Reviews
Note to Size.
It is just an Exhaust Band.
Purchased this CB400SF nc42 2016SPMODEL OEM Exhaust Band because I lost it.
Band is Stainless Steel, but Bolt is Steel.
One sizeSmaller than this, the company's Exhaust Band just barely didn't fit and I had to buy a new one.
The π diameter or measurements are rather strictly made, so it is recommended that you measure your measurements before purchasing!
View detail
Band
This is used to attach Rubber to Silencer's fixed band to prevent scratches and vibration.
The installation is a good feeling, but I thought it would be better if it was slightly smaller so that it would be a little tighter.
I am glad to hear that the scratch and anti-vibration rubber installation went without a hitch.
View detail
Silencer replacement
Used to replace Silencer on CRM80. View detail
too expensive
Quantity in the photo:2pc. Set is in the picture.
Price for 1 pc!
Isn't 1pc.3300 yen too expensive!
View detail
Silencer band
We purchased Silencer's Band exclusively for the Manufacturer. View detail
Fixed Chamber
It is installed to fix the Chamber.
The price is not that high and it can be fixed.
The rubber cushion was too tight to be tightened. I was able to fix the cushion by forcing it.
View detail
For fixing Silencer
Purchased for use in the Band section for fixing Silencer.
It seems to be good for vibration and scratch protection. The price is not that high, so I hope it has some Rubber durability.
The product is not that expensive, but the cut ends are slanted, and I had to cut them a little to use them. I would like to see the product sold with a straight cut.
View detail
Design is good.
I bought it after checking the size carefully, but it was a little large, so I used heat resistant rubber. In the photo, Exhaust System Slider has become a leading role. Sorry about that. View detail
Lowest price
Buy from webike at Rakuten 。 I didn't think I could afford this price for Stevan, so I used my Rakuten Points to buy it
What about this pricing...this is a terrible thing to say just because it's exclusive
The Rubber that has been sold separately is even worse! A Rubber like that is $1,500! I bought my own Rubber and cut it off 。 I'd be willing to spend $1,500 if that Rubber would last a lifetime
Even if I sold a good Silencer of Sense, I would be disappointed if I was sold such a bad deal! ~
I bought Silencer, so I have to buy it
View detail
It looks like a percentage of what it looks like ...
Well, I am solid, but it will break ...
Even if it is Rubber mount, it breaks.
I broke up and bought and bought about 6 pieces for buying.
Finally Material : Stainless Steel as a product, 2. I made my own with 5 mm thick Flat bar.
Not only KIJIMA but this hand Aluminum Band is 2 mm thick, but it is a bit too thin
I think. Crack enters from the bent place and it will break.
Rib is set up.
If it is strongly good point to mention, even if it breaks, it can be used as Aluminum Material (Lol)
Shorten it to Fork band or become Bracket and send an elegant rest period
is.
Already 0. 5 I think that it will be a different evaluation if you make it thicker.
Especially if Aluminum does not have Kodawari, I would like to recommend Stainless Steel's one.
View detail
Please do not forget
People who are considering Nasalt EvoSilencer, Included Parts : There is no so let's buy it separately. Even if you only prepare the budget Silencer, let's be careful as it gains steadily in Option Parts. Because it's a special shape, I will not buy it. View detail
It is cheap but durability is a bit low
【What made you decide the purchase?】 price
【How was it actually used?】 Good, but somewhat uneasy about durability
【Was it difficult to install? (Hard parts case)】 It was easy to replace from existing Rubber.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Length adjustment carefully. Be careful not to overtight too much.
[Is there anything I was disappointed about?] durability
【Hope for Manufacturer - Please let me know if there are any improvement points】 Improve durability
【Have you compared items?】 Asia made no brand item
[Others]
OEMRubber of Stainless Steel 100 Pie Exhaust System made by Asia deteriorated and replaced.
Although there are few things to say especially because it is an exchange, we carefully adjusted the length so that it becomes Exactly to some extent
The dress is good.
Although the feeling of use is fine, there is a minute Crack in a part of the edge in 1 year of use.
It is not as good as Asia which collapsed in 2 years, but I hope I will bring it a bit more.
Is it useless because it is a harsh place where heat is also applied.
View detail
It used in order to suppress vibration of the carburetor of RGVgamma.By holding a Piping joint part by a Hanger and fixing a Hanger, since there is interference with a Frame, the Piping was attached, and interference has been cleared, when direct attachme
It used in order to suppress vibration of the carburetor of RGVgamma.By holding a Piping joint part by a Hanger and fixing a Hanger, since there is interference with a Frame, the Piping was attached, and interference has been cleared, when direct attachment of the
Taper Round-shaped Air cleaner was carried out, but the Overflow by vibration has come out.It used in order to take oscillating measures.there is also saying like this, although it is different from how to use original as a
use -- it is .
Although Overflow size was merely made to smallness after all, it has removed failing in full solution.
View detail
It was used for the muffler of a moto gear. (A vehicle type is the hornet 250) Since the caliber of the nut was working with the monkey halfway, the band of the accessory was working-efficiency & Licked and were exchanged by prevention. rusting, s
It was used for the muffler of a moto gear.
(A vehicle type is the hornet 250) Since the caliber of the nut was working with the monkey halfway, the band of the accessory was working-efficiency & Licked and were exchanged by prevention.
rusting, since it has just exchanged the other day -- etc. -- although a situation is unknown, since a main part is a stainless, it is seldom worried.
Although a bolt is a product made from steel, since plating coating is carried out once, appropriate durability is expected.
View detail
It purchased in order to attach an external muffler. Although it is necessary to adjust how to attach by pi of a muffler for oneself, I regard it as perfect in price. However, since it is not foppish touch, can it see as an ordinary muffler band t
It purchased in order to attach an external muffler.
Although it is necessary to adjust how to attach by pi of a muffler for oneself, I regard it as perfect in price.
However, since it is not foppish touch, can it see as an ordinary muffler band to the last?
View detail