Reviews
Exhaust pipe stepping stone injury prevention
I installed this Guard as a measure to prevent mud stains and scratches from stepping stones on the exhaust pipe. I am satisfied with the workability and cost performance of the Guard.
The only complaint is that the paint color of the Guard adheres to the exhaust pipe. Although I have some dissatisfaction with the product, I am satisfied that I have achieved my goal.
View detail
Fits: KTM EXC 250, KTM EXC 300, KTM SX 250, KTM SX 300, HUSQVARNA TE 250, HUSQVARNA TE 300, HUSQVARNA TC 250, HUSQVARNA TC 300, GASGAS EC 250, GASGAS EC 300
Chamber dent prevention
I installed it on my gasgas EC250 which I always use for forest road touring.
I decided to buy this product because I had not worn a chamber guard before and the chamber was getting dented and scratched every time I knocked the motorcycle over, even though it was effective.
The installation was surprisingly difficult, and the Chamber was already distorted, so I had to forcefully install it.
However, once installed, it has been working very well, as it has been guarding the Chamber well and the Chamber is no longer dented by small falls.
I think it is almost a must have Guard for Riders on 2-strokes!
View detail
Certainly the holes don't match.
The holes do not align as shown in the previous Review.
It is made to be fastened in three places, but it can be done by cutting the holes on the exhaust system side with a sander and fastening it in two places in the front and rear. It seems to be strong enough, and the NORMAL cover looks lame. It is a good item for those who are considering to use Slip-on Silencer for vehicle inspection and are tired of this cover because it is too shabby.
If you don't mind cutting and shaving, I'd buy it.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
Cool look around Exhaust System
Purchased to complement the joint section, which was not looking good when it was replaced with the company's Slip-on Silencer.
The cover that comes with the Normal muffler is a blindfold for the silencer joint, but the Other Brand Product has no blindfold for this joint, making it look not so good.
When the cover is installed, the joint part is blindfolded and becomes the original CowlDesign.
It looks better, but the Clearance is quite Limit, and in my case, I had to pull and deform the Bracket to contact the Exhaust pipe.
View detail
Fits: HONDA CRF1100L AFRICATWIN, HONDA CRF1100L AFRICATWIN ADVSPORTS, HONDA CRF1100L AFRICATWIN ADVSPORTS DCT, HONDA CRF1100L AFRICATWIN DCT
Can not be installed at the same
Cannot be installed at the same time as OEMOP Crash Bar and Engine Guard. Cut work required when installing. View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
That's expensive.
Mr. YOSHIMURA, isn't this price too high? View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Not suitable for painting.
In a completely unnecessary place as a Heat Guard.
It is installed at One point.
On Material, even if the contractor scratches the material considerably, the groove is not so good.
The paint was crystalline and did not shrink.
I don't think it's the right choice; it's been in use for about two years.
I also managed to get a crystal coating that didn't shrink.
It is starting to peel.
View detail
Exhaust System Slider
I purchased this product in conjunction with the purchase of Full Exhaust System.
It is unclear if this will protect Silencer.
I was able to install the Refreshing without it looking too bulky.
I'm satisfied
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Dress-up parts.
The heat guard functions well and looks good. However, the band for installation is too narrow, and if you are not careful after installation, the body may gap at any moment. If possible, I would like the band included in the package to be twice as wide. View detail
Too strong to bend. (Lol)
I bought it to bend and install it on the exhaust pipe of the Left Side of my YZ250FX, but in the end I installed only the Clamp.
Well, it's good because it prevents the Moto pan from melting on contact with the Motorcycle when pressing the Motorcycle with the Saka.
The cover is sturdy like an OEM Product, and the Clamp is equally sturdy and probably Material:Stainless steel is rust-resistant and has a shiny and beautiful appearance.
View detail
Fits: HONDA dachshund, HONDA dachshund, HONDA Dax 70, HONDA Dax 70
For Export?
Is it for Ez? It cannot be installed on FOR JAPAN MODEL ones with round holes. (If it has a grid like the one in the photo, it may be OK.) View detail
I bought it.
So far, I bought the POWER BOX SUS Slip-on Silencer because it is Beautiful.
I don't think this Protector will completely protect the exhaust system, but it might help hide scratches if they occur.
Some people put it on the front of their Slip-on Silencer, but I think it's more likely to hit the back of the car when it falls.
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
It's a Dress-up!
In the event that you have any questions regarding where and the best way to get in touch with us, please do not hesitate to contact us. In the event that you've got a lot of time, you may want to take a look at the following tips to make sure you're getting the most out of your purchase. View detail
Inexpensive and perfect.
The problem is that there are no installation instructions View detail
It would be useful to have an Instruction Manual
I thought it would be easy to put on with two Bolt.
It was more complicated than the others, and I ended up referring to Yamaha's illustration picture.
I finally got around to putting it on.
I'd like an instruction manual.
View detail
Required processing
If you want to make it universal, you should consider the bracket. View detail
The price is too high
I knocked over my son's YZF-R3 (I knew it was parked behind the garage that day, but forgot about it at night, so I didn't hesitate to pull into the garage until it was too late) and the Right Side was in bad shape. I thought I would be able to get away with only the Slip-on Silencer and Side cowl (Monster energy's Sticker is a rip-off Level price), but I was naive. I bought it because I thought it would be weird if I didn't have it. 5 minutes is all it takes to install it, even if you are a beginner. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
YOSHIMURA YOSHIMURA Option Heat Guard Set
If the Center Stand is attached, you have to think about the mounting position or it will hit.
Looks Good.
View detail
Fits: YAMAHA XT250X
I changed it.
When I changed Exhaust pipe to sp tadao, Heat Guard of NORMAL did not fit well and I bought it. It was necessary to expand the hole by rubbing to install. Is it because it is an exhaust pipe of the outside? I used some brains to put the Washer of the bundle into the back of Heat Guard, but installation is easy. Parenthesis became better at a glance! If you put in the carbon parts, it will change the look of the motorcycle a little. The performance is the same as NORMAL, and it doesn't have heat because it is carbon. I was wondering if it would be a good idea to put gold on the parts that get wound by rolling. I thought it would be a good idea to put gold on it, but I changed it and the parenthesis got better. View detail
Fits: YAMAHA XT250X
enigma
It's not what I was expecting.
I bought this stuff because I put a PowerBox on my serow 250carburetor.
The pitch accuracy between the screws was not good, so it could not be installed and the hole was expanded.
(Maybe the PowerBox isn't accurate enough.)
I'm more concerned about...
I looked at it when I installed it.
The bolt is in contact with the exhaust pipe or pushing it.
On purpose? Really?
Because it is uncomfortable, I cut the tip of Screw a little and install it.
I guess it's just cheaper than OEM.
View detail