Reviews
For Silencer protection
I have always enjoyed forest road touring with gasgas EC250 as a hobby.
It is an application that sometimes runs a little HARD.
This time I bought it with the earnest desire not to add any more scratches to Silencer.
Installation is done by pulling as hard as you can on the Rubber loop.
It requires quite a few parents.
It is cool as a Design, and it Guard Silencer well as a Protector.
I was a little disappointed that it slides and moves when the light is actually turned on, and at first I was concerned about it and had to change the position of the outlet of the exhaust system every time. Recently, I have come to think that it is fine as long as it is on, and I use it as it is without fixing it.
I think it is difficult to increase the number of scratches on the Exhaust System.
I want to remove it when I get good at it.
View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
It's easy
Heat Guard installed, took me a while to figure it out because of the orientation of the Band. Please see the pictures. View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
The contents are unknown, so I will Up.
I purchased the carbon heat guard because I needed it.
[Contents] but since it is unknown, I will provide a photo of it before installation.
1.Band Quantity:2pc. Set
2.Bracket Quantity:2pc. Set
3.Bolt Quantity:2pc. Set
4.RubberWasher 4 pcs.
5.Carbon heat guardBody
6.Instruction Manual for English Version
This band can be installed with the Exhaust System installed.
Therefore, the exhaust system will not be pulled out during the process of installing the Heat Guard.
The band is fully loosened and threaded through the bracket.
The rest of the time, Heat Guard is used with Bolt and RubberWasher.
Tighten.
CBR1000RR-R with Slip-on lineTruck di
So, I will install this product.
View detail
Fits: YAMAHA BWS100, YAMAHA GRAND AXIS, YAMAHA JOG90, YAMAHA AXIS 90, YAMAHA Horizontal TypeEngine2Cycle50cc series, Others
Mufflet protector type 2
Good product and easy to install..item come with good packaging and safety..order two for my bws100..will order with webike soon View detail
AKRAPOVIC Heat shield
The AKRAPOVIC Racing Line Full Exhaust System is a must have. Of course, the heat shield effect is also perfect. It is a little expensive, but I am very satisfied with it. View detail
The thing with DURACON on the end!
I forced myself to put it on a VSTROM250SX!
The attached Screw does not fit, please refer to the second photo.
Installed better than expected, just fit!
View detail
It looks cool!
I changed from the OEM Exhaust Cover and am happy with the improved look.
No modification is required, and the Bolt can be used for OEM applications.
Recommended if you are buying for looks and not expecting weight savings.
However, I think the price is a little high for this ….
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Looks good, Parenthesis good, good to have ?????
I would run without it, but I would definitely burn myself without it. When I test drove with it on, the calf of my right leg was constantly hitting it.
I think it is made of Dry Carbon, but the price is too high compared to Exhaust System, I thought it would be better to use Wet Carbon to keep the price down.
View detail
countermeasure against standing up
Installation is easy
I expect that Damage at the time of the fall will be limited to the smallest limit.
View detail
Fits: HUSQVARNA 701 Supermoto, HUSQVARNA 701 Enduro
Can be used for 23 years
Installed on a 23 year old 701 Enduro.
I was a little hesitant to buy it because it was listed as a compatible year 16-19.
The rubber parts of the inserts need to be removed from the OEM ones and transplanted,
As a result, it can be installed without problems.
It came with two pieces of what looked like a heat-shielding Washer of two different types, though,
Only LargeSize was used between this Parts and the mounting.
(If Small size is also added, the length of Screw may not be enough.)
I like it because it is an accent and looks tighter, even though it is almost exclusively a visual part.
View detail
For dress-up purposes from OEM
[How is it used?
I was looking for a non-OEM Exhaust Cover because the OEM Exhaust Cover was dented in a fall, so I purchased one.
Was the one you received as per Image?
As per Image
Was the installation difficult?
I also purchased the OEM 18293-MN0-000 and worked on it.
How was your experience with it?
I am concerned about the clearance and strength of the hooking area with the Exhaust System side.
