Reviews
![Type V Baffle Z038.10043 [Type V Db Killer Z038.10043]](https://img.webike-cdn.net/catalogue/images/100370/20220117T0000001871_TS.jpg)
Fits: YAMAHA YZF-R25, YAMAHA FZ8, YAMAHA YZF-R3, YAMAHA YZF-R1, TRIUMPH Tiger800, TRIUMPH TIGER SPORT, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH SPEED TRIPLE, TRIUMPH SPEED TRIPLE, SUZUKI BANDIT600 (GSF600), SUZUKI DL1000 V-STROM650, TRIUMPH Daytona675, SUZUKI GLADIUS650650, SUZUKI GSX-R600, SUZUKI GSR750, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX-R1000, PIAGGIO MP3 400LT
I bought it for Cell Keto for Tapper.
I bought this to install on a used Cell Keto Taper type SCORPIONExhaust System.
The texture of the product was not a problem and the Clearance was EXACTLY as well.
I am generally satisfied with the effectiveness of the product, as it is made at a reasonable price. I felt that the product was well made by the manufacturer.
However, if you consider only the muffling effect, the φ45 UniversalBaffle made by Dexter & phi;45 that I used to use is honestly sufficient, so if you feel that the price is too high, please consider that as well.
View detail
They're cheap and they beep a little, but they beep!
The pipe inner diameter is thicker than that of the S1, so the sound is more Large-like, but I am satisfied with Large. View detail
just right
I bought it because the SS400 I bought used did not have a Baffle.
It was quite loud and annoying without Baffle in it.
After adding Baffle, it is just right for me personally, not too loud and not too quiet.
I am also satisfied with the increase in low and mid speed Torque.
View detail
![Silencer End Baffle [Standard Type]](https://img.webike-cdn.net/catalogue/10054/78922_1_l_TS.jpg)
I can tell you that I'm putting Baffle in there, in case you're wondering.
BrassExhaust System by MotorStage (63SLASH) The 57?
It probably won't fit in a 58?
I put it in a de straight tube and the experience was about the same or a little quieter than the old W3.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
I'm satisfied
I installed it on an old Short Can and it is quieter and the gauges seem to have stopped shaking and become more stable. View detail
To muffle the sound of the external Exhaust System!
[How is it used?
When I installed an external Exhaust System on my cbr600rr, it was almost intuitive Sound.
Buy this one.
Was the one you received as per Image?
The size is perfect. 2 inch type, I think.
Was the installation difficult?
Since a hole is required for fixing the inner silencer, the machining of the hole was Large strange.
How was your experience with it?
It has a slight muffling effect, but it is still noisy, so I packed two Stainless Steel Scrubbing Brushes. It is much quieter.
[Included Parts:were they on?
[Was there anything that disappointed you?
View detail
Baffle
It is a stable Jammers, so I have no complaints. m (__) m View detail
For volume control
I use it for BL-Factory's Exhaust System.
I have another M Size one and it measures close to the proximity exhaust sound measurement, according to Suma Four Pre's Volume Meter.
BL-Factory MBaffle 110dB
BL-Factory MBaffle + Automatic magic Inner baffle M Size 108dB
BL-Factory MBaffle + Automatic magic Inner baffle S Size 105dB
BL-Factory SBaffle 103dB
BL-Factory SBaffle + Automatic magic Inner baffle M Size 98dB
BL-Factory SBaffle + Automatic magic Inner baffle S Size 96dB
The result was that
View detail
Fits: HONDA monkey, HONDA monkey
Exactly
I used it for RaceGPMagnum and it was Exactly, so the volume was reasonable without any sound cracking. View detail
If you commute to work
I bought this for commuting. It's like 70% volume off of my normal volume. View detail
DF200 DJEBEL Used at Rough & Road RSVSilencer
I purchased a used RSVSilencer and installed it because it was too annoying.
BoltQuantity for installation:They said 2 pcs, but we decided to TRY with 1 pc.
The rear end of the Silencer is gradually enlarged from 3, 4.5, to 6.5mm to allow the attached M6 bolt to penetrate.
"Okay" and put it against the Silencer exit... I can't get in!"
Caliper's actual measurement was 47mm, so I bought 47mm, but 46mm seemed to be the right choice.
I inserted it by tapping it as hard as I could with the wooden handle of the plastic handles.
After the installation, the exhaust sound was very loud. Slightly more energetic NORMAL?" Ranked first.
When Idling "Chica Chica." and the Tappet sound is so good that it sounds like a HUDDRILL. This is good.
I immediately performed a test run and did not feel any extreme power down, even when I turned it as hard as I could.
Also, totally unexpectedly, the low-speed Torque was enriched.
I am satisfied with the Large change because it is quieter and easier to ride.
I found this in someone else's Review, but the Hexagonal Wrench was not attached.
View detail
It is effective
The volume did indeed drop.
It was Exactly to 54φ of Ter Minioni.
The sound quality was a little lighter, but the overall volume down and the reduction of popping sounds were very nice and not tiring.
View detail
It worked.
Used on a Silencer with a 54mm insert diameter.
The effect of lowering the volume was solid.
View detail
Significant sound quality improvement and some sound deadening
Titaniumium full exhaust and carbon silencer by techserfu were installed on a GPZ900R.
Style is good, but the volume and sound quality did not match my taste.
I purchased this product to muffle sound and improve sound quality, and to some extent, the results were as I had hoped.
As for the sound deadening effect, as everyone has said, it is about as quiet as you can get. It is not drastically quieter, but I would say that you can ride at night as long as you don't turn it all the way up.
I am satisfied with the sound quality. Before the installation, the bass sound was not very refined, but now it is like that of a big bike.
I still felt a little sluggish at high rpm, but I will continue to work on it in the future in the hope that the setting will improve it.
There was a gap of about 3mm between the Silencer and Tail Pipe, but I didn't mind that much.
This is written here and I think it is an unavoidable part of the process.
View detail
Aluminum is dirtier and less rusty
Material:I chose this one because it is aluminum and seems to be rustproof.
It is not cheap, and the precision is perfect.
View detail
Punching
This time, I changed the Silencer's punching thickness and tested the change in sound quality, etc. It turned out to be just to my liking. I used to have a 42mm diameter punching and it was a little noisy, but I changed it to 38mm and now it is a little quieter. View detail
End Baffle
I replaced my Titaniumium silencer with a slim silencer, but it was a little too loud, so I was looking for an end baffle and came across this product. The shape and diameter are good, a little tight, and it muffled the sound perfectly. View detail
Moderate muffling
It was good with moderate muffling effect.
Naturally, it fits perfectly because it is a Manufacturer's exclusive product.
View detail
I am satisfied that the volume is definitely reduced.
I used this product on an Exhaust System that was getting a little loud. It was easy to install, and I was pleased with how it reliably reduced the volume! View detail
silencer
I was looking for a silencer to use for a drag style muffler and found one with fiberglass wound on it, and it's perfect. It's the right size, and I like the pulsation and the reverberation better than just adding a baffle to block the noise. If I had known in advance, I would have installed it comfortably, but I suffered a lot because of the sound, but it is very good. I was looking for a silencer to use for a drag style muffler, and I found one with fiberglass wound on it, and it's perfect. It's the right size, and I like the pulsation and the reverberation better than just adding a baffle to block the noise. Had I known in advance, I would have installed it comfortably, but I suffered a lot because of the sound, but it is very good. View detail