Reviews
Earls Gear's exhaust pipe is equipped with Earls Gear's Spring
Earls Gear's Spring was stretched and I wondered whether to buy an external Universal Product, but I decided to go with Earls Gear's Spring.
Texture, Size, no doubt!
View detail
Genuine Kitaco Exhaust Spring Set 50mm
As I was starting a new project on a bike I have never worked on this is a bit of an experiment of mine. The bike was in a lot of bits and basically a rolling chassis with lots of boxes with parts inside. I decided to start at the smaller parts and this exhaust was never going to work right with it hanging off with zero support. I purchased both the 75mm and 50mm spring sets to be safe. Finding the parts for this bike was super easy as there are a lot of parts available and at a very good price. With some other parts in my order, I had everything shipped using EMS and my order arrived in 5 days from being shipped. The spring set arrived in perfect condition and was in a nice little Kitaco box. The springs are really small but do have some good strength behind them. Put it this way, the exhaust os now sitting as it should and not loose. Pretty impressive actually. Really enjoying this rebuild project. View detail
Genuine Kitaco Exhaust Spring Set 75mm
I started with a new project that I have not tried before, a Monkey bike. There were a lot of parts that were needed and I started with the most obvious ones. The exhaust was hanging off and was not great so these were one of two replacements. I went for the long ones which are a universal fitment anyway. Along with some other parts in my basket, I have them all shipped together to save on some shipping costs. Not hard parts to find as they are universal anyway. Very good value for money so lets try them. ALl my order arrived in perfect condition and was received in 5 days from being shipped from Webike warehouse. The spring set came in the Kitaco box and was in tact when I got them. The springs are nothing too fancy but do have wuite a good flex and extension on them. Fitting was easy and these were perfect for my needs. Onto the next part. Thanks Webike. View detail
Spring Replacement
Rubber replaced due to deterioration.
The difference between USYOSHIMURA and USYOSHIMURA is the color of the Rubber (USYOSHIMURA is Black)
It is neither possible nor impossible for OEMRepair Parts.
View detail
techserfu Exhaust Spring
for GPZ900Rtechserfu exhaust pipe.
It has silicon rubber and may be Rust-proof.
The techserfuOEM Product provides a sense of security.
View detail
Fits: HONDA Universal, KAWASAKI Universal, SUZUKI Universal, YAMAHA Universal
MORIWAKI OEM Product
MORIWAKI LEGENDMONSTER S2Bean-jam-filled wafers (Monaka) The Spring that came with the product was replaced due to a broken Spring.
The length was optimal and the connection was secure.
I bought several bottles as spares and put them under Seat.
View detail
Exquisite length
When I changed my Wyvern ClassicR Tail Pipe for a change of pace with a UniversalTitaniumium silencer from Yahoo!
I have always used KITACO's Exhaust Spring, but the 70mm length was not available in Size, so it was a great help.
The springs are thicker than those of KITACO, and the quality is solid, as if it were techserfu.
View detail
I know it when I see it?
I felt the ministry was of higher quality than what I had been using. View detail
Cheap and just right.
[How is it used?
When I changed the Silencer of XJR400R from MotoGEARΦ100 to K2tecΦ86, the Spring used in MotoGEAR
The exhaust pipe and silencer part could not be fixed firmly because it was about 80mm long.
We measured the length and thought that around 70mm would be just right, so we purchased this product.
Was the one you received as per Image?
I didn't look at the product carefully at first and thought it would come in Silver, but it turned out to be Black.
However, it fit surprisingly well, so I do not mind using it.
How was your experience with it?
It was fixed perfectly as measured.
To be honest, Silencer won't be out without Spring, but the one that needs to be fixed.
Fix it firmly.
[Points to note]
There is nothing special about it, but if I may say so, this kind of Spring should not be overstretched.
Before purchasing this product, I purchased MORIWAKI's 65mm, but the Spring was pulled too much and was too tight. In such a case, there is a possibility that the spring may break during driving, so please be careful.
How did it compare to other products?
Anyway, I liked that the price was low.