[Included Parts:were they on?
BrandSticker and other Included Parts:were all included.
[Was there anything that disappointed you?
That Sticker didn't put it up, even in a good way. (If you want to use Carbon fabric as it is) I thought the Brand logo was stuck on the product image without any border, not Sticker, even in a bad way.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: TRIUMPH Speed Triple, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XT660R, YAMAHA Tenere 700 Rally, TRIUMPH Speed Triple S, TRIUMPH Speed Triple R, SUZUKI SV650 Unfaired, SUZUKI SV650 Unfaired, SUZUKI SV650X, SUZUKI SV650 Unfaired, KTM 890 Duke R, KTM 690 Duke R, KTM 690 Duke IIII, KAWASAKI Z1000, KTM 1290 Super Duke R, HONDA Crossrunner, BMW S1000RR, BMW HP4, BMW S1000R
Good r&g Product
R&g product is very good material and perfectly to fit my akrapovic exhaust. Function good will buy r&g product again in the future. View detail
Exhaust SystemExhaust pipes that may be touched.
I bought this to prevent my heel from hitting the Exhaust pipe part of the Exhaust System. View detail
Exhaust pipe stepping stone injury prevention
I installed this Guard as a measure to prevent mud stains and scratches from stepping stones on the exhaust pipe. I am satisfied with the workability and cost performance of the Guard.
The only complaint is that the paint color of the Guard adheres to the exhaust pipe. Although I have some dissatisfaction with the product, I am satisfied that I have achieved my goal.
View detail
Fits: KTM EXC 250, KTM EXC 300, KTM SX 250, KTM SX 300, HUSQVARNA TE 250, HUSQVARNA TE 300, HUSQVARNA TC 250, HUSQVARNA TC 300, GASGAS EC 250, GASGAS EC 300
Chamber dent prevention
I installed it on my gasgas EC250 which I always use for forest road touring.
I decided to buy this product because I had not worn a chamber guard before and the chamber was getting dented and scratched every time I knocked the motorcycle over, even though it was effective.
The installation was surprisingly difficult, and the Chamber was already distorted, so I had to forcefully install it.
However, once installed, it has been working very well, as it has been guarding the Chamber well and the Chamber is no longer dented by small falls.
I think it is almost a must have Guard for Riders on 2-strokes!
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
The price is too high.
The price is too high.
Should be attached to Exhaust System as Included Parts:.
Parenthesis so good I bought it.
View detail
Lighter weight due to carbonization (can also be installed in 24-year model)
The 24 model ZX-6R has no major differences from the 23 model in terms of front face, meter changes, and compliance with gas emission regulations, and even when comparing videos and images, I felt that there were few changes in the others. I asked Kawasaki plaza to install the coating with the car delivered to me for maintenance.
As a result, they were able to install it without any modification.
NORMAL is made of Gold genus, so Material:Carbon will be used to reduce weight.
I thought it was well thought out with the heat shield tape attached to the reverse side of the product.
Fitting is good with no interference with Exhaust System or Cowl.
View detail
Certainly the holes don't match.
The holes do not align as shown in the previous Review.
It is made to be fastened in three places, but it can be done by cutting the holes on the exhaust system side with a sander and fastening it in two places in the front and rear. It seems to be strong enough, and the NORMAL cover looks lame. It is a good item for those who are considering to use Slip-on Silencer for vehicle inspection and are tired of this cover because it is too shabby.
If you don't mind cutting and shaving, I'd buy it.
View detail
Fits: HONDA CRF250L, HONDA CRF250M
Liquizo Pawaa foot carbon heat guardPC-18326H
I bought it because it was for crf250l and it could not be installed on the current model md47. it seems to be compatible with md38,md44. Please be careful when you buy it. View detail
What's with the mysterious OEM ring guy? For those who wonder...
The mysterious OEM parts were too mysterious for me, and I thought they could have been a little better. I was wondering if there was anything I could do to improve the performance of the car, and I found a steel plate that came with the Exhaust SystemDesign, so I bought it, It is only for dress-up. View detail