only this thickness, it would be nice if there was a little thinner ? ? ?
I do not know about performance (Lol)
View detail