It is named "Chamber spring" but can also be used firmly as a 4st for Silencer.
View detail
Fits: HONDA CRF, Others , SUZUKI RM-Z250, KAWASAKI KX250
Installation of AKRAPOVIC Exhaust Spring
[How is it used?
for Repair.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy with a dedicated purchase.
How was your experience with it?
Very good
[Included Parts:were they on?
Included Parts:are not included.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Exclusive products after all
I purchased this pipe because one of the springs on the Right Side of the exhaust pipe assembly on my Wyvern ClassicR came off and was lost while driving.
It is very helpful to have them out as Repair Parts. I have ordered two spare parts.
View detail
Manufacturer difference for Silencer
I bought this 95mm silencer spring because it seemed to fit to fix the Trickster Shotgun silencer to the exhaust pipe of my Wyvern ClassicR.
The length is perfect and the Spring is easy to install because one side has a Swivel hook and the other side turns. I have purchased a different size in the past, but the Material:It is a recommendation because Spring is made of Stainless Steel and has good durability. 。
Spring hook for installation (tool) It is easier to have a
View detail
90mm is Exactly for Replacement for MORIWAKID9/L87Spring.
I am using MORIWAKI's Slip-on Silencer on my VTR-SP, but the plating of MORIWAKI's Exhaust Spring (D9/L87's caterpillar type) is weak and rusts a lot. The plating of MORIWAKI's exhaust spring (the caterpillar type of D9/L87) is weak and rusts a lot.:Unavailable for about 2pcs.
I thought it would be better to replace it, but the MORIWAKI Exhaust Spring is expensive, and even if I replaced it, it would rust again soon.
Even if we were to replace it with another company's product, there is no Exactly choice because of its subtle 89mm length and exquisitely not-too-stiff tensile strength.
So, after much research, this DRC 90mm was JUST what I was looking for. It is JUST the right feel that can completely replace it.
Quantity:1 Set of 4pcs. and the price per piece is almost half of MORIWAKI's price at the time of review.
Black chrome plating seems to be moderately rust resistant and has not rusted at all in the two years since I purchased it.
However, I can't guarantee that it will be better than MORIWAKIOEM in terms of corrosion resistance, although I can't guarantee it since it hasn't been driven much during this period.
Also, there is no resonance prevention rubber, but there is no abnormal noise with respect to the VTR.
The only drawback is that it is slightly thicker than MORIWAKIOEM (maybe 1mm thicker) and its glossy black color is quite noticeable. No one but me cares about Level, though.
If you can tolerate that, I highly recommend this product.
View detail
As expected
It is different from the usual and gives me a sense of satisfaction when I put it on and it is Parenthesis. It is a quintessential YOSHIMURA product. View detail
Rubber is long and good
I was worried about many things, but I decided on the long Rubber and Brand. View detail
As spare parts
Purchased as a spare part for aging deterioration.
The frequency of replacing the exhaust system depends on the type of touring (with or without Panira Case) several times a year.
YOSHIMURAExhaust System springs come with rubber covers with the Yoshimura logo, but after riding, the rubber covers are often damaged due to gapping.
View detail
Chamber spring
The spring of an external chamber was bent and I could not find the perfect length for it. View detail
NITRO RACING
I thought about buying a regular spring at a motorcycle parts store, but I have the expensive Nitro Racing Exhaust System installed, so I bought this spring along with the silicon tube. I am sure it will work. View detail
Replaced with a new one
[How is it used?
Exhaust System was replaced with a new spring!
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy. If you have tools, you can put it on right away.
How was your experience with it?
It is a YOSHIMURA OEM Product, so you can rest assured that it is safe.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It was rusty!
This is the spring replacement of SC40MORIWAKITitaniumium Exhaust. This part is prone to rust due to its location, so we purchased a durable DRC spring. I purchased an 83" length spring, but I would recommend a 90" length spring if you are replacing the spring in the future. When I took the measurements, it was exactly 90", so I thought that 83" would be Large sturdy (could pull about 7"), but it was quite Large and odd (with muscle aches after the work, lol). View detail